Products from keine Angabe
No results were found for the filter!
With this Y-strap the Vintage Mini Leather Backpack can be easily and quickly attached to the large backpack. This way you can carry both bags at once without the need to attach them to your bike.
€12.95 *
Triumph original cable to convert the headlight from original to H4.
€39.90 *
Black is beautiful! For all who want to have everything in black in the front, you can order the Black Screw Kit in addition to our speedo & headlight lowering kit. Looks also very nice as contrast with polished lamp holders. The kit...
€13.95 *
The 755mm wide Drag Bar Alu handlebar from Rizoma is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can...
€123.00 *
The Rizoma Taperet aluminum handlebar is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. The Taperet handlebar is a classic Super Bike All Rounder handlebar. The handlebar is available in 3...
€123.00 *
This bracket is needed to mount the short Rizoma aluminum windshield CF011 on the motorcycle.
From €96.00 *
Vintage genuine leather side covers that also act as a small bag, suitable for all BMW R nine T models. The open frames of the R nine T's are not very nice, because you just have to look at the plastic air box. That's why we thought that...
€169.95 *
This bracket is needed to mount the long aluminium windshield CF010 from Rizoma on the motorcycle.
€96.00 *
The original and long intake snorkel of the BMW R nine T models belongs classically to the R9T, but by far not everyone likes it! On some machines it even looks like a foreign body and does not fit nicely to the shape of the tank. So our...
From €349.00 *
Narrow handlebar switch e.g. for switching daytime running lights on LED headlights. Fits 22mm and 1" handlebars.
€49.90 *
Original Triumph lock washer for the chain sprocket of all water cooled Triumph Modern Classic models. The plate should be replaced when replacing the sprocket for safety reasons.
€12.50 *
Original Triumph locking plate for the chain pinion. The plate should be replaced when replacing the sprocket for safety reasons.
€12.50 *
Short number plate holder for Triumph Speed Twin 1200 made of stainless steel and black powder coated. The perfect and most minimalist number plate for the original aluminium mudguard of the Speed Twin. We have made the licence plate...
€79.95 *
Round metal plate for welding into our rear arches. The plate is perfect to fix e.g. a fender and a seat. (see photos)
€14.95 *
Brass steering head nut suitable for all air cooled 2 cylinders. Can easily be exchanged for the original nut. Sets a nice color accent on the Yoke.
€44.95 *
Motone cylinder head bolt covers Roswell Style. A set (consisting of 4 pieces). The covers are simply slipped over the original bolts and then fixed and held in place with a small screw. Available in Polished & Black made from high...
From €39.95 *
Brass steering head nut suitable for all liquid cooled 2 cylinders. Can easily be exchanged for the original nut. Sets a nice color accent on the Yoke.
€44.95 *
This kit is needed to mount a new clutch cover (e.g. the ribbed one) to the motorcycle. It contains 5 original Triumph spare parts (2x Simmering, 2x bearing, 1x needle bearing).
€59.90 *
Beautiful leather knee pads for the tank of all BMW R Nine T models. These tank pads have many positive aspects. They protect the paint of the tank in the knee area, the legs have a pleasant hold on the tank & it also looks really...
€119.00 *
Beautiful leather knee pads, with diamond pattern for the tank of all BMW R Nine T models. These tank pads have many positive aspects. They protect the paint of the tank in the knee area, the legs have pleasant grip on the tank & it also...
€119.00 *
Genuine 20 liter steel petrol cans that have been painstakingly converted by hand into motorcycle side bags. There is no more stylish solution for attaching a luggage case to your motorcycle! An absolute eye-catcher on any bike and...
From €259.00 *
Genuine 5 liter steel petrol canisters that have been painstakingly converted by hand into motorcycle side bags. There is no more stylish solution for attaching a luggage case to your motorcycle! An absolute eye-catcher on any bike and...
From €199.00 *
Genuine 10 litre steel petrol canisters that are elaborately handcrafted to the motorcycle side pocket are reworked. There is no more stylish solution to get a luggage case on your motorcycle! An absolute eye catcher on every machine and...
From €239.00 *
Snap ring to fix the original or our Racing DB-Killers. Suitable for all Remus exhaust systems. Since the original snap rings can break over the years, we offer here a very high-quality stainless steel Seegering as a replacement.
€4.95 *
Aluminium windshield made of nice and solid 3mm aluminium sheet (which makes the windshield look very high quality). Long version (also available in short, see similar articles in this description). Brings optically a beautiful classical...
€234.95 *
Luggage rack pair for all BMW R Nine T models. These holding lugs are simply screwed under the fastening of the frame triangle of the BMW R9T (assembly is completed within a few seconds). These holders are perfect for lashing a luggage...
From €19.95 *
Titanium wheel bolt set for all BMW R Nine T models. Significantly lighter and with a nice look. The alloy Ti-6AL-4V is one of the best known of all titanium alloys and is used in medicine, the aviation industry, bicycles but also in...
From €39.95 *
Titanium wheel bolt set for all BMW R Nine T models. Significantly lighter and with a nice look. The alloy Ti-6AL-4V is one of the best known of all titanium alloys and is used in medicine, the aviation industry, bicycles but also in...
From €62.95 *
Mirror adapter for mounting accessory mirrors to Bonneville T100 & T120, Bobber & Speedmaster. These models do not have a conventional mirror thread in the fittings, but only a hole, therefore an additional adapter is required for...
€22.95 *
Die Thruxton 1200 hat einen wunderschönen Heckrahmen mit Rundbogen, nur man sieht nichts davon! Eine absolute Schande. Also haben wir es uns zur Aufgabe gemacht eine schlanke und kurze Sitzbank zu bauen, die den Heckrahmen der Thruxton...
€259.95 *
Zard 2-2 slip-on stainless steel exhaust for Triumph Scrambler 1200 XC & XE with E-number (for both the EU 4 and EU 5 models). The two rear silencers are positioned very close together in order to achieve the slimmest possible line. The...
From €940.00 *
Zard 2-2 Slip on stainless steel exhaust for Triumph Speed Twin & Thruxton 1200. With E-number / road legal (does not need to be registered). Attention for Thruxton 1200 / R (EU 4 models): For these models, the exhaust is not homologated...
From €1,092.00 *
Zard 2-2 Slip on stainless steel exhaust for Triumph Speed Twin & Thruxton 1200. Attention for the Thruxton 1200 WITHOUT approval. The very high-quality stainless steel silencers are really nice short and crisp and remind as their name...
From €1,044.00 *
Zard 2-1 stainless steel complete system (with manifold without KAT) for Triumph Speed Twin & Thruxton 1200. That brings performance! without ABE Very high-quality and well processed stainless steel exhaust system from ZARD, with a nice...
From €1,253.00 *
For all LSL rest systems that are supplied without a folding rest joint. This is very important for all those who prefer a more sporty ride, as the detents can also be mounted in a strong inclined position. Due to the folding joint, they...
€54.95 *
Original Öhlins strut springs in black for the original Triumph Thruxton 1200 R strut. Since the yellow does not fit to a classic Thruxton, we offer original Öhlins springs in black to rebuild the shock absorbers. We also have the...
From €139.95 *
Classic, handmade real leather luggage bags in Old School briefcase design. Optional quick-release mounting system (must be ordered separately). The perfect companion for everyday use as well as for any longer tour. The size of the bags...
€289.95 *
Original Triumph stainless steel engine guards for Scrambler 1200 XC / XE. These brackets protect the engine and partly the motorcycle from the roughest, if it times overturns or slips away. In addition, the brackets emphasize the...
€265.00 *
Original Triumph metal engine guards made of metal for the Street Scrambler. These brackets protect the engine and partly the motorcycle from the roughest when it tips over or slips away. In addition, the brackets underline the off-road...
€176.00 *
Classicbike-Raisch Badge to sew on the leather jacket, the jeans on a bag or similar. The patches are sold separately.
€2.95 *
The fork of the Thruxton 1200R is factory tuned much too tight. The rebound and compression damping is simply completely overdamped! The chassis in the front area is extremely tough and also uncomfortable. We create remedy! Change of the...
€229.00 *
High quality black t-shirt in classic, casual cut / Style: Burnout. The t-shirt has a small motorcycle / cafe racer logo on the chest and a big picture on the back with the slogan: TOO FAST TO LIVE / TOO SLOW TO DIE. See photo for sizes....
€34.95 *
High quality T-shirt in classic, casual cut / Style: Burnout. The t-shirt has a small burnout logo on the chest and a big picture on the back with the slogan: It´s better to burn out then to fade away. See photo for sizes. The t-shirt is...
€34.95 *
Wall holder made of Hold, with leather holder for your helmet! You simply plug this holder to the wall (mounting material is included) to hang your stylish helmet on the helmet holder and hang your jacket as well as your bike key on the...
€114.95 *
High quality, grey T-shirt in classic, casual cut / Style: Peace Love Motorcycles See photo for sizes. The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
€34.95 *
High quality, navy blue T-shirt in classic, casual cut / Style: Two Wheels Move The Soul See photo for sizes. The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
€34.95 *
Adjustable, CNC milled aluminium footrest system for the BMW R9T Classic Euro3 & Euro4 models. This footrest system is made of high quality aluminium, which is also used in aircraft construction. Even if it is optically only details, it...
From €619.00 *
10mm turn signal arm extension for the Kellermann Atto turn signal and turn signal/rear light combination. Perfect when indicators are too close to each other and do not maintain the minimum distance required by law. Or you simply want...
€7.95 *
Hot Rod complete exhaust system for Bonneville T120 / T100 & Street Twin with E-number. The exhaust system is ONLY approved for the Bonneville T120. Euro 5 models from 2021: On these models, the exhaust also fits. However, it is NOT...
€1,699.00 *
A pair of nice narrow LED indicators (inclsuive mount) for the JVB Moto Racer rear. The turn signals are with E-number.
€99.00 *
Matching cell rubber seat plate for the BMW R9T JVB Moto Racer rear.
€54.00 *
Perfectly fitting turn signal holder for the BMW R9T JVB Moto Racer rear. This mount is perfect for mounting the beautiful and small Moto Gadget LED Pin turn signals (see accessories in this description) to the JVB Moto Racer rear.
€74.00 *
JVB Moto lamp mask with headlight insert (in 4 different versions) for mounting on the R9T Classic with USD fork. Fits both Euro3 and Euro4 models. The lamp mask is made of very high quality ABS plastic and is perfect for painting! The...
From €329.00 *
A motor protection belongs to every RnineT model. The cooling fins or the oil filter can be damaged by stone chips or when driving up and down the curb. The JvB-moto engine guard is pure minimalism - only as long and as wide as...
From €179.00 *
This plug can easily be plugged Plug & Play into the original wiring harness of the R9T. It only has to be connected to the new rear light and the license plate light. In other words it is not necessary to cut off the original wiring...
€17.95 *
GFK Racer Rear suitable for all R9T models gives each R9T a completely new look. We have often been asked if there is a Plug&Play solution to completely change the rear of the R9T. Finally they are here now. The Racer rear is delivered...
€420.00 *
A few nice small LED indicators (with E-number) including metal housing. Through the metal housing, the turn signals can be screwed directly to the original fittings and are then almost no longer noticeable. Only when you turn on the...
From €119.00 *
Motogadget M.View Flight handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The...
€129.00 *
Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass....
€99.00 *
Motogadget M.View Street handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror...
€99.00 *
Motogadget M.View Road handlebar ends mirror in a sporty classic oval design(road legal) for 22mm & 1" handlebars. These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The...
€99.00 *
Motogadget M.View Sport mirror (street legal!) in a sporty angular design, as the name already says. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25...
€129.00 *
Motogadget M.View Club mirror (street legal!) in a classic oval design. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw...
€99.00 *
Motogadget M.View Classic Mirror (street legal!) i classic round design paired with latest and most modern technology. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x...
€99.00 *
The M.Grip is a universal aluminium handlebar for all common handlebar diameters with 1 inch or 22 mm (7/8 inch) tube diameter. These grips are perfect in conjunction with the Motogadget handlebar ends mirrors & turn signals, as these...
€139.00 *
The m.grip soft is a universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in an attractive look. These grips are perfect in combination with the Motogadget handlebar ends mirrors & indicators, as these have...
€39.00 *
Motogadget M.View Race mirror (street legal with ECE!) in an angular design for all who like it sporty towards racers, as the name already says. Suitable for any normal mirror mount with thread. In the scope of supply different threads...
€129.00 *
The M.View Bar Clamp mirror adapters allow the mounting of all mirrors with M10 x 1.25 thread (this is the standard thread for accessory mirrors) on motorcycles without a mirror thread in the fittings. Or for customizers who want to give...
€29.00 *
Original Triumph 3D sticker. The lettering is 130 mm long and 20 mm high (on the sheet it is still. The 3D style (sticker is raised and made of thick plastic) gives the sticker a particularly high-quality look. Perfectly suitable for...
€69.00 *
The right look for every scrambler! On a reasonable Off Road Scrambler conversion, you simply need a raised front wheel fender as you know it from any Cross machine. The holder is made of stainless steel to guarantee a long durability...
€58.95 *
The right look for every scrambler! On a reasonable Off Road Scrambler conversion, you simply need a raised front wheel fender as you know it from any Cross machine. The holder is made of stainless steel to guarantee a long durability...
€58.95 *
Magura HC1 radial brake pump in complete black including black brake lever. Ø18mm piston diameter (optimal for the Thruxton R) with certificate for easy registration. The topic of the wandering pressure point, which leads to an unsafe...
From €309.95 *
K&N air filter dummies pair. For the look as if open single air filters had been used, but this was 100% legal. Fits to all R9T models. Since the original K&N air filters are unfortunately not exactly cheap (alone the cost over 130€) the...
€174.95 *
BMC sports air filter as a replacement or exchange for the original if it is worn out. The air filter offers a much better airflow than the original paper filter, which provides more power. However, the engine can only do more with the...
From €79.00 *
Genuine leather strap with solid snap hook in antique gold tone. The strap is perfect to attach it on one side to your biker wallet, and on the other side to your trousers. So nobody can steal your wallet anymore and it also looks noble....
€35.95 *
A very solid & high quality genuine leather key fob, with a thick metal hook in antique gold. We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this...
€20.95 *
Protect your good pedals from the gear lever! These shoe protectors made of real leather, you simply pull yourself over the shoe to protect it. Who doesn't know it? A fast round with the good shoes and zack one has a Macke in the shoe....
€34.95 *
Protect your good kicks from the gearshift! A somewhat simpler variant to the shoe protectors we already have in the program. Do not look quite as chic as the shoe protector, but fulfill their purpose just the same and are even easier to...
€24.95 *
Beautiful magnetic genuine leather tank bag (handmade!) made of thick buffalo full leather, the big brother of the old tank bag. The tank bag can be used as a tank bag, as a rear bag (extra straps included) or as a shoulder bag. In...
€169.95 *
Finally there is a really chic and high quality cell phone case as magnetic version for the tank. The case is made of high quality buffalo leather, the workmanship is really great. Of course the case is also touchscreen friendly, so you...
€39.95 *
Beautiful magnetic real leather tankbag (Handmade!) Probably the most beautiful and practical tankbag you can buy. The genuine leather bag is attached to the tank with 6 strong magnets. Simply practical! Put it on and it is already...
€109.95 *
Take all your essentials with you for a short ride on your bike, without full pockets or a backpack on your back. This handcrafted genuine leather bag is easily attached to your thigh and belt with its adjustable strap. Does not disturb...
€114.95 *
A pair of CNC milled fork clamps for mounting turn signals, suitable for all R9T models (except R9T Classic) The clamps can easily be attached to the fork tubes within a few minutes. At the included turn signal holder every accessory...
€56.95 *
Set of 10 cable fixers. The cable holders have a 5er drilling and can be fastened with it at each M5 screw. Then simply place the desired cable over it and bend the tab.
€7.95 *
The Magura Mx handlebar is the handlebar that gives the rider the most control and power over the motorcycle and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also comfortable sitting position....
€109.95 *
NGK spark plug connectors for all water cooled models. Since not very nice, dark red plugs are used as standard (which are very eye-catching), we offer here nice black plugs, which are less noticeable. The price is for a single plug....
€8.95 *
The Magura Mx handlebar (suitable for all 22mm bikes) is the handlebar that gives the rider the most control and power over the bike and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also...
€109.95 *
Engine cover emblems in UK-Jack design, for the clutch and generator cover. Fits all water-cooled models.
From €49.95 *
The adapter ring is needed to install the J.W. Speaker headlight into the original 7" headlight of the Bonneville or Thruxton. Since the ring is easily visible from the outside, it is available in black or chrome (depending on your...
From €156.00 *
Engine cover emblems in classic ribbed design, for the clutch and generator cover. Fits all water-cooled models.
From €49.95 *
This CNC-milled aluminium lamp ring replaces the original ring of your Triumph (please select model in the selection) and can be replaced Plug&Play very quickly. Especially the silver accents give the headlight on the Bobber that certain...
€139.00 *
Das Kabelkit mit längeren Zügen, Leitungen & Kabeln wird benötigt, um den hohen Ape-Hanger oder einen anderen sehr breiten oder hohen Lenker an der Bobber & Speedmaster zu verbauen.
€139.00 *
Since the original headlight on the R9T Racer is very big and makes the beautiful half-shell look clumsy, Jens from JVB has come up with something really nice. This kit contains a nice small 5 3/4 LED headlight (with daytime running...
€565.00 *
This wiring harness is needed to the LED headlight for the R9T racers to switch from low beam to daytime running light. There are no modifications to the wiring harness necessary (except a lead to the daytime running light). A switch...
€39.90 *
Beautiful & noble steering head nut which can be easily exchanged for the original chrome-plated one. By milling from the full and the beautiful accent holes, the nut makes something real. Especially the black one!
From €50.00 *
To be able to remove the DB killer on IXIL exhaust systems, a welding spot must be drilled out and milled away. Who does not want to do this work yourself, it can be ordered here with it. After that you can then fix our Racing DB-Killer...
€60.00 *
To use the DB-Killer on the Zard exhaust system, a fine welding spot has to be drilled out and milled away. Afterwards the exhaust has to be reworked at the guide for the Segering. If you don't want to do this work yourself, you can...
€50.00 *
To be able to remove the DB-Killer from the Remus exhaust system, a locking plate must be removed (welding seams must be milled away for this purpose). Afterwards the DB-Killer has to be clamped into the lathe again in order to remove...
€65.00 *
Viewed