Schnelle Lieferung mit DHL
Service und Beratung
Lieferung in 20 Länder weltweit
Hotline +49(0)5242-906137
Filter
Close filters
1 From 2
No results were found for the filter!
Lowering speedo & headlights Thruxton 1200
Lowering speedo & headlights Thruxton 1200
This lamp holder kit moves the original headlight and speedometer of the Thruxton 1200 models further down. Very often and for a long time we sat in front of our Thruxton and thought that this is a sharp bike! But something just does not...
From €114.95 *
CB11866
Lowering speedo & headlights Speed Twin
Lowering speedo & headlights Speed Twin
This lamp holder kit lowers the original headlight and speedometer of the Triumph Speed Twin. Very often and for a long time we sat in front of our Speed Twin and thought it was a nice bike! But something just does not fit. Something is...
From €114.95 *
CB11868
NEW
Swing Arm black powder coating
Swing Arm black powder coating
Black is beautiful! The original swingarm has a rather unsightly die-cast surface look, which doesn't look very noble! It is also silver. To give the swingarm a nice & smooth surface in black, we also offer powder coating in black...
€250.00 *
CB11960
License plate holder Short Scrambler 1200
License plate holder Short Scrambler 1200
Short license plate holder for Triumph Scrambler 1200 XC & XE made of 3mm aluminium and black powder coated. The perfect and most minimalistic license plate for the original aluminium fender of the Triumph Scrambler 1200. The holder...
€84.95 *
CB11856
License plate holder Short Speed Twin
License plate holder Short Speed Twin
Short licence plate holder for Triumph Speed Twin 1200 made of aluminium and black powder coated. The perfect and most minimalistic license plate for the original aluminium fender of the Speed Twin. The holder replaces the ugly and much...
€69.95 *
CB11930
Cylinder head screws Cover Roswell
Cylinder head screws Cover Roswell
One set (4 pcs.) cover for the original cylinder head screws in Roswell design. Since these covers are made of brass, they will become especially beautiful with time, when they get their patina. The covers are simply put over the...
€54.95 *
CB11843
High Mount Front Fender/Mudguard Bracket LC
High Mount Front Fender/Mudguard Bracket LC
The right look for every scrambler! On a reasonable Off Road Scrambler conversion, you simply need a raised front wheel fender as you know it from any Cross machine. The holder is made of stainless steel to guarantee a long durability...
€54.95 *
CB11616
Eingine cover Uk-Jack
Eingine cover Uk-Jack
Engine cover emblems in UK-Jack design, for the clutch and generator cover. Fits all water-cooled models.
From €49.95 *
CB11575
Eingine cover ripped
Eingine cover ripped
Engine cover emblems in classic ribbed design, for the clutch and generator cover. Fits all water-cooled models.
From €49.95 *
CB11574
Thruxton R Cafe Racer alloy front mudguard
Thruxton R Cafe Racer alloy front mudguard
Aluminium front fender for Thruxton 1200 R including bracket. Many have waited longingly for a really nice narrow fender, which lies flat over the front wheel and has the exactly fitting length. Finally there's a matching fender for the...
From €189.00 *
CB11527
Fork bridges Thruxton 1200 black powder coating
Fork bridges Thruxton 1200 black powder coating
BLACK BLACK BLACK. The Thruxton 1200 R / RS & TFC have a really nice polished upper triple clamp, but not many people like that. If you like to have your triple tree (top & bottom) powder coated in black, you can send us your finished...
€130.00 *
CB11961
Sprocket Cover black powder coating
Sprocket Cover black powder coating
If you don't like the original silver on your sprocket cover, you can send us your cover and we will coat it in black (RAL9005). Attention! Only possible for models which have a metal RItzelcover, not possible for plastic parts. Duration...
€45.00 *
CB11962
Heel GUards black powder coating
Heel GUards black powder coating
If you don't like the original silver of the heel guards on your footrests, you can send us your own and we will coat it in black (RAL9005). The price is for one pair. Duration until you get the part back is about 2 - 3 weeks.
€40.00 *
CB11963
Uk Jack Injection Cover
Uk Jack Injection Cover
Some beautiful covers for the injection system of the Triumph Bonneville T120, Thruxton 1200, Bobber & Speedmaster in Union Jack design. A design that can be perfectly pulled through the bike. With matching engine covers and engine...
From €49.95 *
CB11446
Short Rear Fender Kit Bobber
Short Rear Fender Kit Bobber
A short mudguard for the bobbers, which replaces the original, quite long turned out one, as well as the gigantic traffic light system is omitted. The mudguard is unpainted, can be painted as desired or simply installed, the metal look...
From €669.00 *
CB11411
Raisch Short Alu Rear Fender Kit
Raisch Short Alu Rear Fender Kit
The Aluko wing kit gives every Bonneville (T100 & T120) and all StreetTwin models the right old school look. As almost no one likes the huge original traffic light system, but many do not want to do without a nice classic fender, we have...
From €300.00 *
CB11296
HeckWeck Kit Speed Twin Version 1
HeckWeck Kit Speed Twin Version 1
Rear Eliminator Kit Triumph Speed Twin / Version 1: Indicators are mounted inside the shock absorber. With this rear the Speed Twin looks much sportier and lives up to its name. The rear becomes a bit shorter by the fender which is...
From €289.00 *
CB11744
HeckWeck Kit Speed Twin Version 2
HeckWeck Kit Speed Twin Version 2
Rear alarm kit Triumph Speed Twin / Version 2: turn signals are mounted on the license plate holder. With this rear the Speed Twin looks much sportier and lives up to its name. The rear becomes a bit shorter by the fender which is...
From €289.00 *
CB11745
HeckWeck Kit Thruxton Version 2
HeckWeck Kit Thruxton Version 2
Rear alarm kit Thruxton 1200 + Thruxton R / Version 2: Indicators are mounted directly on the license plate holder. This should look like a horny tail at the Twins. Precise own manufacturing from aluminum and then black coated. 100%...
From €289.00 *
CB10948
HeckWeck Kit Street & Bonni Modells
HeckWeck Kit Street & Bonni Modells
Heck-Weck Kit Version 1 for StreetTwin, StreetCup, StreetScramler, Bonneville T100 & T120. This should look like a horny tail at the Twins. Precise own manufacturing from aluminium and then black coated. 100% perfect fit. By the rear...
From €289.00 *
CB11198
HeckWeck Kit Thruxton Version 1
HeckWeck Kit Thruxton Version 1
Rear alarm kit Thruxton 1200 + Thruxton R / Version 1: Indicators are mounted on the inside of the suspension strut. This should look like a horny tail at the Twins. Precise own manufacturing from aluminum and then black coated. 100%...
From €289.00 *
CB10947
Lucas Tail Kit LC
Lucas Tail Kit LC
Lucas tail light rear kit. Fits StreetTwin, Street Scrambler, Street Cup, Bonneville T120 & T100 (but can not be used on the Bonnevilles with the original seat, but works with the benches you will find in the accessories) The kit is...
€169.95 *
CB11402
Fork covers Bobber
Fork covers Bobber
A pair of Gaeblrohr covers in black powder coated suitable for the Bobber & Bobber Black (please choos). Due to the cover the fork looks much more massive (because it looks wider), which makes the fork look much better and gives you a...
From €67.90 *
CB11582
Thruxton / Scrambler Fork black anodize
Thruxton / Scrambler Fork black anodize
Many do not like the original gold of the Thruxton R / RS / Scrambler fork so well. Thats why we offer you an anextoxes to the Gaeblrohre. For this the dismantled, dismantled & cleaned fork tubes must be sent to us. Or you choose the...
From €259.95 *
CB11136
Leather Bag side panel
Leather Bag side panel
Leather bags as replacement for the original side lid (this is simply removed and replaced by the leather bag). Genuine Italian handmade by Wild Hog from heavy, robust leather. 25 x 23 x 10 cm. This is still real leather quality as you...
€194.95 *
CB11107
Rear Eliminator Kit Thruxton LC
Rear Eliminator Kit Thruxton LC
Tailgate Eliminator Kit Thruxton 1200 + Thruxton 1200 R. A sleek rear with a beautiful LED taillight, highlighting the sporty Thruxton line. Precisely made stainless steel and then black coated. 100% fit and TUEV compliant, does not have...
From €249.00 *
CB11023
Half shell for Thruxton all colors
Half shell for Thruxton all colors
Cafe Racer Half-shell Thruxton - A wonderful half-shell made of injection-molded. The perfect cover for a cafe-racer look. Available in various triumph colors. The kit has a set of deeper stubs. These are, however, NOT necessary, it can...
€980.00 *
CB10846.1
Ripped Cover Injection
Ripped Cover Injection
Some beautiful covers for the injection system of the Triumph Bonneville T120, Thruxton 1200, Bobber & Speedmaster in ripped design. A design that can be perfectly pulled through the bike. With matching engine covers and engine covers in...
From €49.95 *
CB11614
Steering head nut CNC black Bobber
Steering head nut CNC black Bobber
CNC machined steering head nut in deep black anodized, which replaces the original chromed nut. Can simply be exchanged Plug & Play. Fits to all modells except the Thruxton R
€24.95 *
CB11408
Steel Front Fender Bobber
Steel Front Fender Bobber
Metal front fender for the bobbers. Can be exchanged Plug&Play. Can be painted if necessary or simply installed in the Steel look (but must then be painted with clear varnish and powder coated, otherwise the steel will rust). Harmonizes...
From €249.00 *
CB11413
Reflector Cover Triumph LC
Reflector Cover Triumph LC
Covers for the original reflectors on the fork. Reflectors are mandatory! Fits all Triumph models. Who likes the flashy orange reflectors on the fork? Right, nobody! First thought - just take them off! BUT Triumph doesn't make them for...
€59.90 *
CB11407
Fork Cover Bobber
Fork Cover Bobber
The fork end plugs replaced the original silver cover, which many did not like because they prefer to have a black and clean look. Fits to Bobber and Speedmaster (not for Bobber Black) In conjunction with black fork covers these caps...
From €59.90 *
CB11409
Forkcover including turn signals for Bobber
Forkcover including turn signals for Bobber
The original, shiny and slightly narrow stanchions are perfectly concealed by this teif black anodized fork cover. Because of this, it seems as if a fat fork is installed in the motorcycle. You also get a clean black look. The covers are...
€179.00 *
CB11418
Cover chainring
Cover chainring
CNC milled, deep black anodized sprocket covers (suitable for Bobber, Bonneville T120 & Speedmaster), that cover the original sprocket elegeant. Fits perfectly together with the chain guard covers (see accessories). Attention: only fits...
€139.00 *
CB11416
Cover chain guard Bobber
Cover chain guard Bobber
CNC machined, deep black anodized chain protection covers, which are mounted on the original chain guard + glued. The covers make of the shabby original chain guard a noble-looking, milled part.
€79.90 *
CB11415
Cover rear brake caliper Bobber
Cover rear brake caliper Bobber
CNC machined, deep black anodized cover for the rear brake caliper, which ensures a clean look. Does not cover the not very nice brake caliper perfectly.
€149.00 *
CB11417
Rizoma Alu Mudguard
Rizoma Alu Mudguard
Alu mudguard suitable for the original recordings on the Bonnevile T100 & T120. The fender is slimmer and shorter than the original. Who knows Rizoma, who knows what high quality the parts have. All aluminum parts are matt-finished and...
€149.00 *
CB11260
Rizoma Alu Mudguard Thruxton R
Rizoma Alu Mudguard Thruxton R
Short aluminum front wheel mudguard with bracket. The fender is slimmer and shorter than the original and above all the holder is clearly more beautiful than the chunky original. Who knows Rizoma, who knows what high quality the parts...
€199.00 *
CB11255
Rizoma Alu Rear Mudguard BL & SI
Rizoma Alu Rear Mudguard BL & SI
Aluminum mudguards for Bonneville and StreetTwin models. Fitting to the front wheel fender, Rizoma also has a rear wheel fender in the same aluminum finish. The mudguard is supplied with plug and play with mounting brackets and screws....
€235.00 *
CB11264
Stripe front fenders AC
Stripe front fenders AC
GFK mudguards suitable for the original bracket fits on Bonneville T100 + T120 & all Street models. The fender has a very nice shape plus the elegant stiffeners in the middle and around the edge. The result is very high quality. Not as...
€145.00 *
CB11217
Alu side cover Street & Bonneville
Alu side cover Street & Bonneville
Aluminium side lid with integrated real leather bag in brown, suitable for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler. On the one hand, the side covers are much nicer than the original ones, because they are simply...
From €240.00 *
CB11505
Alu side cover Street & Bonneville
Alu side cover Street & Bonneville
Handcrafted aluminium side covers Made in Italy, for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler. The lids give both the Bonneville and all Street Twin models a much nicer side view. The covers are much smaller than the...
From €144.95 *
CB11213
Licensplate Holder site ways Bobber
Licensplate Holder site ways Bobber
It must look like a real Bobber! In the case of a bobber, the license plate simply belongs to the side and not to the mudguard. The holder only very noble CNC fed and black anodised. Optionally, there is a holder for all who want to use...
€349.00 *
CB11182
Licens holder side ways LC
Licens holder side ways LC
Thruxton Thruxton, BonnevilleT120 + T100, and all StreetTwin models (does not fit with Thruxton R if the original struts are installed) attached to the strut. For all who have their license plates on the side and on the middle height of...
From €164.95 *
CB11092
Short Heavy Duty Alu Mudguards LC
Short Heavy Duty Alu Mudguards LC
Alu Bobber fender in the heavy duty short style for Bonnie T100 + T120 & all street models. What does that mean ? This mudguard is made of solid solid (made of 3mm thick aluminum). These mudguards feel really high quality and at the...
€134.95 *
CB11158
License plate holder Horst adjustable
License plate holder Horst adjustable
The license plate holder model Horst is an angle adjustable bracket for mounting on the fender. Includes license plate illumination and turn signal mount on the holder (suitable for all turn signals with M6 & M8 thread). Concentrator...
€59.95 *
CB11406
Heavy Duty Rear Fender LC
Heavy Duty Rear Fender LC
This Alu Rear Fender for Bonneville and Street models. The Fender is made of thick, high-quality aluminum and can be screwed on to Bonneville T100 + T120 and all street models. It replaces the chunky and long original fender. Turn signal...
€174.95 *
CB11293
Alu Rear fender
Alu Rear fender
A very neat and noble aluminum fender suitable for the StreetTwin, Cup, Scrambler Bonneville T100 & T120. Works very well with a smaller taillight (the rear lights for the old triumphs also fit all). The fender comes around, so you can...
€189.95 *
CB10938
Rear Loop LC
Rear Loop LC
Rear round arch / Loop including clamping sleeves for all water cooled Bonneville & Street models. The absolute classic, but also the most elaborate and beautiful of the rear conversions! Beside the optical aspect the connection of the...
From €99.00 *
CB11741
Alu front fender StreetTwin
Alu front fender StreetTwin
A very high-quality and noble processed aluminum fender suitably for all Street Twin and Bonneville LC models The fender comes pre-drilled. So it is plug&play to install. The narrow fender lies flat over the tires and makes the front...
€119.95 *
CB10939
Alu Mudguard Thruxton / Speed Twin
Alu Mudguard Thruxton / Speed Twin
This aluminum front fender replaces the simple plastic fender on the Thruxton 1200 & Speed Twin (Plug&Play to replace). The surface of the fender is beautifully polished, which looks great on any cafe racer. The Speed Twin already has an...
€119.95 *
CB11530
Ripped Cover Brass Style
Ripped Cover Brass Style
Ripped Cover for the left + right engine cover, as well as for the brass injection bar. The covers are all exchanged within shortest time with 2 or 3 screws. The covers all have a really cool vintage look due to their polished surface.
From €65.95 *
CB11705
UK Jack Cover Brass Style
UK Jack Cover Brass Style
Union Jack Cover for the left + right engine cover, as well as for the brass injection bar. The covers are all exchanged within shortest time with 2 or 3 screws. The covers all have a really cool vintage look due to their polished surface.
From €65.95 *
CB11704
Smart Heck for StreeT & Bonneville
Smart Heck for StreeT & Bonneville
A nice crisp and short tail all Street & Bonneville LC models Perfect for all those who find the original fender and the Kz mount too big and bulky, but still want a bit of fender. The kit comes with all brackets, mounting hardware and...
€219.95 *
CB10904
Sideway licens plate support Swingarm LC
Sideway licens plate support Swingarm LC
Raisch side license plate holder including LED license plate illumination. Small, discreet & inconspicuous. This is what a side license plate holder must look like. Nice and close to the wheel with a round license plate so that the...
€99.95 *
CB11838
Fork feets Thruxton 1200 R / RS black painting
Fork feets Thruxton 1200 R / RS black painting
If you don't like the original silver fork feet on your thruxton, you can simply have it coated black by us. Just send the disassembled fork to us and you will get it back with black fork feet. If you can't do the disassembling yourself,...
€130.00 *
CB11965
High Mount Alu Mudguard Scrambler 1200
High Mount Alu Mudguard Scrambler 1200
This 2mm thick aluminum fender, from the Triumph original accessories, is mounted underneath the original fork bridge of the Scrambler. This will give you the right Off Road Scrambler look! Because an Off Road motorcycle has the front...
€200.00 *
CB11823
Roswell Öl Screw
Roswell Öl Screw
Oil filler plug made of high pressure cast aluminium. The screw can easily be exchanged for the original one. Can be tightened by hand or with an Allen key. Black powder coated and then hand polished to get the nice contrast between...
From €37.95 *
CB11737.1
Roswell Öl Screw
Roswell Öl Screw
Oil filler plug made of high pressure cast aluminium. The screw can easily be exchanged for the original one. Can be tightened by hand or with an Allen key. Black powder coated and then hand polished to get the nice contrast between...
€37.95 *
CB11973
Short Front Mudguard Bobber & Speedmaster
Short Front Mudguard Bobber & Speedmaster
Short steel front fender in glossy black lacquer. If you want a more radical look and the original long fender is a thorn in your side, you should use this short original Triumph fender. Supplied complete with bracket.
From €159.00 *
CB11546.2
Water Cooler Grid UK Jack
Water Cooler Grid UK Jack
Protective grille for the water cooler in UK Jack design. This grille makes the not exactly beautiful and above all not popular water cooler on our beloved Classic Twins clearly more handsome! Unlike most providers, this is not a simple...
€149.90 *
CB11518
Rizoma Licensholder Fox Speed Twin
Rizoma Licensholder Fox Speed Twin
The Rizoma license plate holder "FOX" with license plate illumination has been the absolute classic in the motorcycle industry for years and convinces without many words by its sophisticated adjustment system and perfectly matured...
€179.00 *
CB11896
Oil screw
Oil screw
Oil screw Mattchrome or in black. CNC milled
€21.90 *
CB00485
Twinton headlight with speedometer mounting
Twinton headlight with speedometer mounting
The Twinton 7" headlight for Triumph Bobber & Speedmaster, allows the original speedometer of the motorcycle to be mounted almost plug & play in the headlight. The headlight is available as a simple H4 bulb headlight or as a modern LED...
From €749.00 *
CB11913.1
Controller Cover
Controller Cover
Controller cover. Very nice cover for the regulator with UK Jack. It is guaranteed that with this version sufficient wind comes to the regulator
€37.90 *
CB00487
Chain Guard Tanto
Chain Guard Tanto
A very nice and slim chain guard, made of high quality stainless steel. The chain guard can be easily replaced with the original one in a few minutes.
€54.95 *
CB11921
Injector cover Triumph ripped
Injector cover Triumph ripped
Original cover for the injection system from Triumph in a ribbed design as a replacement for the original part. The noble Triumph emblem enhances the appearance of the already beautiful injection system a little bit. Fits Thruxton1200,...
€55.00 *
CB10841
Injection cover Triumph
Injection cover Triumph
Original cover for the injection system from Triumph as a replacement for the original part. The noble Triumph emblem enhances the appearance of the already beautiful injection system a little bit.
€50.00 *
CB10840
Engine cover badge Triumph
Engine cover badge Triumph
Engine cover emblems for clutch & generator cover in black, chrome and matt brushed. The cast aluminium emblem discreetly underlines the design of your machine. For mounting on your Triumph machine instead of the standard part. Fits all...
From €37.00 *
CB10783
Engine cover badge Triumph ripped
Engine cover badge Triumph ripped
Engine cover emblems in ripped design as a replacement for the original. The cast aluminium emblem discreetly underlines the design of your machine. Available in chrome, black and silver matt. Fits all water-cooled Triumph models.
From €43.00 *
CB10784.3
Rizoma Öl Einfüllschraube Triumph
Rizoma Öl Einfüllschraube Triumph
Öl Einfüllschraube von Rizoma, für alle Triumph Modelle. Für alle die es besonders Edel mögen, ist die Schraube von Rizoma genau das richtige. Denn alle Rizoma Produkte werden aus sehr hochwertigem Aluminium hergestellt und haben eine...
€50.50 *
CB11918
Swing hole Cover
Swing hole Cover
Rizoma cover for the hole on the swingarm, on the left side of the bike. This way you don't look at the unattractive nut anymore and you have a clean and closed swingarm. Turned from billet aluminum and anodized in black or silver.
€30.00 *
CB11908
Öl Einfüllschraube Crown
Öl Einfüllschraube Crown
Hochwertige, CNC gefräste Alu Schraube in tief schwarz eloxiert. Einfach gegen die originale Schraube austauschen.
€24.95 *
CB11834
Tail light replacement Scrambler / Speed Twin
Tail light replacement Scrambler / Speed Twin
These brushed Triumph aluminum plates replace the original rear light of the Scrambler 1200 and Speed Twin (Please choose in the selection for which model the kit should be for). This makes it possible to use a combination of blinker and...
€100.00 *
CB11816
LED taillight + turn signal conversion Scram 1200
LED taillight + turn signal conversion Scram 1200
This Triumph LED rear light allows you to mount the Scrambler 1200 indicators on the rear light instead of the original license plate holder. In addition the original taillight is replaced by a nice small LED taillight. You can either...
€100.00 *
CB11833
Street Scrambler number plate.
Street Scrambler number plate.
A scrambler simply needs a number plate. With this board you can give the Steet Scram a real competition look. Just stick your own or your favourite start number on it and that's it!
€44.00 *
CB11565
Short GFK Front Fender Bobber
Short GFK Front Fender Bobber
GFK front mudguard for the bobbers to paint. Can be exchanged Plug&Play. Shorter than the original and without bead.
€189.00 *
CB11692
Relocation kit Horn for Bobber
Relocation kit Horn for Bobber
With this kit, the original horn, which sits in front of the radiator is placed behind the radiator, to get a clean front.
€19.90 *
CB11419
Ignition lock housing Bobber CNC
Ignition lock housing Bobber CNC
CNC machined housing for the original Bobber ignition. Including relocation kit on the left side. The ribbed design of the case nestles perfectly in the look of the cooling fins of the motorcycle.
€89.90 *
CB11420
Universal license plate holder
Universal license plate holder
Universal identification holder for mudguards. The license plate is universal for many mudguards. It is screwed from the inside to the fender (see photo)
From €29.95 *
CB11294
Ripped Side Cover painted LC
Ripped Side Cover painted LC
A pair of high-quality ABS plastic side covers in ripped style with a shiny or matt black finish. The three slotted ribs give the side lids a really classic sporty look. A nice little side effect is that the bike also gets a little more...
€219.95 *
CB11754
Heavy Duty Alu Mudguard LC
Heavy Duty Alu Mudguard LC
Aluminum mudguard polished or black in heavy duty style, for Bonneville T100 + T120 & StreetTwin, Cup + Scrambler. What is Heavy Duty? This fender is made of really solid (made of 3mm thick aluminum). These fenders feel really high...
€134.95 *
CB11364
Sprocket cover Cover
Sprocket cover Cover
A small insert which makes a lot of sense. The plate is simply clamped in front of the grille of the pinion cover (takes about 2-3 minutes to mount). Fits only Bonneville T120
From €14.95 *
CB10956.1
Cooling system cover
Cooling system cover
Since the new carts unfortunately do not get along without water coolers, there are at least nice covers. The assembly is very easy and done in 2-3 minutes. Fits for Bonnie, Thruxton & StreetTwin
€34.95 *
CB10954
Clutch Cover Cover
Clutch Cover Cover
Coupling cover cover as replacement for the original ones for Thruxton, Bonnie & StreetTwin The covers are made of aluminum and the different motives there are also from aluminum (partly milled) which one sticks on. Holds wonderful and...
€39.95 *
CB10953
Light Machine Cover Cover
Light Machine Cover Cover
The cover is used as a replacement for the original ones for Thruxton, Bonnie & StreetTwin The covers are made of aluminum and the different motives there are also from aluminum (partly milled) which one sticks on. Holds wonderful and...
€34.95 *
CB10952
Injection Mold Cover
Injection Mold Cover
There are also suitable covers for the injection rail for the engine covers. The emblems are single. For Thruxton & Bonneville 1200
€15.95 *
CB10955
Regulator cover Uk-Jack
Regulator cover Uk-Jack
Controller cover. Very nice cover for the regulator with UK Jack. CNC milled. It is ensured that in this version enough driving force comes to the controller
€29.95 *
CB10957
GRP front fender for StreeT (unpainted)
GRP front fender for StreeT (unpainted)
GRP fender for 18 front wheel at the Street Twin
€99.95 *
CB10903
Injection side cover black
Injection side cover black
Injection moulding plates black. They are simply exchanged for the original ones. I won't be a minute.
From €40.00 *
CB10842
Triumph Aluminum Chain Guard
Triumph Aluminum Chain Guard
Alu chain guard for Triumph Thruxton 1200 models & SpeedTwin A very noble chain guard made of aluminum. Available in silver, anthracite & black.
€114.00 *
CB10868
Front Fork Fork Thru Thruxton
Front Fork Fork Thru Thruxton
Front Fork Fork - The Thruxton gives a sporty look.
€100.00 *
CB10850
CNC oil filler cap
CNC oil filler cap
CNC milled aluminum oil filler cap with laser-engraved logo and vertical knurling for easy removal.
€25.00 *
CB10814
Cylinder head screw caps black, silver & antrahzit
Cylinder head screw caps black, silver & antrahzit
Head screw covers. Four CNC milled covers Cylinder head screws with discreet Triumph logo. Fits Thruxton1200, Thruxton1200 R, Bonnie T120 & StreetTwin
€50.00 *
CB10787
Clutch cable holder
Clutch cable holder
CNC milled clutch cable guide made of aluminum as a replacement for the standard part. With laser-engraved Triumph logo.
From €35.00 *
CB10788.1
Ornamental bracket / Crash bar
Ornamental bracket / Crash bar
Prefabricated decorative bow set from the Triumph original accessories. The temples look cool on the one hand (let the engine look a little more powerful) and can also protect in the event of a fall from coarse damage & scratches on the...
€245.00 *
CB10802
Motordeckelkit black, chrome & brushed
Motordeckelkit black, chrome & brushed
Complete set of engine side covers as a replacement for standard parts. Fits with all LC modells
From €388.00 *
CB10760.2
Pinion cover chrome
Pinion cover chrome
High-quality pinion covers. Fits for Bonnie T120 & StreetTwin
€109.00 *
CB10774
Chain protection perforated chrome & black
Chain protection perforated chrome & black
Prefabricated steel chain guard with holes. Fits for Bonnie T120 & StreetTwin
€89.00 *
CB10776
1 From 2
Viewed