Schnelle Lieferung mit DHL
Service und Beratung
Lieferung in 20 Länder weltweit
Hotline +49(0)5242-906137
Filter
Close filters
No results were found for the filter!
Lowering speedo & headlights Speed Twin
Lowering speedo & headlights Speed Twin
This lamp holder kit lowers the original headlight and speedometer of the Triumph Speed Twin. Very often and for a long time we sat in front of our Speed Twin and thought it was a nice bike! But something just does not fit. Something is...
From €114.95 *
CB11868
Lowering speedo & headlights Thruxton 1200
Lowering speedo & headlights Thruxton 1200
This lamp holder kit moves the original headlight and speedometer of the Thruxton 1200 models further down. Very often and for a long time we sat in front of our Thruxton and thought that this is a sharp bike! But something just does not...
From €114.95 *
CB11866
License plate holder Short Speed Twin
License plate holder Short Speed Twin
Short license plate holder for Triumph Speed Twin 1200. The perfect and most minimalistic license plate for the original aluminium fender of the Speed Twin. The holder replaces the ugly and much too long original plastic license plate...
€69.95 *
CB11856
HeckWeck Kit Street & Bonni Modells
HeckWeck Kit Street & Bonni Modells
Heck-Weck Kit Version 1 for StreetTwin, StreetCup, StreetScramler, Bonneville T100 & T120. This should look like a horny tail at the Twins. Precise own manufacturing from aluminium and then black coated. 100% perfect fit. By the rear...
From €289.00 *
CB11198
HeckWeck Kit Thruxton Version 2
HeckWeck Kit Thruxton Version 2
Rear alarm kit Thruxton 1200 + Thruxton R / Version 2: Indicators are mounted directly on the license plate holder. This should look like a horny tail at the Twins. Precise own manufacturing from aluminum and then black coated. 100%...
From €289.00 *
CB10948
HeckWeck Kit Thruxton Version 1
HeckWeck Kit Thruxton Version 1
Rear alarm kit Thruxton 1200 + Thruxton R / Version 1: Indicators are mounted on the inside of the suspension strut. This should look like a horny tail at the Twins. Precise own manufacturing from aluminum and then black coated. 100%...
From €289.00 *
CB10947
HeckWeck Kit Speed Twin Version 2
HeckWeck Kit Speed Twin Version 2
Rear alarm kit Triumph Speed Twin / Version 2: turn signals are mounted on the license plate holder. With this rear the Speed Twin looks much sportier and lives up to its name. The rear becomes a bit shorter by the fender which is...
From €289.00 *
CB11745
HeckWeck Kit Speed Twin Version 1
HeckWeck Kit Speed Twin Version 1
Rear Eliminator Kit Triumph Speed Twin / Version 1: Indicators are mounted inside the shock absorber. With this rear the Speed Twin looks much sportier and lives up to its name. The rear becomes a bit shorter by the fender which is...
From €289.00 *
CB11744
Lucas Tail Kit LC
Lucas Tail Kit LC
Lucas tail light rear kit. Fits StreetTwin, Street Scrambler, Street Cup, Bonneville T120 & T100 (but can not be used on the Bonnevilles with the original seat, but works with the benches you will find in the accessories) The kit is...
€169.95 *
CB11402
Fork covers Bobber
Fork covers Bobber
A pair of Gaeblrohr covers in black powder coated suitable for the Bobber & Bobber Black (please choos). Due to the cover the fork looks much more massive (because it looks wider), which makes the fork look much better and gives you a...
From €67.90 *
CB11582
Leather Bag side panel
Leather Bag side panel
Leather bags as replacement for the original side lid (this is simply removed and replaced by the leather bag). Genuine Italian handmade by Wild Hog from heavy, robust leather. 25 x 23 x 10 cm. This is still real leather quality as you...
€194.95 *
CB11107
Rear Eliminator Kit Thruxton LC
Rear Eliminator Kit Thruxton LC
Tailgate Eliminator Kit Thruxton 1200 + Thruxton 1200 R. A sleek rear with a beautiful LED taillight, highlighting the sporty Thruxton line. Precisely made stainless steel and then black coated. 100% fit and TUEV compliant, does not have...
From €249.00 *
CB11023
Half shell for Thruxton all colors
Half shell for Thruxton all colors
Cafe Racer Half-shell Thruxton - A wonderful half-shell made of injection-molded. The perfect cover for a cafe-racer look. Available in various triumph colors. The kit has a set of deeper stubs. These are, however, NOT necessary, it can...
€980.00 *
CB10846.1
Reflector Cover Bobber
Reflector Cover Bobber
Covers for the original reflectors on the fork of the bobber. Reflectors are required! Who likes the eye-catching orange reflectors on the fork? Right, nobody! First thought just go away with it! BUT Triumph does not do that for fun....
€59.90 *
CB11407
Forkcover including turn signals for Bobber
Forkcover including turn signals for Bobber
The original, shiny and slightly narrow stanchions are perfectly concealed by this teif black anodized fork cover. Because of this, it seems as if a fat fork is installed in the motorcycle. You also get a clean black look. The covers are...
€179.00 *
CB11418
Cover chainring
Cover chainring
CNC milled, deep black anodized sprocket covers (suitable for Bobber, Bonneville T120 & Speedmaster), that cover the original sprocket elegeant. Fits perfectly together with the chain guard covers (see accessories). Attention: only fits...
€139.00 *
CB11416
Fork Cover Bobber
Fork Cover Bobber
The fork end plugs replaced the original silver cover, which many did not like because they prefer to have a black and clean look. Fits to Bobber and Speedmaster (not for Bobber Black) In conjunction with black fork covers these caps...
From €59.90 *
CB11409
Cover chain guard Bobber
Cover chain guard Bobber
CNC machined, deep black anodized chain protection covers, which are mounted on the original chain guard + glued. The covers make of the shabby original chain guard a noble-looking, milled part.
€79.90 *
CB11415
Cover rear brake caliper Bobber
Cover rear brake caliper Bobber
CNC machined, deep black anodized cover for the rear brake caliper, which ensures a clean look. Does not cover the not very nice brake caliper perfectly.
€149.00 *
CB11417
Alu side cover Street & Bonneville
Alu side cover Street & Bonneville
Aluminum side covers for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler. The silk covers are a pair and in the beautiful matte finish.
From €209.95 *
CB11213
Alu side cover Street & Bonneville
Alu side cover Street & Bonneville
Aluminum side covers for Bonneville T100 & T120 as well as StreetTwin, Cup & Scrambler. The silk covers are a pair and in the beautiful matte finish.
From €240.00 *
CB11505
Licensplate Holder site ways Bobber
Licensplate Holder site ways Bobber
It must look like a real Bobber! In the case of a bobber, the license plate simply belongs to the side and not to the mudguard. The holder only very noble CNC fed and black anodised. Optionally, there is a holder for all who want to use...
€349.00 *
CB11182
Licens holder side ways LC
Licens holder side ways LC
Thruxton Thruxton, BonnevilleT120 + T100, and all StreetTwin models (does not fit with Thruxton R if the original struts are installed) attached to the strut. For all who have their license plates on the side and on the middle height of...
From €164.95 *
CB11092
Rear Loop LC
Rear Loop LC
Rear round arch / Loop including clamping sleeves for all water cooled Bonneville & Street models. The absolute classic, but also the most elaborate and beautiful of the rear conversions! Beside the optical aspect the connection of the...
From €99.00 *
CB11741
Sideway licens plate support Swingarm LC
Sideway licens plate support Swingarm LC
Raisch side license plate holder including LED license plate illumination. Small, discreet & inconspicuous. This is what a side license plate holder must look like. Nice and close to the wheel with a round license plate so that the...
€99.95 *
CB11838
Roswell Öl Screw
Roswell Öl Screw
Oil filler plug made of high pressure cast aluminium. The screw can easily be exchanged for the original one. Can be tightened by hand or with an Allen key. Black powder coated and then hand polished to get the nice contrast between...
From €37.95 *
CB11737.1
Water Cooler Grid UK Jack
Water Cooler Grid UK Jack
Protective grille for the water cooler in UK Jack design. This grille makes the not exactly beautiful and above all not popular water cooler on our beloved Classic Twins clearly more handsome! Unlike most providers, this is not a simple...
€149.90 *
CB11518
NEW
Twinton headlight with speedometer mounting
Twinton headlight with speedometer mounting
The Twinton 7" headlight for Troumph Bobber & Speedmaster, makes it possible to mount the original speedometer of the motorcycle almost plug & play in the headlight. This gives the front of the bike a very clean look, as the entire area...
€749.00 *
CB11913
Injector cover Triumph ripped
Injector cover Triumph ripped
Original cover for the injection system from Triumph in a ribbed design as a replacement for the original part. The noble Triumph emblem enhances the appearance of the already beautiful injection system a little bit. Fits Thruxton1200,...
€55.00 *
CB10841
Injection cover Triumph
Injection cover Triumph
Original cover for the injection system from Triumph as a replacement for the original part. The noble Triumph emblem enhances the appearance of the already beautiful injection system a little bit. Fits Thruxton1200, Thruxton1200 R &...
€50.00 *
CB10840
Engine cover badge Triumph ripped
Engine cover badge Triumph ripped
Engine cover emblems in ripped design as a replacement for the original. The cast aluminium emblem discreetly underlines the design of your machine. Available in chrome, black and silver matt. Fits all water-cooled Triumph models.
From €43.00 *
CB10784.3
Engine cover badge Triumph
Engine cover badge Triumph
Engine cover emblems for clutch & generator cover in black, chrome and matt brushed. The cast aluminium emblem discreetly underlines the design of your machine. For mounting on your Triumph machine instead of the standard part. Fits all...
From €37.00 *
CB10783
Öl Einfüllschraube Crown
Öl Einfüllschraube Crown
Hochwertige, CNC gefräste Alu Schraube in tief schwarz eloxiert. Einfach gegen die originale Schraube austauschen.
€24.95 *
CB11834
LED taillight + turn signal conversion Scram 1200
LED taillight + turn signal conversion Scram 1200
This Triumph LED rear light allows you to mount the Scrambler 1200 indicators on the rear light instead of the original license plate holder. In addition the original taillight is replaced by a nice small LED taillight. You can either...
€100.00 *
CB11833
Rücklicht Ersatz Scrambler 1200
Rücklicht Ersatz Scrambler 1200
Mit diesem Triumph original Umbaukit, kann man die Blinker vom Nummernschildhalter an den hinteren Alu Kotflügel versetzen. Außerdem wird das originale Rücklicht durch die Alu Platte, mit eingraviertem Triumph Logo ersetzt. Anstelle des...
€100.00 *
CB11816
Street Scrambler number plate.
Street Scrambler number plate.
A scrambler simply needs a number plate. With this board you can give the Steet Scram a real competition look. Just stick your own or your favourite start number on it and that's it!
€44.00 *
CB11565
Relocation kit Horn for Bobber
Relocation kit Horn for Bobber
With this kit, the original horn, which sits in front of the radiator is placed behind the radiator, to get a clean front.
€19.90 *
CB11419
Ignition lock housing Bobber CNC
Ignition lock housing Bobber CNC
CNC machined housing for the original Bobber ignition. Including relocation kit on the left side. The ribbed design of the case nestles perfectly in the look of the cooling fins of the motorcycle.
€89.90 *
CB11420
Ripped Side Cover painted LC
Ripped Side Cover painted LC
A pair of high-quality ABS plastic side covers in ripped style with a shiny black finish. The three slotted ribs give the side lids a really classic sporty look. A nice little side effect is that the bike also gets a little more air. The...
€219.95 *
CB11754
Sprocket cover Cover
Sprocket cover Cover
A small insert which makes a lot of sense. The plate is simply clamped in front of the grille of the pinion cover (takes about 2-3 minutes to mount). Fits only Bonneville T120
From €14.95 *
CB10956.1
Cooling system cover
Cooling system cover
Since the new carts unfortunately do not get along without water coolers, there are at least nice covers. The assembly is very easy and done in 2-3 minutes. Fits for Bonnie, Thruxton & StreetTwin
€34.95 *
CB10954
Clutch Cover Cover
Clutch Cover Cover
Coupling cover cover as replacement for the original ones for Thruxton, Bonnie & StreetTwin The covers are made of aluminum and the different motives there are also from aluminum (partly milled) which one sticks on. Holds wonderful and...
€39.95 *
CB10953
Light Machine Cover Cover
Light Machine Cover Cover
The cover is used as a replacement for the original ones for Thruxton, Bonnie & StreetTwin The covers are made of aluminum and the different motives there are also from aluminum (partly milled) which one sticks on. Holds wonderful and...
€34.95 *
CB10952
Injection Mold Cover
Injection Mold Cover
There are also suitable covers for the injection rail for the engine covers. The emblems are single. For Thruxton & Bonneville 1200
€15.95 *
CB10955
Regulator cover Uk-Jack
Regulator cover Uk-Jack
Controller cover. Very nice cover for the regulator with UK Jack. CNC milled. It is ensured that in this version enough driving force comes to the controller
€29.95 *
CB10957
Chain Guard Aluminum for Thruxton Silver & Black
Chain Guard Aluminum for Thruxton Silver & Black
Filigree Chain Guard for Triumph Bonneville, Steet Models & Thruxton. Is it in silver & in black.
€49.95 *
CB10906
Injection side cover black
Injection side cover black
Injection moulding plates black. They are simply exchanged for the original ones. I won't be a minute.
From €40.00 *
CB10842
Triumph Aluminum Chain Guard
Triumph Aluminum Chain Guard
Alu chain guard for Triumph Thruxton 1200 models & SpeedTwin A very noble chain guard made of aluminum. Available in silver, anthracite & black.
€114.00 *
CB10868
Cylinder head screw caps black, silver & antrahzit
Cylinder head screw caps black, silver & antrahzit
Head screw covers. Four CNC milled covers Cylinder head screws with discreet Triumph logo. Fits Thruxton1200, Thruxton1200 R, Bonnie T120 & StreetTwin
€50.00 *
CB10787
Clutch cable holder
Clutch cable holder
CNC milled clutch cable guide made of aluminum as a replacement for the standard part. With laser-engraved Triumph logo.
From €35.00 *
CB10788.1
Ornamental bracket / Crash bar
Ornamental bracket / Crash bar
Prefabricated decorative bow set from the Triumph original accessories. The temples look cool on the one hand (let the engine look a little more powerful) and can also protect in the event of a fall from coarse damage & scratches on the...
€245.00 *
CB10802
CNC oil filler cap
CNC oil filler cap
CNC milled aluminum oil filler cap with laser-engraved logo and vertical knurling for easy removal.
€23.00 *
CB10814
Motordeckelkit black, chrome & brushed
Motordeckelkit black, chrome & brushed
Complete set of engine side covers as a replacement for standard parts. Fits with all LC modells
From €388.00 *
CB10760.2
Pinion cover chrome
Pinion cover chrome
High-quality pinion covers. Fits for Bonnie T120 & StreetTwin
€109.00 *
CB10774
Chain protection perforated chrome & black
Chain protection perforated chrome & black
Prefabricated steel chain guard with holes. Fits for Bonnie T120 & StreetTwin
€89.00 *
CB10776
Valve cover chrome & black
Valve cover chrome & black
Valve cover designed as an alternative to the standard part. Fits Thruxton1200, Thruxton1200 R, Bonnie T120, Street Modelle & Bobber / Speedmaster
€130.00 *
CB10769
Chain protection chrome
Chain protection chrome
Steel chain guard in high-gloss chromed version Fits for Bonnie T120 & StreetTwin
€125.00 *
CB10773
Alternator Cover Ripped LC
Alternator Cover Ripped LC
Ribbed alternator cover suitable for all LC models (900cc & 1200cc engines except Thruxton TFC, RS & Scrambler ) in 50s design. Made of die-cast aluminium in black, silver matt & polished available. The sealing surfaces are naturally...
€289.95 *
CB11599
Clutch Cover Ripped LC
Clutch Cover Ripped LC
Ribbed clutch cover suitable for all LC models (900cc & 1200cc engines) in 50s design. Made of die-cast aluminium in black & polished available. The sealing surfaces are naturally milled (a seal is included). The dimensions are identical...
From €479.95 *
CB11844.1
Viewed