No results were found for the filter!
Rizoma 3D Brake & Clutch Lever Triumph LC
3D milled brake & clutch lever of the noble forge Rizoma with ABE. Highest quality and detail infatuation as you are used to from Rizoma. By modern milling technology all Rizoma milled parts get a very special surface, very fine milling...
Magura HC1 brake pump for Thruxton R
Magura HC1 radial brake pump in complete black including black brake lever. Ø18mm piston diameter (optimal for the Thruxton R) with certificate for easy registration. The topic of the wandering pressure point, which leads to an unsafe...
From €309.95 *
Rizoma liquid container WAVE
Rizoma Wave Brake Fluid Reservoir WITH ABE. Made of high quality billet aluminum with a perfectly integrated glass insert. The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is...
Rizoma liquid container
Rizoma NEXT Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or...
Rizoma liquid container NEXT
Rizoma NEXT Brake Fluid Reservoir WITH ABE. Made of high quality billet aluminum with a perfectly integrated glass insert. The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is...
Brakepads Speed Twin front
Lucas brake pads Triumph Speed Twin for the original front brake. The brake pads are available in 2 versions. Variant 1 Sinter SV road pads: These brake pads are the simplest sinter pads with road approval but do not have the best...
From €50.00 *
Brakepads Thruxton R front
Lucas brake pads Thruxton 1200 R, Scrambler 1200 XC & XE for the original front brake. The brake pads are available in 4 versions. Variant 1 Sinter SV road pads: These brake pads are the simplest sinter pads with road approval but do not...
From €39.95 *
Brake kit double disc
Double disc brake kit for Thruxton 1200 and Bonneville T120. Consists of: 2x Raisch 4 piston brake caliper + 2x floating brake disk with black interior starter + brake lines + brake pads. Now you are braked at a completely different...
€1,249.00 * €1,416.00 *
Cover compensating tank ThruxtonR
Billet aluminum cover for the expansion tank suitable for the Thruxton R. Replaces the original, bell-shaped plastic cover. The perfect solution for those who do not want to change the whole container when they can not vent the brake.
Cover compensating tank Street models
Billet aluminum cover for the expansion tank fits all StreetTwin models. Replaces the original, simple plastic cover. The perfect solution for those who do not want to change the whole container when they can not or do not want the brake...
Raisch 4-Kolben Bremszange LC
RAISCH brake caliper with four pistons, made in Germany by ABM. CNC-milled, pearlescent blasted, black matt anodized and with lasered Raisch logo. Perhaps the most beautiful brake caliper on the market. Fits StreetTwin, Bonneville T100,...
Cover rear brake caliper Bobber
CNC machined, deep black anodized cover for the rear brake caliper, which ensures a clean look. Does not cover the not very nice brake caliper perfectly.
Brake line extension 40mm Street models
40mm long brake line extension for the Triumph Steet Twin models. With ABE. With this extension you have the possibility to mount a wider handlebar, e.g. the Fat Bar handlebar (see accessories in this description).
Brake fluid DOT4
250ml DOT 4 brake fluid for almost all brakes. The content of 250ml is normally sufficient for a brake fluid change on the motorcycle. Price per litre: 19,80
Content 0.25 Liter
Brake Caliper Kit Thruxton R
Brake pads with DLC coating. Permanently removes the problem of the migrating pressure point. Price is for one brake. Attention from model year / year of construction 2018 these brake pistons are already built into the Thruxton R ex works.
Stahlbus Venting Valve
Ventilation valve. From Stahlbus Germany. Blast the brakes with great care, without any help from others or other ventilation aids. Works perfect. Further explanations can be found here: http://www.stahlbus.de/cms_content.php?cID=1003
Brake pads rear LC
Lucas brake pad for the original rear brake caliper. Available as organic or sintered brake pad. The sintered brake pads have a better braking effect than the organic ones. Our clear recommendation is therefore the sintered brake pads,...
From €29.95 *
Brake pads front for original tongs
Lucas brake pads for original front brake (Bonneville T120 + T100, Street-Twin-Cup-Scrambler, Bobber & Thruxton 1200) Variant 1 Sinter SV road surfaces: These brake pads are the simplest sinter pads with road approval but do not have the...
From €39.95 *
Brake lining for Raisch 4 piston pliers LC
Lucas brake pads front for the Raisch 4-piston brake caliper The rubbers are available in 4 variants. Variant 1 Sinter SV road surfaces: These brake pads are the simplest sinter pads with road approval but do not have the best braking...
From €39.95 *
Brake disc floating
Brake disc floating for Bonneville T120 & T100, Thruxton 1200 & R , Streettwin/Cup/Scrambler, Bobber & Speedmaster. This is what the new models need, because the original brake discs are rigid and therefore can not expand during warming...
CNC machined Triumph brake fluid cap
Beautiful CNC milled cover for brake fluid reservoir. The finest surface and appearance due to the two-colour design. This cover is first coated black and then clamped again in the milling machine and milled again, so that you get the...
Brake fluid tank milled
Stainless steel brake fluid reservoir. A matching holder is included.
Brake & clutch lever CNC milled
Noble milled brake levers from LSL. Adjustment and lever can be selected in different colors.
Brake fluid cover UK Jack milled
High quality aluminum in black or chrome. On the top is a milled UK Jack perfect for our british motorcycles. We recommend to order the stainless steel screws to tighten the lid (see accessories in this description).
Triumph Brake fluid reservoir LC
Triumph original brake fluid reservoir milled from billet aluminum and black anodized. Can be easily replaced with the original one. The aluminium tank looks much more noble than the original plastic tanks.
From €90.00 *
Stainless steel screws for brake covers
Stainless steel screws 2 heads for mounting the brake cover BONNIE. Replaces the rust-proof original cross-head screws, which are quickly gilded, and look cheap.
From €2.99 *
CNC machined Brake Caliper Stahlbus Cap Brakepads Speed Cover Brake fluid Rizoma liquid Triumph Brake Brake clutch Rizoma 3D Brake Brake fluid Brake pads rear Cover rear Raisch 4-Kolben Brake line Brake lining Brake disc Brake pads Brake fluid Brake kit Rizoma liquid Stahlbus ABM Wunderkind Cover Rizoma liquid Stainless steel Brakepads Magura HC1