No results were found for the filter!
One pair of black handlebar end caps for all water cooled Triumph models with 22mm or FatBar handlebars. The caps have a recess in the shape of the original handlebars and can easily be slid over the ends for plug&play. They are fixed...
€39.95 *
CB11950
The 755mm wide Drag Bar Alu handlebar from Rizoma is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can...
€105.00 *
CB11903
The Rizoma Taperet aluminum handlebar is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. The Taperet handlebar is a classic Super Bike All Rounder handlebar. The handlebar is available in 3...
€105.00 *
CB11905
Fat bar handlebars, what does that mean? That means that the handlebars have a diameter of 28.6 mm at the clamp and then taper outwards, leaving only 22 mm at the fittings. This ensures that the handlebars & the clamping area no longer...
€89.95 *
CB11852
The ergonomic one. "1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 835mm width (exact dimensions see photo). The Flat Track handlebar is 110mm high and cranked upwards (similar to the Old School...
€69.95 *
CB11620
The Cruiser! 1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 950mm width (exact dimensions see photo). The beach bar has a chic flat line and gives the bike a really cool chopper look by the bend...
€85.95 *
CB11617.1
The Flat & Width! "1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 1020mm width (exact dimensions see photo). The Wide Bar has a very flat line, is really wide and relatively straight. The photos...
€69.95 *
CB11618
The comfortable width! Our recommendation. "1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 1005mm width (exact dimensions see photo). The Old School Bar is really nice wide and has a 115mm high...
From €69.95 *
CB11619.1
Handlebar riser pair optionally as 20 mm and as 30 mm riser. Original is the handlebar of the motorcycles simply much too low. Therefore we offer here a simple and favorable variant, in order to get the handlebar higher (not everyone...
From €34.95 *
CB11212
LSL triple clamp kit for Thruxton 1200, R & RS. CNC milling technology in perfection. This triple clamp allows the use of a 28 mm fatbar (for Thruxton R). For the normal Thruxton with 1" clamp. Mounting for a much more relaxed sitting...
From €449.00 *
CB11049.2
Rizoma Race Retro handlebars with TÜV part certificate. This classic M handlebar from Rizoma is a fat bar handlebar, which means that it has 28.6mm in the middle (at the handlebar clamp) and goes down to 22mm on the outside. With the...
€179.00 *
CB11897
CNC machined steering head nut in deep black anodized, which replaces the original chromed nut. Can simply be exchanged Plug & Play. Fits to all modells except the Thruxton R
€24.95 *
CB11408
In chrome or black LSL Handlebars Sporttourer-Clubman 1 , or 22 mm 70 cm wide, sporty cranked.
From €59.95 *
CB11134
One pair of cranked handlebar risers for all models with 1" / 22mm or 28,6mm FatBar handlebars (please select the size). The 22 & 28,6mm versions are only available in black. This makes the handlebars a little higher and closer to the...
€159.95 *
CB11539
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is...
€40.50 *
CB11312
High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually...
€50.50 *
CB11310
Rizoma aluminium handlebar Riser CNC milled and black anodized. WITH TÜV part certificate For all Fat Bar handlebars, which are 28,6mm in the middle. As you know it from Rizoma, the risers are also of the highest quality. The Riser is...
€100.00 *
CB11898
Original Triumph handlebar brace for the Scrambler 1200 XC / XE The Cross brace underlines the Scrambler / Cross handle of a Street Scrambler skillfully. In the motocross area, these struts are used to give the handlebar more stiffness...
€78.00 *
CB11831
Original Triumph handlebar brace for different Triumph models & handlebars. Fits the following models with original handlebars: Air cooled: Bonneville T100, Bonneville SE & Scrambler / Water cooled: Bonneville T100+T120, StreetTwin,...
€70.00 *
CB11699
CNC milled, black handlebar racer for the Bobber, Bobber Black, Speedmaster & Bonneville. Are there in the heights 60mm (measured to the middle of the handlebar). For a comfortable sitting position, the risers are slightly tilted towards...
€159.00 *
CB11422
M handlebar 1 CHROM for Bonnie or Thruxton EFI, Made in Germany by Fehling, it is not classic, it is 694 mm wide, it fits with TUEV certificate.
From €76.90 *
CB00206
LSL Lenkungsdämpfer für Thruxton 1200 und R. Passt auch an der StreetTwin und Cup (bei diesen beiden Modellen muss allerdings der Lampenhalter leicht ausgeklinkt werden, damit die Hallteschelle im das Standrohr passt). Für diese beiden...
€279.00 *
CB11381
40mm long brake line extension for the Triumph Steet Twin models. With ABE. With this extension you have the possibility to mount a wider handlebar, e.g. the Fat Bar handlebar (see accessories in this description).
€14.95 *
CB11750
LSL Superbike handlebars Fatbar Flat for crown 127T071. Measurements: 740x150x60
€89.95 *
CB11050
Real leather bag for mounting on cross handlebars or a handlebar cross brace. Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your...
€99.95 *
CB11883
Original Triumph hand protector kit for the Scrambler 1200 XC. On the XE version the protectors are fitted as standard. If you want to protect the levers of your XC in case of a fall or your hands from bushes during small off-road rides,...
€159.00 *
CB11827
LSL handlebar weights chrome or black for 1 , 22mm steel handlebar pair. Internal thread at the original socket must be removed or bored.
€24.95 *
CB00187.2
LSL handlebar weights chrome or black for 1", 22mm and FatBar (all R9T models) Alu handlebar pair. The internal thread of the original handlebar must be removed or drilled out.
€24.95 *
CB10924
When installing a new handlebar or stub on all Triumph models with standard 22mm or FatBar (inside thick outside 22mm) handlebars, it is necessary to make two holes in the new handlebars. Over it the original fittings are then locked....
€29.95 *
CB11954
The name "Ape Hanger" is the name of the game and I think everything about the handlebars. One loves it, the other hates it. The handlebars give the Bobber or Speedmaster a completely different look (see photo). Also the driving feeling...
€133.00 *
CB11544
Superbike handlebar kit suitable for Thruxton 1200 (not for R). Through the kit, the thruxton becomes more comfortable from the seat position, and the motorcycle becomes harsher and you simply have more power over the motorcycle. The kit...
From €538.00 *
CB10940.1
Handlebar riser FatBar StreetTwin, Cup & Scrambler +5 mm silver. Suitable for FatBar handlebars. These risers are needed to mount the beautiful FatBar handlebars on the Street models. Fat Bar handlebars are 28.6 mm thick in the middle...
€99.95 *
CB10889
Handlebar riser StreetTwin Cup & Scrambler CNC milled. The risers are straight and not cranked towards the rider like the original ones.
€99.95 *
CB10888
Linkerriser T120 5 mm höher & 10 mm nach vorn. Silber. Sorgt für eine deutlich angenehmere Sitzposition. Im aktuellen Teilegutachten noch nicht gelistet, Aktualisierung ist in Vorbereitung! Daher Eintragung nach § 19.2 notwendig
€99.95 *
CB10890
A pair of handlebar ends made of turned aluminum.
€38.00 *
CB10811
CNC milled handlebar bone for the classic look. For T120, Bobber & SpeedMaster the bone is only available in black (therefore not available in silver) The Street models come with new (black) handlebar risers (lower clamp).
From €70.00 *
CB10781.1
Old School Bar Wide Bar for Rizoma Drag Bar Handlebar Rizoma Fat Bar Fat Bar Alu Handlebar Riser Lenkungsdämpfer Drilling M Handlebar 1 Handlebar ends Steering head Handlebar Rizoma Taperet Handlebar lift Handlebar Handlebar Riser Superbike Handlebar Handlebar end Rizoma Cap Flat Track Thruxton 1200 Linkerriser Hand Guards Ape Hanger for Sporttourer Triumph Rizoma Scrambler 1200 Superbike Cranked Handlebar black Brake line Beach Bar for Rizoma Retro
Viewed