Motogadget M.Grip Metal Handles
€139.00*
Available, delivery time: 1-3 days
Zubehörartikel
from €99.95*
€129.00*
€99.00*
from €129.00*
€99.00*
€99.00*
€23.90*
| item number: | 4000400 |
| Shop-number: | CB11628 |
Product information "Motogadget M.Grip Metal Handles"
The M.Grip is a universal aluminium handlebar for all common handlebar diameters with 1 inch or 22 mm (7/8 inch) tube diameter.
These grips are perfect in conjunction with the Motogadget handlebar ends mirrors & turn signals, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & turn signals can be found in the accessories of this description).
Aluminium CNC milled.
The clamping of the grip sleeve is concealed from the outside by a screwed inner ring. This clamping on handlebars or throttle grip is done precisely by 6 set screws made of stainless steel.
The block profiling in the hand area creates a very good grip feeling.
Always 2 grip sleeves are delivered as a pair.
If replacement is required, individual grip sleeves can also be supplied on request. If you prefer rubber grips, you will find the same design in the m.grip soft.
Important: If in doubt, please measure the inner part of the throttle grip. This should be less than 29 mm.
Please always order the end caps m.grip cap separately if you want to use the handles without m.blaze disc or cone.
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| Triumph 400er |
Scrambler 400
Speed 400
|
|---|---|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5 - Street Scrambler / Scrambler 900
Scrambler 900 / Street Scrambler EU5 +
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5 - Street Twin / Speed Twin 900
Speed Twin 900 / Street Twin EU5 +
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
0
0
0
0
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Motogadget Handlebar Indicator M.Blaze Disc
CB11132.2M
/ RS600
From
€99.95*
Noble handlebar end turn signals from Motogadget. The housing is CNC machined from aluminum. Because the indicators are so flat and have a clear glass, they are as good as not noticeable. Nestle by the appropriate size very perfectly to most handlebar grips.
Are very visible from the front and are also seen from behind (for behind, however, they are not recognized in the StvO as turn signals). Fit all handlebar sizes accessory handlebars with an Inndendurchmesser of 14mm - 21mm. In most original handlebars fit the turn signals unfortunately not. For BMW R nineT models, however, there are suitable adapters for the original handlebar (see accessory article in this description).
More elegant and cleverly solved you can not install a turn signal for the front. The aluminum housing in conjunction with the clear glass pane is an absolute eye-catcher.To get a particularly clean front, we recommend the Motogadget turn signals in combination with the perfectly matching handlebar end mirrors from Motogadget to combine. Matching adapters for this, in order not to have to move the fittings on the handlebars, are of course also available from Motogadget (everything can be found under the accessories in this description).If you want it to be perfect, you can order the matching handlebar grips (in the same diameter as the turn signals) from Motogadget.
The optical turn signal counterpart for the rear (Motogadget Pin) can be found in the accessories of this description.
For easy installation of the turn signals, we recommend model-specific turn signal plugs, so that nothing has to be cut off the original wiring harness.
Motogadget M.View Sport 130 Mirror
CB11624
/ RS0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget Mo.View Spy 50
CB11626
/ RS0
€99.00*
Motogadget Mo.View Spy handlebar end mirror.
The classic round mirror in a tiny design (we have never had such a small and filigree mirror in our range that you can still see quite well) for 22 mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They work completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly into the metal of the body. The aluminium itself is the mirror surface! This enables a weightless design without a rim or frame and the mirror body itself is extremely thin and light. Glass breakage or glass falling out is simply not possible! A new mirror design that is unrivalled on the market, but will not be found anywhere else! These mirrors really are an absolute highlight on any motorbike!
The mirror can be mounted both upwards and downwards on the handlebars (fits left & right).
Mounting:
You can clamp the mirror directly around the handlebars (simply push the fittings inwards a little).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebars (see accessory article in this description). This extension also provides a perfect handlebar end (our absolute recommendation if no handlebar end indicators are fitted).
There is also an adapter that enables both the handlebar end mirrors and the Motogadget handlebar end indicators to be fitted without having to push the fittings further inwards. In other words, a handlebar extension that still has a mount for the M.Blace disc indicators on the outside. (See Motogadget Disc / Cone Adapter in the accessories section of this description)
The mirror arms are manufactured to the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you fit everything
Dimensions:Diameter of the mirror body: 75 mm Thickness of the mirror body without ball head: 4 mm Length of the mirror arm: 61 mm Diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 8 mm
The size of the mirror surface of the m.view spy does not comply with the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Mo. Switch Mini Taster
CB12259M
/ RS600
From
€129.00*
The aluminum mini button units from Motogadget are probably the smallest and most delicate armature buttons currently available on the motorcycle market.
The button housing has 3 buttons that can be individually assigned and serve to remove the unsightly & large plastic switch units on your Triumph. The button rings from Motgadget can also be mounted so that two rings are directly next to each other (see photos). Particularly recommended to the button housings are also the Motogadget handlebar grips, as these have exactly the same diameter and then provide a perfect transition (grips can be found under the accessories in this description).
Button units, however, you can not plug & play simply replace the original switches (because these have partly also switches and not only buttons).To mount such a button, an additional electronic box must be installed in the motorcycle. We offer 2 different boxes (both you can find under the accessories in this description). Please read the description of the boxes in detail to assess whether your technical know how allows the installation or not.
Motogadget Mo.Club 130
CB11623
/ RS0
€99.00*
Motogadget mo.view Club 130 handlebar end mirrors in a sporty classic oval design (road legal) for 22 mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They work completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly into the metal of the body. The aluminium itself is the mirror surface! This enables a weightless design without a rim or frame, and the mirror body itself is extremely thin and light. Glass breakage or glass falling out is simply not possible! A new mirror design that is unrivalled on the market, but will not be found anywhere else! These mirrors really are an absolute highlight on any motorbike!
The mirror can be mounted both upwards and downwards on the handlebars (fits left & right).
Mounting:
You can clamp the mirror directly around the handlebars (simply push the fittings inwards a little).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebars (see accessory article in this description). This extension also provides a perfect handlebar end (our absolute recommendation if no handlebar end indicators are fitted).
There is also an adapter that allows both the handlebar end mirrors and the Motogadget handlebar end indicators to be fitted without having to push the fittings further inwards. In other words, a handlebar extension that still has a mount for the M.Blace disc indicators on the outside. (See Motogadget Disc / Cone Adapter in the accessories section of this description)
The mirror arms are manufactured to the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you mount everything
Dimensions:Width of the mirror body: 114 mm Height of the mirror body: 80 mm Thickness of the mirror body without ball head: 4.5 mm Length of the mirror arm: 110 mm Diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 12 mm
The size of the mirror surface of the m.view flight complies with the StVZO and it has ECE labelling. This makes it suitable for any motorbike without registration. Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625
/ RS0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
1" Throttle grip sleeve Triumph LC
CB11648
/ RS601
€23.90*
This throttle grip sleeve is needed if you want to use other grip rubbers on a Bonneville T120 (or T100, Bobber, Bobber Black or Speedmaster with grip heating).