Handlebar stay Crossbar
€24.95*
Available, delivery time: 1-3 days
Zubehörartikel
from €89.95*
from €89.95*
from €89.95*
from €89.95*
| item number: | 122ST01MB |
| Shop-number: | CB12606 |
Product information "Handlebar stay Crossbar"
Aluminum handlebar brace, suitable for some LSL Fat Bar handlebars from our range.
The brace gives your motorcycle a classic scrambler / offroad look.
Suitable for LSL aluminum handlebars: 128AX: A00 / A01 / A02 / A03 / A04 (all matching handlebars can be found under accessories in this product description).
| BMW R nineT |
R nineT /5
R nineT Classic / Roadster EU 3
R nineT Classic / Roadster EU 4
R nineT Classic / Roadster EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12 Cruiser
R12 G/S
R12 S
R12 nineT
|
| Triumph 400er |
Scrambler 400 X
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
601
601
601
601
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Nakedbike Handlebar 790mm
CB11509M
/ RS2
€89.95*
The Naked Bar lies between the original handlebar and the CrossBar a little bit flatter than the original one & slightly wider (790mm) than the original one (original width is 780mm). However, the handlebar does not rise as steeply to the ends as the original one. This makes for a better line (because the handlebars look nice and straight) and also for a better riding feeling.In our opinion, this is the best handlebar for the R9T for a good driving experience. The handlebar comes closest to the well known Roadster handlebar which we use a lot for the Triumph models.The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily replaced. The original handlebar end caps don't fit anymore (here we would recommend to use the Rizoma handlebar end weights or to convert to handlebar end indicators like on the motorcycle in the pictures / see accessories article in this description).Both in black and in silver, the handlebar has a beautiful matt pearl blasted surface.
In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.
Adventure handlebars - 805mm
CB12456M
/ RS1
€89.95*
The Adventure handlebars are just the thing for anyone who wants a handlebar that looks really cool but is still comfortable and attractive to ride. Visually, the handlebars are very similar to the Cross Bar or Magura handlebars. The small but subtle difference lies in the offset. This is because the Adventure handlebars are not as straight as the other two handlebars, but are cranked slightly more towards the rider (which gives you a more comfortable riding position). The handlebars are also a little higher. The perfect compromise between looks and functionality.
The handlebars provide a more front-wheel-orientated riding position, giving the rider more control over the front wheel and motorbike.
ATTENTION: This handlebar is a FatBar handlebar. This means it is 28mm in the centre and 22mm on the outside. The handlebars can be installed on all BMW R nineT / R12 nineT motorbikes (no lines or cables need to be changed).On most Triumph motorbikes, the handlebar clamp must be changed to 28mm. On Triumph models with 1" handlebars, the fittings must also be modified. If you have any questions, please contact us.
The handlebars are made of aluminium and are supplied with ABE. All cables and wires are sufficient (i.e. the handlebars can simply be replaced). The original handlebar end caps will no longer fit (here we would recommend using the Rizoma handlebar end weights or converting to handlebar end indicators. See accessories article in this description).
In both black and silver, the handlebars have a beautiful, matt bead-blasted surface.
Dimensions: Width: 805mm / Height: 77mm / Depth: 114mm / Clamping range: 146mm / Grip tube length: 220mm
Cross Bar Handlebar 805mm
CB11508M
/ RS1
€89.95*
The crossbar is slightly flatter, wider and slightly less inclined towards the rider than the original handlebar (the original width of teh R9T handlebar is 780 mm).
The handlebars provide a more front-wheel-oriented riding position, giving the rider more control over the front wheel and the motorcycle. The 25 mm more width also gives the rider more control over the motorcycle, resulting in a more active riding experience. Sitting further forward means sportier, but not more uncomfortable! For many riders, this riding position is even more comfortable than an upright riding position.
The handlebars are made of aluminum and are supplied with ABE. All cables and wires fit, i.e. the handlebars can be easily replaced. The original handlebar end caps no longer fit (we recommend using the Rizoma handlebar end weights or converting to handlebar end indicators - as on the motorcycle in the pictures / see accessories in this description).
The handlebars have a beautiful matt pearlescent finish in both black and silver.
In order to be able to mount the original fittings, 2 small holes must be drilled in the handlebars (these must be exactly opposite each other). We offer a drilling template with which these holes can be drilled quickly and easily. See accessories in this description.
Attention a 28.6mm Fat Bar clamp is required!
Attention, if your motorcycle does not have a Fat Bar handlebar clamp ex works (the handlebar has a diameter of 28mm in the middle and 22mm on the outside), you must also order a Fat Bar handlebar mount. This is the case, for example, with a Street Twin / Speed Twin 900 or the Triumph Scrambler 865.On all BMW R nineT models, Triumph Speed Twin 1200, Street Scrambler / Scrambler 900, the handlebars can simply be replaced with the original handlebars.
Alu Handlebar Fat Bar 760mm BMW R9T
CB11668M
/ RS1
€89.95*
The Fat Bar handlebar is as wide as the original BMW R9T handlebar. However, it is a bit flatter and grader than the original. So you get a more front wheel oriented seating position and optically a flatter line.The Fat Bar is similar to the Cross Bar: same height, a bit narrower and a bit more cranked to the driver.Dimensions: 780mm wide 70mm high 155mm offset.The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description).In black as well as in silver the handlebars have a nice, matt pearl blasted surface.
In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.