Skip to main content Skip to search Skip to main navigation

Motogadget Motoscope Tiny

Product information "Motogadget Motoscope Tiny"

The motoscope tiny is a very small analog speedometer in 49mm format. It measures the speed digitally and displays it precisely via a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of possibilities for installation. Sophisticated technology makes the classic look possible without compromise. The dial does without any display cut-out or LCD and has a convincing classic-style look. The perfect solution for purists and minimalists.

Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).
Also, an additional box is needed to connect the speedometers on many bikes (also found under the accessories).
Model specific descriptions can be found below the general description.

The high quality aluminum housing is turned from solid and its surface is black anodized. The screw ring is also available black anodized or mirror polished.
The case is 100% waterproof and insensitive to vibrations.

The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off.

To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted.
If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored.
The 4 indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.

Triumph LC
  • To mount a Motogadget speedometer on one of the water cooled Triumph Modern Classic models it is mandatory to install the additional speedometer box LC. 
  • You can find this under the accessories in this description.
  • For the Bobber & Speedmaster we offer a Plug & Play bracket for mounting the speedometer on the original triple clamp.
  • For Bonneville - Street Twin / Cup Scrambler - Speed Twin / Scramber 900 we offer a plug & play bracket for mounting the speedometer on the original triple clamp.
  • For all other models you can order the universal bracket as a base.
  • If the speedometer is not recessed in a lamp, the outer cup or the Stremline Cup must be added.

Triumph AC
  • For all models that have a speedometer with LCD display (odometer) from the factory, an additional break-out box is necessary to connect. This box can also be found under the accessories in this description.
  • If your Triumph has a factory speedometer snail, we offer the spacer (this allows you to remove the speedometer snail). See accessories in this description.
  • Among the accessories you will find a plug & play plate for mounting the speedometer to the original triple clamp. There is also a universal sheet metal for fitting.
  • If the speedometer is not recessed in a lamp, the outer cup or the Streamline Cup must be added.

BMW R nine T
  • For mounting on a BMW R nineT is the additional box: Motogadget Mo.Hub BMW R9T needed. 
  • We recommend here but to order the complete kit (see similar articles in this description).

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Speedmaster / America
  • Thruxton 900 EFI
  • Thruxton Vergaser
Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Bonneville T100
  • Bonneville T120
  • Speed Twin - 1200
  • Speedmaster
  • Street Cup
  • Street Scrambler
  • Street Twin
  • Thruxton 1200
  • Thruxton 1200 R
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
Thruxton 1200
Thruxton 1200 R
7
7
7
7

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Breakoutbox CB00216M / RS8
Motogadget. Break-Out Box. For connecting Motogadget instruments to the injection models with electronic speedometer. Tested by us for 2010/11+2012/13/14/15. Please state motorcycle type and chassis number when ordering! It does not need to be soldered, but must be connected consistently according to our enclosed instructions. The CAN bus installed in the Triumph models reacted immediately by refusing to work if the original instrument was no longer connected. This meant that the desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. In addition to information such as speed and rpm, the mo.tri also provides signals for indicator lights: Blinker left/right, tank reserve, fault memory, high beam, neutral, H2O hot, oil pressure. Some indicator lights on instruments with 4 or 5 LEDs have multiple functions. Another big advantage is the almost foolproof installation! The original connector is used and the cables for the instrument and indicator lights are connected to the terminals of the mo.tri using a color scheme. No soldering or searching for cables required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A big time saver and therefore worth hard cash.   PLEASE STATE YEAR OF MANUFACTURE AND CHASSIS NUMBER!

€199.00*
Cup for Motogadget Speedster & Tiney CB00233M / RS109
Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

€39.00*
Motogadget Tiny Bracket Bobber & Speedmaster CB12214 / RS0
Plug & Play speedometer bracket for mounting a Motogadget Tiny / Speedster / Vintage speedometer on a Triumph Bobber or Speedmaster. The scope of delivery includes all screws and sleeves that are needed for mounting. To get a clean finish and a nice look, we recommend to order the Motogadget outer cup (see accessories article in this description).

€39.95*
Spacer CB00269M / RS200
Spacer Front wheel As a replacement for tachometer worms after installation of a digital tachometer

€24.95*
Streamline Cup CB11481M / RS600
The mst Groove Cup allows the installation of all analogue tokens of the series tiny at 22mm and 1 inch handlebars. Elaborately made from the solid turned / milled and black anodized Groove Cup for the series Tiny with stylish contrast milling. The mounting clamp is precisely lasered and bent from aluminum and allows a simple but safe mounting on the handlebar. The finish of the Groove Cup with the sculpted lines fits perfectly with the design of the instruments. Diameter 56 mm, length 60 mm.

€88.99*
Bracket black CB00231M / RS108

€39.90*
Streamline Cup for Chrono Classic CB00237 / RS600
Colour: Polished | Measure: 22mm
The msc Streamline-Cup for 1 inch handlebars is suitable for the assembly of all Classic instruments. Elaborately turned from the solid / milled and highly polished Streamline Cup. Stable attachment with handlebar clamp to 1 inch / inch handlebars. A real eye-catcher for every custom bike.

€175.00*
Speedo Box LC CB12215M / RS0
With the Peak Mod Speedo Box LC it is possible to connect all Motogadget speedometers to the water cooled Triumph Modern Classic models (to date the boxes are not yet available for all Euro 5 models. But some are already available. To be on the safe side, you can ask us for the availability for your bike before ordering). We have the box selbest already installed on some motorcycles and it works really well. The assembly and wiring are really well described and understandable. Assembly instructions and cable assignment diagram can also be found as a download under the downloads in this description. So you can get an idea of the effort in advance. The speedometer box we recommend to mount under the tank of the motorcycles, there is enough space and all cables are very easy to lay.The box is available as a single & dual version. Single: For all models that have only one speedometer installed from the factory. Dual: For all models that have factory installed a speedometer & tachometer.Please specify your motorcycle model + year in the comment field (on the last page in the ordering process) when ordering. For Triumph Bobber & Speedmaster we also offer a mounting plate, with which you can mount a Motogadget Tiny - Speedster - Vintage speedometer on the triple clamp (see accessory article in this description).For all other models you have to build a plate yourself.  Note on the grip heater: If the speedometer box is installed, the original grip heater no longer works (another module is required for this). We sell the box in 2 versions:1. as a bundle at a discounted price of 100€ (this price is only granted if a Motogadget speedometer instrument is also ordered from us).2. single only the box. Models  available :     VIS-T Single  Street twin 2016-2018 Street twin 2019-2020 Street twin 2021-2024 EURO-5 / Speed twin 900 2024 Street scrambler 2016-2018 Street scrambler 2019-2020 Street scrambler 2021-2024 / Scrambler 900 2024 Bobber 2016-2020 Bobber 2017-2020  Bobber 2021-2024 EURO-5   VIS-T Dual T100 2016-2020 T100 2021-2024 EURO-5 T120 2016-2020 T120 2021-2024 EURO-5  Thruxton 1200 Thruxton R EURO-4 Thruxton RS Speed Twin 1200 2019-2021 EURO-4 Speed Twin 1200 2021-2024 EURO 5 Street cup 2016-2018   *NOT SUPPORT LIST. All Speed master. Bobber TFC

€495.00*
Motogadget holding plate for Chrono Classic, Tiny & Speedster CB10737M / RS152
Fits for Triumph Bonneville, Scrambler & Thruxton. (Does not fit for Scrambler who are before BJ 2010. The holder is suitable for the big chrono and the little Tiny as well as the Speedster black

€39.95*