Sprocket Locking plate LC
€24.50*
Available, delivery time: 1-3 days
Zubehörartikel
€99.95*
€119.95*
from €17.95*
from €114.95*
from €134.95*
€20.96*
| item number: | T1186601 |
| Shop-number: | CB11889 |
Product information "Sprocket Locking plate LC"
Original Triumph lock washer for the chain sprocket of all water cooled Triumph Modern Classic models.
The plate should be replaced when replacing the sprocket for safety reasons.
| Triumph LC models from 2016: |
|
|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
|---|
0
0
0
0
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Chain kit 900cc engine - steel
CB11452M
/ RS-1
€99.95*
Complete chain set for all water-cooled Triumph Modern Classic models with 900cc engines (520 chain) - steel chain
See table below for standard motorbike gear ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 520 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This gives the bike a much more powerful bottom end, but still doesn't sacrifice top speed.
About the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 900cc engine - Gold
CB12877
/ RS-1
€119.95*
Complete chain set for all water-cooled Triumph Modern Classic models with 900cc engines (520 chain) - Golden chain
See table below for standard motorbike gear ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 520 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This gives the bike a much more powerful bottom end, but still doesn't sacrifice top speed.
About the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Front sprocket 1200ccm
CB11762M
/ RS600
€17.95*
Front chain sprocket with 16 or 17 teeth (please select). The original 1200ccm engines have 17 sprockets (except the Thruxton 1200 which has 16 teeth ex works).For those who want to gear their bike a bit shorter (highly recommended) we recommend a larger black chainring.
Chain kit 1200cc engine - steel
CB11449M
/ RS-1
€114.95*
Complete chain set for all water-cooled Triumph models with 1200cc engines (525 chain) - steel colours.
See table below for standard motorbike ratios.Please note that not all gear ratios are possible or make sense. See special model descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 525 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R - RS / Speed Twin
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Scrambler 1200 XC / XE
44 teeth
16 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This gives the bike a much more powerful bottom end, but still does not lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention: If you have installed a side licence plate holder (e.g. the Wunderkind from our range), you will need a longer chain. If you choose a 42 mm chainring, you also need a longer chain.An even longer chain is required when using a side licence plate holder in conjunction with a 42 tooth chainring(therefore please select the appropriate model).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This makes the bike push harder at the bottom, but still doesn't lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain for the chain kit, you must select the correct model in the selection above. You can see how to check/determine which swingarm your Bonneville has in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models have a pretty suitable gear ratio ex works. However, if you want to go even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go for a 40 tooth chainring and / or a 17 tooth sprocket.
Scrambler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable gear ratio ex works. But if you want it even shorter, for even more punch off-road, we recommend the 46 tooth chainring. For a slightly longer ratio, we would go for a 42 tooth chainring and / or a 17 tooth sprocket.
About the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 1200cc engine - steel copy
CB12876
/ RS-1
€134.95*
Complete chain set for all water-cooled Triumph models with 1200cc engines (525 chain) - steel colours.
See table below for standard motorbike ratios.Please note that not all gear ratios are possible or make sense. See special model descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 525 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R - RS / Speed Twin
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Scrambler 1200 XC / XE
44 teeth
16 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, so we recommend using a larger 40 or 42 chainring to shorten the gear ratio of the bike. This gives the bike a much more powerful bottom end, but still does not lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention: If you have fitted a side licence plate holder (e.g. the Wunderkind from our range), you will need a longer chain. If you choose a 42 mm chainring, you also need a longer chain.An even longer chain is required when using a side licence plate holder in conjunction with a 42 tooth chainring(therefore please select the appropriate model).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This makes the bike push harder at the bottom, but still doesn't lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain for the chain kit, you must select the correct model in the selection above. You can see how to check/determine which swingarm your Bonneville has in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models have a pretty suitable gear ratio ex works. However, if you want to go even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go for a 40 tooth chainring and / or a 17 tooth sprocket.
Scrambler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable gear ratio ex works. But if you want it even shorter, for even more punch off-road, we recommend the 46 tooth chainring. For a slightly longer ratio, we would go for a 42 tooth chainring and / or a 17 tooth sprocket.
About the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Front Chain Spocket 900ccm Engine
CB11761
/ RS600
€20.96*
Front chain sprocket. 17 teeth as replacement for the original RItzel. Original is also a 17er sprocket used.If you want to have the bike translated a bit shorter, we recommend to order a bigger chainring. See chain kit in the accessories of this description.