OBD Bluetooth Dongel
€59.00*
Available, delivery time: 1-3 days
Zubehörartikel
€164.95*
€119.95*
from €114.95*
from €134.95*
€99.95*
€119.95*
from €129.95*
from €169.95*
| item number: | 211257703 |
| Shop-number: | CB12507 |
Product information "OBD Bluetooth Dongel"
This Bluetooth adapter plugs into the OBD connector (under the seat) of your water-cooled Triumph and allows you to connect to the motorbike via Bluetooth.
This makes it possible for you to install our tuning maps.
It also allows you to change the gear ratio on Euro 5 vehicles.
Requirements:
- A mobile phone or tablet with Android operating system
- Tune ECU software in the standard version (costs: 25€) https://tuneecu.net/android.html
| Triumph 400er |
Scrambler 400
Speed 400
|
|---|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5 - Street Scrambler / Scrambler 900
Scrambler 900 / Street Scrambler EU5 +
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5 - Street Twin / Speed Twin 900
Speed Twin 900 / Street Twin EU5 +
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
600
600
600
600
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
BlackLine chain kit 900cc engine
CB12315
/ RS-1
€164.95*
DID BlackLine chain set complete for all models 900cc engines with 520 chain. See table below for standard motorbike ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
DID BlackLine 520 chain set. The black DID chain is just the thing for those who want a nice black and inconspicuous look. Black plates with silver rollers.The chain kit is supplied with a rivet lock.
The kit includes a very high-quality DID chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black colour.
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. As a result, the bike pushes much harder at the bottom, but does not lose any top speed.
About the DID chain:As the successor to the proven ZVM2 high-performance chain, the ZVM-X was developed with a particular focus on the diverse loads that occur in everyday use. The tensile strength only indicates the breaking load of a chain determined statically in the laboratory, but not its resistance to the forces that occur in practice.
For this reason, the ZVM-X focuses primarily on strength in use.
-Increased tensile strength and-lower weight compared to the ZVM2-very high wear resistance and up to 50% reduced friction losses thanks to the patented X-ring technology
Black Scale chain kit 900cc engine
CB12488
/ RS-2
€119.95*
RK Black Scale chain set complete for all models 900cc engines with 520 chain. See table below for standard motorbike ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
RK Black Scale 520 chain set. Perhaps the most elegant chain available on the motorbike market. Black plates and golden rivets as well as rollers from the premium manufacturer RK Chaines.The chain kit is supplied with a rivet lock.
The kit includes a very high quality RK chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black colour.
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This makes the bike push harder at the bottom, but still doesn't sacrifice top speed.
About the RK chain:RK has been supplying all well-known Japanese motorbike manufacturers as original equipment for more than 40 years.RK is also the first choice of many racing teams in MotoGP, motocross and the Paris-Dakar Rally.The Black Scale is an improved form of the O-ring chains. The special shape of the X-rings seals the chain at four sealing points, preventing the lubricant from escaping.The X-ring also serves as an additional lubricant reservoir. The service life of the chain is extended by around 30 %.
Chain kit 1200cc engine - steel
CB11449M
/ RS-1
€114.95*
Complete chain set for all water-cooled Triumph models with 1200cc engines (525 chain) - steel colours.
See table below for standard motorbike ratios.Please note that not all gear ratios are possible or make sense. See special model descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 525 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R - RS / Speed Twin
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Scrambler 1200 XC / XE
44 teeth
16 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This gives the bike a much more powerful bottom end, but still does not lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention: If you have installed a side licence plate holder (e.g. the Wunderkind from our range), you will need a longer chain. If you choose a 42 mm chainring, you also need a longer chain.An even longer chain is required when using a side licence plate holder in conjunction with a 42 tooth chainring(therefore please select the appropriate model).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This makes the bike push harder at the bottom, but still doesn't lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain for the chain kit, you must select the correct model in the selection above. You can see how to check/determine which swingarm your Bonneville has in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models have a pretty suitable gear ratio ex works. However, if you want to go even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go for a 40 tooth chainring and / or a 17 tooth sprocket.
Scrambler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable gear ratio ex works. But if you want it even shorter, for even more punch off-road, we recommend the 46 tooth chainring. For a slightly longer ratio, we would go for a 42 tooth chainring and / or a 17 tooth sprocket.
About the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 1200cc engine - steel copy
CB12876
/ RS-1
€134.95*
Complete chain set for all water-cooled Triumph models with 1200cc engines (525 chain) - steel colours.
See table below for standard motorbike ratios.Please note that not all gear ratios are possible or make sense. See special model descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 525 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R - RS / Speed Twin
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Scrambler 1200 XC / XE
44 teeth
16 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, so we recommend using a larger 40 or 42 chainring to shorten the gear ratio of the bike. This gives the bike a much more powerful bottom end, but still does not lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention: If you have fitted a side licence plate holder (e.g. the Wunderkind from our range), you will need a longer chain. If you choose a 42 mm chainring, you also need a longer chain.An even longer chain is required when using a side licence plate holder in conjunction with a 42 tooth chainring(therefore please select the appropriate model).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This makes the bike push harder at the bottom, but still doesn't lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain for the chain kit, you must select the correct model in the selection above. You can see how to check/determine which swingarm your Bonneville has in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models have a pretty suitable gear ratio ex works. However, if you want to go even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go for a 40 tooth chainring and / or a 17 tooth sprocket.
Scrambler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable gear ratio ex works. But if you want it even shorter, for even more punch off-road, we recommend the 46 tooth chainring. For a slightly longer ratio, we would go for a 42 tooth chainring and / or a 17 tooth sprocket.
About the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 900cc engine - steel
CB11452M
/ RS-1
€99.95*
Complete chain set for all water-cooled Triumph Modern Classic models with 900cc engines (520 chain) - steel chain
See table below for standard motorbike gear ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 520 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This gives the bike a much more powerful bottom end, but still doesn't sacrifice top speed.
About the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 900cc engine - Gold
CB12877
/ RS-1
€119.95*
Complete chain set for all water-cooled Triumph Modern Classic models with 900cc engines (520 chain) - Golden chain
See table below for standard motorbike gear ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 520 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This gives the bike a much more powerful bottom end, but still doesn't sacrifice top speed.
About the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Black Scale Chain kit 1200ccm engine
CB12314M
/ RS-2
€129.95*
RK Black Scale chain set complete for all models 1200cc engines with 525 chain. Series ratio of the motorcycles see table below.Attention not all gear ratios are possible or make sense. See model specific descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU program (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
RK Black Scale 525 chain set. Perhaps the most elegant chain available on the motorcycle market. Black link plates and gold rivets and rollers from the premium manufacturer RK Chaines.The chain kit comes with a rivet lock.
The kit includes a very high quality RK chain, a chainring (choice of a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A bit further down in the description, you have to pack your desire gears to the set.In addition, a rivet lock is included.
Tip:- We recommend for safety even a new sprocket lock plate with the chain set to order (see accessories article in this description).- In addition, you will find in the accessories still beautiful, black chainring nuts for all who want to have it completely black.
Serial translation
model
chainring
pinion
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, we therefore recommend to take larger 40er or 42er chainring to translate the motorcycle so something shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed and the konztant jerking at low speeds is somewhat smoother.A larger chainring than the 42 teeth is not provided in this kit for the Bobber. Who would still like to have this, which can contact us, then we put together an individual kit.Attention:Si vous avez monté un support de plaque latéral (par exemple le Wunderkind de notre gamme), vous avez besoin d'une chaîne plus longue.
Celui qui choisit un plateau de 42 dents a également besoin d'une chaîne plus longue.Une chaîne encore plus longue est nécessaire en cas d'utilisation d'un support de plaque latéral en combinaison avec un plateau de 42 dents.(veuillez donc choisir le modèle approprié dans la liste des modèles).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, we therefore recommend to take larger 40 or 42 chainring to translate the bike with it a little shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed and the konztant jerking at low speeds is somewhat smoother.A larger chainring than the 42 teeth is not provided in this kit for the Bobber. Who would still like to have this, which can gladly contact us, then we put together an individual kit for him.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain to the chain kit, you have to choose the right model in the selection above. How you can check/determine which swingarm your Bonneville has, you can see in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models from the factory have a fairly appropriate gear ratio. But if you want it even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go to a 40 tooth chainring and / or a 17 tooth RItzel.
Scrabmler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable ratio from the factory. Who wants to have it but even shorter, for nch more punch in the field, we recommend the 46 teeth chainring. For a slightly longer ratio, we would go to a 42 teeth chainring and / or a 17 teeth RItzel.
To the RK chain:For more than 40 years, RK has supplied all well-known Japanese motorcycle manufacturers with original equipment.Also in racing, RK is the first choice of many teams in MotoGP, motocross or even at the Paris-Dakar Rally.The Black Scale is an improved form of the O-ring chains. Due to the special shape of the X-rings, the chain is sealed at four sealing points, the lubricant can not escape.In addition, the X-ring serves as an additional lubricant reservoir. The service life of the chain is extended by about 30%.
Black Line Chain kit 1200ccm engine
CB12487M
/ RS-1
€169.95*
DID ZVMX BlackLine chain set complete for all models 1200cc engines with 525 chain. Series ratio of the motorcycles see table below.Attention not all gear ratios are possible or make sense. See model specific descriptions below.
ATTENTION Euro 5 models: For Euro 5 vehicles, the ECU must be reprogrammed when the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Veuillez vérifier au préalable dans le programme Tune ECU s'il est possible de régler le rapport souhaité (tous les rapports ne sont pas possibles pour tous les modèles).
DID BlackLine chain set 525 chain set. If you want it to be nice and black and inconspicuous, the black DID chain is just right for you. Black plates with silver rollers.The chain kit comes with a rivet lock.
The kit includes a very high quality DID chain, a chainring (choice of a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A bit further down in the description, you have to pack your desire gears to the set.In addition, a rivet lock is included.
Tip:- We recommend for safety even a new sprocket lock plate with the chain set to order (see accessories article in this description).- In addition, you will find in the accessories still beautiful, black chainring nuts for all who want to have it completely black.
Serial translation
model
chainring
pinion
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, we therefore recommend to take larger 40er or 42er chainring to translate the motorcycle so something shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed and the konztant jerking at low speeds is somewhat smoother.A larger chainring than the 42 teeth is not provided in this kit for the Bobber. Who would still like to have this, which can contact us, then we put together an individual kit.Attention:
If you have installed a side number plate carrier (e.g. the Wunderkind from our range), you need a longer chain. If you choose a 42 chainring, you also need a longer chain.An even longer chain is needed when using a side number plate holder in combination with a 42 tooth chainring.(therefore please select the appropriate model in the model selection).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, we therefore recommend to take larger 40 or 42 chainring to translate the bike with it a little shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed and the konztant jerking at low speeds is somewhat smoother.A larger chainring than the 42 teeth is not provided in this kit for the Bobber. Who would still like to have this, which can gladly contact us, then we put together an individual kit for him.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain to the chain kit, you have to choose the right model in the selection above. How you can check/determine which swingarm your Bonneville has, you can see in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models from the factory have a fairly appropriate gear ratio. But if you want it even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go to a 40 tooth chainring and / or a 17 tooth RItzel.
Scrabmler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable ratio from the factory. Who wants to have it but even shorter, for nch more punch in the field, we recommend the 46 teeth chainring. For a slightly longer ratio, we would go to a 42 teeth chainring and / or a 17 teeth RItzel.
To the RK chain:
As the successor to the proven high-performance chain ZVM2, special attention was paid during the development of the ZVM-X to the diverse loads that occur in everyday life. The tensile strength only indicates the breaking load of a chain determined statically in the laboratory, but not the resistance to the forces that occur in practice.For this reason, the ZVM-X focuses primarily on strength in use.
-increased tensile strength and-lower weight compared to the ZVM2-very high wear resistance and up to 50% reduced friction losses due to the patented X-ring technology.
Power Kit Stage 1 - Speed Twin +18 HP
CB12539
/ RS0
€499.00*
Product information "PowerKit Speed Twin EU5 Stage 1".
Powerkit Speed Twin EU5 Stage 1. Consists of:
BMC - Sport air filter
Raisch air filter cover (with larger air intake)
USB stick with RAISCH special mapping for direct mapping to the ECU
The peak power increases by 13 HP and the maximum torque by 9 NM.Vmax speed limit of 213 km/h is lifted by our mapping.
At 5500 rpm you even get a plus of 13 HP and 17 NM. As you can see from the power curves, the entire, usable rpm range becomes significantly stronger! Also the upper speed range becomes significantly more biting. Here one gains even to the series at 7800 rpm + 18 HP (See performance diagram). The data in the diagrams are rear wheel measurements, see general description in the product group. Our mappings were determined elaborately with a lot of time on the test bench.
These mappings can be played on the vehicle itself via app + Bluetooth OBD adapter (more info see below), so that a plug & play solution results. This saves you having to perform your own tuning on third-party dynos, which are also very expensive. In addition to the increase in power, the result is a more harmonious and finer engine running, as well as a better throttle response. We increase the rev limit by 400 rpm, which is in the absolutely healthy range. This kit is of course without road approval and only suitable for racetrack use. The installation is relatively easy to do yourself.
When ordering, the complete chassis number must be specified in the comment field of the ordering process!
Installation and Mapping aufspielen with us in the house after appointment without problems against surcharge possible.
Info: If you want to get an overview about the requirements and the mapping of the ECU, you have to click on the file "Notes on ECU Tuning" under Download (below the product description).
A suitable Bluetooth OBD adapter can be found under accessories below this description.
Sprocket 1200ccm
CB11187M
/ RS1
€34.95*
Chainring for 1200ccm engines with 525 chains 44, 42, 40 or 37 teeth.
ATTENTION: For Euro 5 vehicles, the ECU must be reprogrammed if the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
The original motorcycles have shorter gear ratios: Bonneville T120 37 teeth / Bobber 37 teeth (much too long gear ratio) / Thruxton 1200 & Speed Twin 42 teeth Motorcycle runs much better with the shorter gear ratio over the complete rev range (maximum speed is also not lost). And just below the bike it pushes again differently.In addition, the chainring is black and looks even better.An absolute recommendation from us!Attention at Bonneville T120: Triumph has changed the swingarm length of some models (Thruxton & Speed Twin NOT affected) over the years (new models have longer swingarms).Who has a longer swingarm can only use the 42 chainring in combination with a longer chain (this can be ordered from us on request). As an alternative to the 42er chainring you can also use a 16er sprocket 40er chainring, which results in almost the same transmission ratio as the 42er chainring.You can simply measure if you have installed the long or short swingarm on your motorcycle (see the product photos).Attention at Bobber & Speedmaster: If a side plate holder is installed on the motorcycle (e.g. from our program), then the original chain is only sufficient for the 40er chainring. If you still want the 42 chainring, you have to buy a longer chain from us. Is available on request.
Sprocket 900ccm
CB11451M
/ RS1
€34.95*
Chainring for Bonneville T100 StreetTwin, StreetCup & Street Scrambler 41 & 44 Teeth . For 900cc engines with 520er chain.
ATTENTION: For Euro 5 vehicles, the ECU must be reprogrammed if the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Original have the bikes: a 41er chainring outside, which is clearly too long. With the conversion to a 44er chainring, the motorcycles have noticeably more pressure from below. The bike runs much better with the shorter gear ratio over the entire engine speed range (maximum speed is not lost).
In addition, the chainring is black and looks even better.
An absolute recommendation from us!
Sprocket Dual 1200cc engines
CB11567M
/ RS1
€63.95*
Dual sprocket with 42 teeth for all water-cooled Triumphs with 1200 cc engine.
ATTENTION: For Euro 5 vehicles, the ECU must be reprogrammed if the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).
Standard gear ratio
Modell
Kettenblatt
Ritzel
Bonneville T120
37 Zähne
17 Zähne
Thruxton 1200
42 Zähne
16 Zähne
Thruxton 1200 R - RS / Speed Twin
42 Zähne
16 Zähne
Speed Twin
42 Zähne
16 Zähne
Bobber
37 Zähne
17 Zähne
Bobber Black 16"
37 Zähne
17 Zähne
Speedmaster 1200
37 Zähne
17 Zähne
Scrambler 1200 XC / XE
44 Zähne
16Zähne
Translation tips:
Models with 37 teeth: This gear ratio is clearly too short! With a shorter one, the acceleration, traction and top speed are increased. In addition, the motorcycle rides at 50-60 (city speed) much more relaxed, because the constant Fahrruckeln is significantly less.
Models with 42 teeth: This gear ratio is well chosen ex works. Who would like to have it still somewhat sportier, which can make itself the 44er on it.
Models with 44 teeth: Is an already quite sporty chosen, short transmission. Who wants to have it a little more suitable for long distances, we recommend the 42er chainring to install.
The dual sprockets are the highest quality and technically advanced sprockets in the world. The secret is based on the combination of the durability of steel and the lightness of aluminum. The outer rim of the sprocket is made of steel (to ensure long life), the inner one of aluminum (to save weight).The central parts are manufactured with high precision on CNC mills and are coated with a thick anodized film that prevents oxidation. Based on experience, Stealth sprockets last about three times longer than pure aluminum sprockets.
The steel sprockets for our Twins are at least 20% heavier than the Stealth chainrings (especially with rotating masses, every gram falls into the weight!).
In addition, there is the unique optics.