Motogadget Chrono Classic 2 speedometer for Triumph & BMW We provide you with everything you need to install and connect the Motogadget Chronoclassic 2 speedometer to your Triumph Modern Classic motorbike.Model-specific descriptions and necessary accessories can be found below in the description. The Chronoclassic 2 speedometer is a further development of the German motorbike accessories manufacturer Motogadget, which has been developed with more than 20 years of experience.Classically elegant design paired with very high-quality materials and absolute high-end workmanship.The elegant Chronoclassic 2 speedometer is probably the highest quality motorbike speedometer available on the market. The speedometer has a complete metal housing and is manufactured entirely by Motogadget in Germany.The classic round design (80mm diameter) paired with the flat housing (20mm depth) give the speedometer the perfect overall appearance and allow you to integrate it perfectly into your custom bike. When switched off, a closed, black dial ensures the perfect look: modern, minimalist and timelessly classic at the same time. The digital display, a motogadget in-house development, consists of a matrix of 512 tiny, super-bright red LEDs and shines through the dial. Perfectly readable in direct sunlight, the display has two lines. The top line shows the gear and speed and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlighting and automatic brightness adjustment of the matrix LEDs ensure optimum readability even in dark surroundings.The 11 indicator lights and the LED display are invisible when switched off. Model-specific descriptions: Triumph AC - Air-cooled models up to model year 2015 For all models that have a factory fitted speedometer with LCD display (kilometre counter), an additional break-out box and break-out box A are required for connection. These boxes can both be found under accessories in this description. If your Triumph has a speedo worm from the factory, we offer the spacer (this allows you to remove the speedo worm). See accessories in this description. Under accessories you will find a universal mounting plate to mount the speedo. If the speedometer is not recessed in a lamp, we recommend ordering the outer cup as well. Triumph LC - water-cooled models from 2016 onwards To mount the Chronoclassic 2 speedometer on one of the water-cooled Triumph Modern Classic models, it is absolutely necessary to install the additional speedometer box LC and the breakout box A as well.These can be found under accessories in this description. Among the accessories you will find a universal mounting plate to mount the speedo. If the speedometer is not recessed in a lamp, we recommend ordering the outer cup as well.

The Chronoclassic speedo from motogadget is an analog speedometer with many digital additional functions in a classic round case. Classicbike-Raisch offers some special mounting plates and materials for motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the tachometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. Another special feature is the dark LC display on the DarkEdition. It gives the instrument an even more harmonious appearance.However, we expressly point out that the readability is reduced in direct sunlight. If you value the best possible readability, please go for the green standard display.The technically identical instrument is also available with a white dial (see motoscope classic speedo) or as an analog tachometer (see analog DZM series CLASSIC).

Motoscope mst speedster The mst speedster is a small analog speedometer in an attractive retro design. Technically the instrument is identical to the motoscope tiny. The dial is based on the streamline design of the forties and fifties. Matching to this, it is kept in a warmer white. The shape of the hand matches the dial and is made of brushed stainless steel, and the screw ring is also available here polished or black anodized. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the speedometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. All other features and technical data of the instrument correspond to the motoscope tiny.The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in use and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The four indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays of the LED display. These LEDs can display all the things that the original speedometer also displays.The default indication on the display is the time. If required, a short press of the button will display the values for total kilometers, trip kilometers, on-board voltage, etc. All functions, such as resetting the trip odometer or similar, are easy to operate via the pushbutton. Presettings or stored values remain saved even without power supply.

Motoscope mst Vinatge. It will never be more classic. Screw ring and hands made of solid brass. The handmade, used look is slightly different on each instrument and makes it unique. "Genuine Manufacture Quality Made in Germany". Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).In addition, an additional box is needed to connect the speedometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. Technically the instrument is identical to the motoscope tiny. The dial is based on the streamline design of the forties and fifties. Matching to this, it is kept in a warmer white. The shape of the hand matches the dial and is made of brushed stainless steel, and the screw ring is also available here in a polished or black anodized finish. All other features and technical data of the instrument correspond to the motoscope tiny. The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The four indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays of the LED display. These LEDs can display all the things that the original speedometer also displays.The default indication on the display is the time. If required, a short press of the button will display the values for total kilometers, trip kilometers, on-board voltage, etc. All functions, such as resetting the trip kilometers or similar, are easy to operate via the pushbutton. Presettings or stored values remain saved even without power supply. Translated with www.DeepL.com/Translator (free version)

The motoscope tiny is a very small analog speedometer in 49mm format. It measures the speed digitally and displays it precisely via a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of possibilities for installation. Sophisticated technology makes the classic look possible without compromise. The dial does without any display cut-out or LCD and has a convincing classic-style look. The perfect solution for purists and minimalists. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the speedometers on many bikes (also found under the accessories).Model specific descriptions can be found below the general description. The high quality aluminum housing is turned from solid and its surface is black anodized. The screw ring is also available black anodized or mirror polished. The case is 100% waterproof and insensitive to vibrations. The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The 4 indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.

Motogadget Motoscope mini black. It couldn't be any smaller. With integrated rev counter. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under accessories in this description).In addition, an additional box is required to connect the speedometers on many motorbikes (also found under accessories).Model-specific descriptions can be found below the general description. The motoscope mini is an extremely small, digital motorbike instrument. The specially developed LED display is unique in the instrument sector. 251 ultra-bright LEDs form an almost borderless display surface with excellent readability, which can be used in its entirety to show the display values. This innovative, sophisticated technology is the only way to maximise the display area while minimising the dimensions of the housing. With its very simple, elegant design and high-quality appearance, the motoscope mini fits almost any two, three or four-wheeler. It can support the styling in a prominent position, but can also be integrated inconspicuously and 'cleanly' - the mini makes it all possible! The innovative dot matrix of 251 ultra-bright LEDs displays the engine speed in a scalable, horizontal light strip and all other functions as easily recognisable numerical values. The speed can also be called up as a numerical value at the touch of a button. The brightness of the LEDs is automatically adjusted to optimise readability in darkness, sunlight and twilight. A speed value can be entered for the limit range of the permissible speed ('red range') or as a switching flash function, above which all LEDs light up simultaneously with a pulsating light.The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. The instrument can therefore also be mounted upright! You can switch between the displays using the menu button supplied or, for example, the flashlight button on the handlebars. The standard indication on the display is the speed value. If required, the other measured values can be shown on the display by briefly pressing a button. Optionally, the display can be set to automatically return to the speed value after a short time or a specific display can be permanently set.Default settings or saved values are of course also saved without a power supply.

Motogadget. Break-Out Box. For connecting Motogadget instruments to the injection models with electronic speedometer. Tested by us for 2010/11+2012/13/14/15. Please state motorcycle type and chassis number when ordering! It does not need to be soldered, but must be connected consistently according to our enclosed instructions. The CAN bus installed in the Triumph models reacted immediately by refusing to work if the original instrument was no longer connected. This meant that the desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. In addition to information such as speed and rpm, the mo.tri also provides signals for indicator lights: Blinker left/right, tank reserve, fault memory, high beam, neutral, H2O hot, oil pressure. Some indicator lights on instruments with 4 or 5 LEDs have multiple functions. Another big advantage is the almost foolproof installation! The original connector is used and the cables for the instrument and indicator lights are connected to the terminals of the mo.tri using a color scheme. No soldering or searching for cables required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A big time saver and therefore worth hard cash.   PLEASE STATE YEAR OF MANUFACTURE AND CHASSIS NUMBER!

DAYTONA Digital speedometer, VELONA, black or chrome housing, round D. 60 mm, up to 200 km / h, ECE-R10 tested, with holder, white background lighting, speed / volts / kilometer / triple / clock. We supply inclusive holder, sensor cable and control lamp module. Connection is the simplest with the models with mechanical tacho drive, but goes however also with those with electronic tachos. Here, however, the board must be removed from the original speedometer. No ready plug & play solution. It must be measured and soldered.

Daytona speedo speedo speedo knife combination. Quality instruments from Japan. Classic look, fine and small. Fits much better than the too big original pots. We deliver ready to use with instrument plate, indicator light unit and connection cable set for all injection models. with e-tacho.Nothing has to be changed on the original wiring harness. There is also no extra speedo sensor necessary. Everything is only plugged and screwed (only refers to the models with electronic speedometer, for mechanical speedometers the wiring harness has to be changed slightly).Included. Detailed installation instructions. Available with black or polished ring.

Daytona Heritage lamp with Daytona speedo + necessary accessories: indicator lights, speedo holder in the lamp + external switch and sensor cable. The lamp has a nice elongated shape which gives the bike a real old school look. To mount the long headlight you need a longer lamp holder (see accessories in this description). The speedometer can be connected to the carburetor models without any additional accessories. On the EFI injector models an additional module is needed to connect the speedometer (see accessories in this description).

Motosign mini black control lamps

Motogadget Combiframe for Motogadget Mini Tacho. The perfect holder for the mini speedometer with intriguing LED control lights (5 pieces). The retaining plate is also required for the mounting. Color: Black (other colors on request)