€0.00*

Öhlins Fork Cartridge Bobber

Skip image gallery

€771.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
€123.00*
from €689.00*
€55.00*
€37.95*
€250.00*
item number: FKS 219
Shop-number: CB11602M

Product information "Öhlins Fork Cartridge Bobber"

22mm fork cartridge from Öhlins for the Triumph Bobber.
We completely convert your fork to a valve controlled system with Öhlins fork springs. This turns the simple standard fork, which works according to the old two-pipe system, into an ultra-modern fork with a fully adjustable cartridge system. The rebound, compression and spring preload are fully adjustable. This rebound and compression stage is responsible for the spring out and compression speed. Thus the fork can really be adjusted to all conditions from soft to sporty tight only by a few revolutions at the adjusters, and results in such a completely new driving feeling. The adjustment range of the rebound and compression stage can really be described as large and effective, which is not really the case with all forks on the market.

Assembly instructions are included in the kit. But you should have some knowledge about chassis technology!We are happy to carry out the conversion at our own Öhlins Service Center. Please order the additional article "Einabu Öhlins FKS fork cartridge" (see accessories in this description).

Since the chassis of the Bobber is very many riders simply too hard and uncomfortable, this cartridge in connection with a nine and better strut is exactly the right way to make his Bobber more comfortable.

Please note that the delivery does not include fork oil or fork springs, both have to be ordered separately (see accessories in this description).
Without TÜV certificate. However, it will be delivered with a declaration of suitability, with which it can be registered without any problems.

Since the fork springs are available in different spring rates in order to be able to adjust the cartridge to the respective rider weight, please state the rider weight (with motorcycle clothing) in the commentary of the order.

Triumph LC models from 2016:
  • Bobber
Triumph LC ab 2016
Bobber 19"
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Fork springs Cartridge
Fork springs Cartridge CB11103 / RS8
Öhlins fork springs for BMW R9TScrambler, Pure, Racer & GS. Necessary for the Öhlins fork cartridge. Please specify the drivers weight (with motorcycle clothing) in the comment field when ordering, so that we can take the perfectly fitting spring for your weight.

€123.00*
Öhlins shock absorber Bobber / Speedmaster
Öhlins shock absorber Bobber / Speedmaster CB11603M / RS2
Öhlins shock absorber for the Triumph Bobber / Bobber Black & Speedmaster with adjustable rebound damping. Customised to your weight! The original shock absorber on the Bobber and Speedmaster is simply far too hard and very uncomfortable (it also has no negative suspension travel). To avoid getting hit in the back with every small bump (which happens very quickly with the sitting position / body posture on the motorbike in conjunction with a bad shock absorber), you need to replace your shock absorber. The shock absorber is supplied with ABE. It therefore does not have to be registered with the TÜV. The shock absorber is customised to your weight and delivered with a perfect fit.Production time approx. 1-2 working days (provided the shock absorber is in stock) About the shock absorber The Öhlins shock absorber is a high-quality separating piston damper and not an emulsion damper, as sold by some other manufacturers.The spring preload (which is of course adjusted to your weight) is infinitely adjustable via the thread.The rebound can be individually and very finely adjusted via the rotary wheel (clicks). Shock absorber customised to you Each Öhlins shock absorber is individually adjusted in-house to the rider's needs and weight and fitted with the appropriate setup.We have different spring rates available from Öhlins so that the shock absorber can be perfectly customised for you. It is therefore important that you tellus your weight and riding requirements (ready to ride with clothing) when ordering (in the comments field in the last step of the ordering process). Classicbike-Raisch tip / accessories If you want an all-round good suspension on your Bobber, we recommend having a Cartidge installed in the fork (see accessory products below the product description) Many Bobber riders complain that the footrests touch down too early. We offer a suspension lift for the shock absorber or a complete kit consisting of several parts. Both also work in combination with the Wilbers shock absorber. See accessories below the description.

€689.00*
Details
Fork disassembly / cleaning CB12012 / RS0
If a fork is particularly worn, it is recommended to disassemble it completely, clean it and install new oil seals + dust caps (see accessories).

€55.00*
Öhlins fork cartridge oil
Öhlins fork cartridge oil CB11430 / RS0
Required when installing a fork catridge in an original fork.

€37.95*
Installation Öhlins FKS fork cartridge
Installation Öhlins FKS fork cartridge CB12011 / RS0
If you want to have an Öhlins fork cartridge installed in our workshop (Öhlins Service Center) you have to order this article here.The price is for the installation of the cartridge with delivered fork. Seal rings and dust caps will not be changed. For higher mileage / signs of age we offer these parts & the assembly separately (see accessories in this description).If you want to do this all-inclusive, because you want to do something good for your fork or you are sure that the parts have to be done, you can order the additional article "fork disassembly / cleaning" and the set of oil seals (see accessories in this description). If this should not be done, we will of course assess the fork on site and contact you if the parts should be done.

€250.00*