Ceramic coating Zard R9T single Slip on

Beautiful classic exhaust system for Bonneville with ABE. Fits the T120 & T100 (for the Euro 5 models built in 2021 but currently still without ABE). For T100 the exhaust has no official approval (will be delivered with number for T120). You are welcome to call us to find out exactly what this means. This is what an exhaust for a classic English motorbike should look like (bottle design, that's all you really need to say...) Nice, muffled sound, see for yourself. Sound video Completely made of stainless steel with ABE. Fits the original manifold. If you want it a little louder right from the start, you can simply remove the DB-killer and shorten it a little.

Zard 2-2 Slip-on exhaust system for Thruxton 1200 R. Also fits Speed Twin & Thruxton RS/TFC. However, these models are not listed in the ABE - we will be happy to explain exactly what this means over the phone.A beautiful, short rear silencer for the Thruxton. Elegantly finished with visible weld seams. Available in stainless steel or titanium. The exhaust sounds nice and muffled and throaty. The exhaust is fitted with removable DB killers for those who want an even throatier sound. We also offer racing DB killers specially manufactured for this exhaust system. These provide a nice throaty sound (as it should be), but it still looks legal as there is a DB-killer inside (see accessory article in this description). The exhaust is available as a road version (with EC approval) Racing version (without EC approval) - this is significantly cheaper and also available on request.

Zard 2-2 Slip-On muffler for R9T Scrambler. A Scrambler exhaust as it is in the book! This is exactly how the exhaust must look on a Scrambler. Two slim, tapered mufflers that are nice and tight on top of each other. That paired with the grilles at the end of the exhaust provides just the right look that a Scrambler needs! In addition, the exhaust also impresses with its beautifully muffled and rich sound, as it should be for a 2-cylinder boxer. The sound is already audibly better and throatier through the exhaust, but in our ears does not bring the desired AHA effect that one hopes for. We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-killers to order (See accessories article in this description without road approval). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage here remains that a DB-killer is installed, the bike is not too loud and it looks like everything is original. In the basic version, the exhaust is supplied in stainless steel blank (also looks very nice). Optionally, the exhaust can also be ordered in black ceramic-coated.

Zard 2-2 Six Days overhead exhaust system for Triumph Street Scrambler & Scrambler 900 The Zard 2-2 High exhaust system with E-number is a real highlight for anyone who wants to give their Triumph Street Scrambler a new look and a really rich sound.The two massive original silencers are replaced by short, crisp stainless steel silencers - a huge upgrade both visually and in terms of sound. Approval & models - With E-number / ABE - approved for Euro 4 & Euro 5 models- Available as road version (with EC approval)- Racing version only on request (not in stock) - this is a good deal cheaper. Design & variants Stainless steel (silver) - classic look with silver heat protection platesOptional: black powder-coated heat protection plates Black ceramic-coated - completely in elegant matt black The exhaust emphasises the sporty lines of the Scrambler and ensures a clean, modern look at the rear. Sound & Performance Typical Zard - deep, muffled and throaty!The system is equipped with removable DB killers for those who want an even rougher sound. 🎥 Sound check: see video below the description. For even more power, we offer racing DB killers - specially developed by us for more power and a real Zard sound. (See accessories in this item description.) DB-Killer removal service The removal of the DB-Killer is time-consuming due to welded points.If you would like us to do this for you directly:➡️ Order the additional article "DB-Killer removal Zard exhaust (CB11514)". For Swiss customers For customers from Switzerland, we can supply the system with a declaration of suitability on request. 🎥 Installation video:At the end of the description you will find a suitable installation video with all the installation details.

Zard Short stainless steel exhaust for Triumph Bobber & Speedmaster 1200 / with approval Short: short design - this frees up the entire rear wheel on the Bobber.The look changes significantly and appears even cleaner and more uncompromising. Road approval With E-number for Euro 4 & Euro 5 models. Note Speedmaster 1200:The system fits technically, but is not homologated for this model (but is supplied with the E-number for bobbers).If you would like to know more about this, you are welcome to give us a call and we will find out more. The exhaust is also available as a racing version (without E-number) which is significantly cheaper. If required, please contact us personally. Sound Nice muffled sound - see for yourself (video at the end of the description). If that's not enough, you can: remove the removable DB-killer or insert a racing DB-killer install an X-pipe (cat replacement) - see accessories below this description This gives you exactly the sound you want from a bobber. DB-Killer removal:To remove the DB-Killer, a welding point that is difficult to access must be drilled out and milled away.If you would like us to do this for you, order the additional item "DB-Killer removal Zard exhaust CB11514" (see accessories).Racing DB-killer:We have developed special racing DB killers for this exhaust.More sound than standard and also a little more power, as the original DB-killer damps very heavily. See accessories in this article description. Material & installation The stainless steel slip-on exhausts from Zard are always of a very high quality and fit perfectly.They are simply plug & play onto the original manifold. The conversion is completed in a good 20 minutes. Swiss customers / authorisation For Swiss customers, the exhausts can be supplied with a declaration of suitability.

Zard 2-2 slip-on muffler for R9T Scrambler in Hardy style. Two beautiful top-mounted mufflers that are tapered and have a slanted end cap. Due to the slanted end caps, the exhaust opening looks particularly large and provides the cool megaphone look.In addition, the exhaust also impresses with its beautifully muffled and rich sound, as befits a 2-cylinder boxer. The sound is already audibly better and throatier through the exhaust, but does not bring in our ears the desired AHA effect that one hopes for. We recommend the people who like it a little more throaty and louder, our additional Zard Racing DB-killers to order (See accessories article in this description without road approval). With the racing DB-killers the bike then has the throaty and nice dull bassy sound that a 1200cc engine should have! The advantage here remains that a DB killer is installed, the bike is not too loud and it looks like everything is original.