Flat Seat for all BMW R nineT models A really lovely, flat and narrow seat for your R nineT. The flat shape and the raised centre section give the rear a clean, sleek line – exactly how an R nineT should look. Contents - Seat with high-quality faux leather cover (available in black or light brown)- GRP tail cap, finished in matt black- Original BMW gel emblem Fitting The seat can be easily swapped for the original on a plug-and-play basis. Our tip for the perfect look If you want a really stylish and sophisticated look, we recommend adding our black, CNC-machined BMW emblem. The seat also looks particularly good when combined with our LED Stripe rear kit.You’ll find both listed below this description under the accessories section. Classicbike-Raisch Comfort Tip We’ve all been there – on long rides, we all end up with a sore bum at some point. That’s why we stock the SW-Motech comfort seat cushion. The cushion consists of lots of individual air chambers and is simply secured to the seat with two straps. You can use a valve to adjust how firm or soft you want your seat to be.This cushion virtually solves the problem (I speak from personal experience – I spend two weeks every year on my bike from morning till night).It’s also suitable for everyday use, for anyone who wants maximum comfort on their bike.You’ll find the cushion below this description amongst the accessories.

The RBH rear frame kit, for BMW R nineT models, is handmade in Germany by our partner company KRT Frameworks. The kit visually continues the original round tube frame of the RnineT and closes the rear with a rear round arch frame loop, which gives the RnineT a very unique effect. The original cast aluminum frame triangles are omitted, making the seating area look tidier & narrower. We also have the matching, ready upholstered seat in the program, alternatively we also offer the unupholstered seat base plate, which you can have individually covered by the saddler of your choice (you can find under the accessories in this description). If you don't want to combine our rear frame with the central RBH license plate holder (see accessories in this description) but with the side holder from KRT, you can attach turn signal holders (included) in the rear area of the enclosed base plate. The base plate has suitable for this in the area of the turn signals cable bushings to lead the turn signal cable hidden upwards. If you decide for our version without recessed taillight, of course, 3 in 1 turn signals can be used here. The turn signal holders have an 8mm hole, so they are suitable for the common accessory turn signals.In addition, the bottom plate relocates the control unit and the OBD connector located in the front area a bit further up. The integrated brackets ensure a tidy, clearly structured cable routing and hold the components securely in their new place. This allows the bottom panel to be flush with the lower edge of the rear frame. You can also order the turn signals and other accessories as a set (some parts like the turn signals are then discounted). To buy the kit as a set, you have to click on the button "buy as a set" below the shopping cart button. As mentioned above, we offer the RBH rear frame in different versions. Besides a version without rear light, there are 3 versions with integrated rear light. Rear light version MONO: Recessed round LED taillight with 18mm diameter. Very discreet, yet extremely bright, of course with integrated brake light. With ABE. Taillight version SHORTY: Recessed 50mm wide and 8.5mm high SMD Technology based LED taillight / brake light, thus extremely bright. With ABE. Taillight version STRING: 120mm wide, 10mm high LED taillight adapted to the frame radius, form-fitted into the rear frame. Of course also with integrated brake light. With ABE.   If you drive an overhead exhaust system (eg original Scrambler, or accessories such as Unit Garage, etc.), we also have a suitable exhaust holder in the program. (see accessory article in this description) The rear frame is made of steel. The round tube is bent from one piece and welded in a welding jig, with the lasered and edged retaining plates. Housings are made for the tail lights, which are recessed into the frame loop and also TIG welded. After grinding these welds, the frame gets a tough black satin powder coat finish. The lower plates are made of 2mm thick aluminum sheets, then the brackets for the electronic components are riveted on and the threaded rivets for the turn signal holders are inserted. These are also powder coated in the same black as the frame. As accessories, we recommend you to order for easier assembly still turn signals and taillight plugs. In addition, the colored license plate screws still make very good. You can find them under the accessories in this description. The entire kit is both with central and lateral license plate holder legal, street legal and does not need to be registered at the TÜV.    You are interested in how such a RBH frame is made by hand? Then watch the video!

GFK Racer Rear suitable for all R9T models gives each R9T a completely new look.We have often been asked if there is a Plug&Play solution to completely change the rear of the R9T. Finally they are here now.The Racer rear is delivered ready to mount, including mounting material and an LED tail light (which is integrated into the rear). The assembly is also relatively simple (see assembly instructions in the downloads of this article description).This rear is made of high quality GFK and is perfect for painting.Not included in the delivery is: the cell rubber seat cushion, a license plate holder (we recommend to use a lateral one to have the nice rear as free as possible), as well as the indicator holder mounted on the photos. But you can find all these things under the accessories in this description.In addition we recommend to order the "adapter plug accessory rear light" for better wiring (also to be found in the accessories). The JVB Moto rear fits perfectly into the design of all JVB Moto things for the BMW R9T series (air tunnel, lamp mask, R9T Racer fairing, front fender).

Unit Garage Genuine Leather Comfort Seat with Gel Cushion, suitable for all BMW R nineT models.  The Biposto seat is handcrafted. It is made from truly high-quality leather sourced from an Italian tannery. From the very first touch, you can feel just how soft and luxurious the leather is. A cotton thread in a contrasting colour is used for the stitching (a light-coloured thread for the black seat / a yellowish thread for the brown seat).The seat gives the BMW R nineT models a beautifully sleek silhouette.  To ensure a very high level of seating comfort, a lightweight gel seat cushion is incorporated into the seat’s padding. This makes the seat a truly comfortable one, far surpassing the comfort of the original seat and ensuring it is well-suited for long-distance riding. To make the leather slightly water-repellent and to maintain it regularly, we recommend the Unitgarage waterproofing spray (which you’ll find amongst the accessories in this description).If your motorbike is occasionally left out in the rain, you can also order a rain cover for the seat (also available under the accessories section).  Classicbike-Raisch Comfort Tip We’ve all been there – on long rides, at some point our bums start to ache. That’s why we stock the SW-Motech Comfort Seat Cushion. The cushion consists of many individual air chambers and is simply secured to the seat with two straps. Using a valve, you can adjust how firm or soft you want your seat to be.This cushion virtually solves the problem (I speak from personal experience – I spend two weeks every year on my bike from morning till night).It’s also suitable for everyday use, for anyone who wants maximum comfort on their bike.You’ll find the cushion below this description amongst the accessories.

Unit Garage Komfort Sitzbezug in verschiedenen Farben für die Standard Sitzbank der BMW R12 G/S    Dieser Sitzbezug (wahlweise in Kunst oder Echtleder) erhöht durch eine auf der Innenseite, zusätzlich angebrachte Schaumstoffschicht den Sitzkomfort bei deiner G/S. Grundlegen hat die originale Sitzbank ja eine sehr schöne form, weshalb es reicht, den Komfort und die Optik durch andere Farben zu ändern.  Du kannst dir die Sitzbank in klassischen Schwarz oder Braun (Echtleder) bestellen oder in knalligen Retro Farben (Kunstleder), die den Stiel der G/S stark unterstreichen.Grade die Retro Farben sorgen zusammen mit weiteren Unit Garage Retro Teilen für einen richtig coolen Old School Rallye Dakar Look.Weitere Produkt Empfehlungen für den Retro Stiel findet ihr unterhalb dieser Beschreibung unter den Zubehör Produkten.  Montage:  Die fachgerechte Montage erfordert etwas handwerkliches Geschick.Wenn du dir das nicht zutraust, empfehlen wir zu einem Sattler zu gehen (probieren geht hier aber über studieren, da man eigentlich nichts kaputt machen kann).Vorgehensweise:1. Den Sitz vom Motorrad abnehmen2. Originalen Sitzbezug lösen, indem du die Klammern entfernen3. Neuen Sitzbezug mit neuen Klammer (Schuss Tacker) befestigen. Polster vorab ordentlich zentrieren. Passend für die standard Sitzbank der R12 G/S    

Unit Garage comfort seat cover in various colours for the rally seat of the BMW R12 G/S This seat cover (available in imitation or genuine leather) increases the seating comfort of your G/S with an additional layer of foam on the inside. You can order the seat bench in classic black or brown (genuine leather) or in bright retro colours (imitation leather), which emphasise the style of the G/S.The retro colours, together with other Unit Garage retro parts, create a really cool old school Rallye Dakar look.Further product recommendations for the retro handle can be found below this description under accessories. Installation: Professional assembly requires some manual skill.If you don't feel confident doing this, we recommend going to a saddler (but the proof of the pudding is in the eating, as you can't actually break anything).Procedure:1. remove the seat from the motorbike2. loosen the original seat cover by removing the clips3. attach the new seat cover with a new staple (shot stapler). Centre the upholstery properly beforehand. Suitable for the original BMW Rallye accessory seat of the R12 G/S

Seat cover / seat hump in a Flat Style design for the original seat of the BMW R12 nineT     Style The BMW R12 nineT / R12 S is practically crying out for a flat tail section.We have made it our mission to develop the perfect solution here:The flat tail section integrates absolutely seamlessly with the nineT’s original rear end, seat and rear light. The rear end looks particularly good when combined with ourRear Eliminator Kitfor the R12.You’ll find this listed under the product description in the accessories section. Pictures speak louder than words – the product images speak for themselves. BMW emblem: Please note, the emblem is NOT included in the delivery. We recommend ordering our black Milled emblem to go with it (as shown fitted in the pictures). You’ll find it amongst the accessories listed below this description. Well-designed plug-and-play mounting system Our Classicbike-Raisch flat hump cover isn’t just any old cover that we’ve quickly designed to offer ‘something’ for the original seat.Many hours have gone into the design to ensure the look is as clean and harmonious as possible. The entire mounting system, which ensures the hump is held perfectly in place, sits invisibly beneath the cover.This keeps the exterior design absolutely clean –no visible screws. High-end quality – Made in Germany The Flat Seat cover was developed and designed entirely in-house.It is manufactured in Germany in small batches using state-of-the-art 3D printers – to the very highest standard. Surface options RAW:Unpainted, but already primed. Simply have it painted in your chosen colour by a professional painter. Matt Black:Pre-painted in a silk matt black finish – ready to fit straight away.

Short Unit Garage 1-piece rear fender for your BMW R nineT Roadster The shortest rear end for true individualists Are you looking for one of the most compact and stylish rear ends for your BMW R nineT Roadster? With the Unit Garage 1-piece rear fender, you can take your bike to a new level! This rear fender is one of the shortest currently available on the aftermarket for the nineT Roadster – perfect for a clean, minimalist look. Optimized for the R nineT Roadster and Classic models On the Roadster and Classic models of the BMW R nineT, the pillion frame and the entire rear frame can be removed and replaced with screws. This makes it super easy for you to convert to a sleek 1-man rear end. But let's be honest: if you just remove the rear frame and the pillion pad, the rear often looks unfinished. This is where the Roadster rear end from Unit Garage comes in. With this rear end, you not only get the option of removing the pillion section, but also a clean and stylish finish – so your bike looks great all round! Complete kit with everything you need The kit includes everything you need for the conversion: Detailed assembly instructions All the necessary mounting materials The conversion is quick and easy, so you can get started right away! Lighting: modern LED technology The kit includes an LED stripe rear light that combines a rear light, brake light and turn signal in one. Particularly cool: the turn signals light up at the ends of the stripe (watch the video in the product description). Note: The rear light does not have an E-number/approval. However, in our experience, there are no problems with authorities because the rear light and turn signals are very visible. Compatible with side license plate holders The 1-man rear fender is compatible with all side license plate holders in our range. You can find these directly below the product description in the accessories. Paintwork The rear kit is available directly from the manufacturer Unit Garage in a range of colors (these are all compatible with the Unit Garage tanks that we also have in our range).The kit is also available in RAW/unpainted, so that you can then have the rear painted in your favorite motorcycle color.