Flat Seat Höcker - R12 nineT
€329.00*
| item number: | CBR-R12-KIT-0109.GF |
| Shop-number: | CB12855 |
Product information "Flat Seat Höcker - R12 nineT"
Seat cover / seat hump in a Flat Style design for the original seat of the BMW R12 nineT
Â
Â
Style
The BMW R12 nineT / R12 S is practically crying out for a flat tail section.
We have made it our mission to develop the perfect solution here:
The flat tail section integrates absolutely seamlessly with the nineT’s original rear end, seat and rear light.
The rear end looks particularly good when combined with ourRear Eliminator Kitfor the R12.
You’ll find this listed under the product description in the accessories section.
Pictures speak louder than words – the product images speak for themselves.
BMW emblem: Please note, the emblem is NOT included in the delivery. We recommend ordering our black Milled emblem to go with it (as shown fitted in the pictures). You’ll find it amongst the accessories listed below this description.
Well-designed plug-and-play mounting system
Our Classicbike-Raisch flat hump cover isn’t just any old cover that we’ve quickly designed to offer ‘something’ for the original seat.
Many hours have gone into the design to ensure the look is as clean and harmonious as possible.
The entire mounting system, which ensures the hump is held perfectly in place, sits invisibly beneath the cover.
This keeps the exterior design absolutely clean –no visible screws.
High-end quality – Made in Germany
The Flat Seat cover was developed and designed entirely in-house.
It is manufactured in Germany in small batches using state-of-the-art 3D printers – to the very highest standard.
Surface options
-
RAW:Unpainted, but already primed. Simply have it painted in your chosen colour by a professional painter.
-
Matt Black:Pre-painted in a silk matt black finish – ready to fit straight away.
| BMW R12 |
R12 S
R12 nineT
|
|---|
10
10
10
10
Stellen Sie eine Frage
Accessories
Rear Eliminator Kit - R12 nineT
CB12808
/ RS-10
€139.95*
Rear conversion kit / mudguard eliminator kit for BMW R12 nineT
Made in Germany by Classicbike-Raisch
Give your BMW R12 nineT a modern and minimalist design with our rear conversion kit, which was developed legally and in accordance with legal requirements. Depending on the choice of licence plate holder, TÃœV registration may be required.
The kit ensures a significantly shorter, tidier rear end and replaces the original, long plastic licence plate holder. The result: a harmonious, clean motorbike design with a flat, sporty line.ATTENTION FOR MODELS WITHOUT CENTRAL REAR LIGHT - US market modelsNew 3 in indicators are required for these models. Click here to get the right kit.
Necessary accessories
Indicator holder
There are no indicator holders in the kit, as you have a choice of different ones:
Option 1: Indicator directly at the end of the rear (legal position)Option 2: Turn signal holder frame (even cleaner rear but no legal position)
LED indicators
The original indicators are not compatible. Accessory indicators with M8 thread must be fitted. Suitable models can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Tens
Motogadget PIN
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Side licence plate holder
The original licence plate holder is removed. A side licence plate holder is required and can also be ordered directly as a set with a discount. You have a choice of four variants:
Raisch Vario holder: Minimalist, inexpensive and variably adjustable, suitable for all licence plate sizes.(Requires individual approval by the TÃœV).
Rizoma holder: High-quality option with parts certificate, no TÃœV registration required.
Adjustable holder: With aluminium number plate and variable adjustment.(Requires individual TÃœV approval.)
AC-Schnitzer holder: CNC-milled with parts certificate.
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Indicator plug: Makes it easier to wire the accessory indicators to the original wiring harness.
Indicator light plug: If you don't want to cut off the original plug, simply order the matching plug as well
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Conclusion
Our rear conversion kit for the BMW R12 nineT transforms your motorbike into a real eye-catcher. Thanks to high-quality materials, simple installation and a wide range of accessories, you can customise your bike and meet the legal requirements at the same time.
Scope of delivery rear kit
The kit contains everything you need to customise the rear as shown in the pictures:
Aluminium rear lower shell: black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
3D-printed brackets: For securely fastening fuses and plugs under the seat bench.
Mounting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Rear Eliminator Kit - BMW R12
CB12955
/ RS0
€139.95*
Rear conversion kit / mudguard eliminator kit for BMW R12
Made in Germany by Classicbike-Raisch
Give your BMW R12 a clean and tidy rear end with our rear conversion kit.The R12 comes from the factory with a very fat rear mudguard that makes the bike look very chopper-like and unsporty. Our Rear Eliminator Kit gives the bike a completely new look. The rear becomes really minimalist.Turn your inconspicuous R12 into a real custom chopper with a sporty look with just a few parts and little effort.The kit has been developed so that you can ride it legally. Stvo compliant! Depending on the choice of licence plate holder, TÃœV registration may be required.
Necessary accessories
Indicator holder
There are no indicator holders in the kit, as you can choose from different ones:
Option 1: Indicator directly at the end of the rear (legal position)Option 2: Turn signal holder frame (even cleaner rear but no legal position)
Indicator / tail light combination
The original indicators are not compatible. Accessory indicators with M8 thread must be fitted. Suitable models can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Tens
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Side licence plate holder
The original licence plate holder is removed. A side licence plate holder is required and can also be ordered directly as a set with a discount. You have a choice of four variants:
Raisch Vario holder: Minimalist, inexpensive and variably adjustable, suitable for all licence plate sizes.(Requires individual approval by the TÃœV)
Rizoma holder: High-quality option with parts certificate, no TÃœV registration required.
Adjustable holder: With aluminium number plate and variable adjustment.(Requires individual TÃœV approval.)
AC-Schnitzer holder: CNC-milled with parts certificate.
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Indicator plug: Makes it easier to wire the accessory indicators to the original wiring harness.
Threaded indicator caps: For a clean look over the nuts of the indicators (included with indicator holder Frame)
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Scope of delivery
The kit contains everything you need to convert the rear end as shown in the pictures:
Aluminium rear lower shell: Black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
3D-printed brackets: For securely fastening fuses and plugs under the seat bench.
Mounting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Conclusion
Our rear conversion kit for the BMW R12 transforms your motorbike into a real eye-catcher. Thanks to high-quality materials, simple installation and a wide range of accessories, you can customise your bike and meet the legal requirements at the same time.
Tail Tidy Kit Short - BMW R12 G/S
CB12963
/ RS0
€199.95*
Rear conversion kit / mudguard eliminator kit for BMW R12 G/S
Including central licence plate holder
Made in Germany by Classicbike-RaischRoad legal
Give your BMW R12 G/S a clean and tidy rear end with our rear conversion kit.The G/S comes from the factory with a really nice short mudguard & a really nice rear end. If it weren't for the ugly, long plastic licence plate holder. With the Classicbike-Raisch aluminium rear kit, all the plastic stuff is removed and your G/S gets the look of a real off-road bike! Pictures speak louder than words.
You get the cleanest rear end for your G/S. And the whole thing comes as a simple plug & play kit with all the necessary assembly materials and assembly instructions.The kit has been developed so that you are legally on the road with it. Stvo compliant! The kit includes a centred number plate holder, which can be adjusted in angle thanks to its vario adjustment.
US market - customers who do NOT have a central tail light but 3 in 1 indicators must order this kit (CLICK)
Necessary accessories
Indicator holder
There are no indicator holders in the kit, as there are several to choose from:
Option 1: Turn signal holder KIT - rear Eli - R12 G/S - directly at the end of the rearOption 2: Turn signal holder Vario - Directly on the licence plate (adjustable in width).
Indicators
The original indicators are not compatible. Accessory indicators with M8 thread must be fitted. Suitable models can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Pin
Motogadget Tens
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Indicator plug: Makes it easier to wire the accessory indicators to the original wiring harness.
Indicator light plug: If you don't want to cut off the original plug, simply order the matching plug as well
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Scope of delivery
The kit contains everything you need to convert the rear end as shown in the pictures:
Aluminium rear lower shell: Black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
Licence plate holder: Vario with angle adjustment
LED licence plate light
Fitting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Conclusion
Our rear eliminator kit for the BMW R12 G/S transforms your motorbike into a real eye-catcher. Thanks to high-quality materials and simple installation, you can give your motorbike a completely new look with just a little effort.
Â
Rear Weck Kit - BMW R12 G/S
CB12965
/ RS0
€199.95*
Rear conversion kit / mudguard eliminator kit for BMW R12 G/S
For all models that do NOT have a centre rear light ex works (e.g. US market)
Including central licence plate holder
Made in Germany by Classicbike-RaischRoad legal
Give your BMW R12 G/S a clean and tidy rear end with our rear conversion kit.The G/S comes from the factory with a really nice short mudguard & a really nice rear end. If it weren't for the ugly, long plastic licence plate holder. With the Classicbike-Raisch aluminium rear kit, all the plastic stuff is removed and your G/S gets the look of a real off-road bike! Pictures speak louder than words.
You get the cleanest rear end for your G/S. And the whole thing comes as a simple plug & play kit with all the necessary assembly materials and assembly instructions.The kit has been developed so that you are legally on the road with it. Stvo compliant! The kit includes a central licence plate holder, which can be adjusted in angle thanks to its vario adjustment.
Necessary accessories
Indicator holder
There are no indicator holders in the kit, as you have a choice of different ones:
Option 1: Indicator holder KIT - rear Eli - R12 G/S - directly at the end of the rearOption 2: Turn signal holder Vario - Directly on the licence plate (adjustable in width).
Indicator / tail light combination
The original 3 in 1 rear light / indicator are not compatible. Accessory indicators with M8 thread must be fitted. Matching and very high-quality indicators can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Tens
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Scope of delivery
The kit contains everything you need to convert the rear as shown in the pictures:
Aluminium rear lower shell: Black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
Licence plate holder: Vario with angle adjustment
LED licence plate light
Fitting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Conclusion
Our rear eliminator kit for the BMW R12 G/S transforms your motorbike into a real eye-catcher. Thanks to high-quality materials and simple installation, you can give your motorbike a completely new look with just a little effort, just like a scrambler should have!
Rear Weck Kit - R12 nineT
CB12966
/ RS-10
€139.95*
Rear conversion kit / mudguard eliminator kit for BMW R12 nineT
For all models that do NOT have a central rear light ex works (e.g. US market)
Made in Germany by Classicbike-Raisch
Give your BMW R12 nineT a modern and minimalist design with our rear conversion kit, which was developed legally and in accordance with legal requirements. Depending on the choice of licence plate holder, TÃœV registration may be required.
The kit ensures a significantly shorter, tidier rear end and replaces the original, long plastic licence plate holder. The result: a harmonious, clean motorbike design with a flat, sporty line.
Necessary accessories
To fully utilise the kit, you will need the following components:
Indicator holder
There are no indicator holders in the kit, as you have a choice of different ones:
Option 1: Indicator directly at the end of the rear (legal position)Option 2: Turn signal holder frame (even cleaner rear but no legal position)
Indicator / tail light combination
The original 3 in indicators are not compatible. Accessory indicators with M8 thread must be fitted. Suitable models can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Tens
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Side licence plate holder
The original licence plate holder is removed. A side licence plate holder is required and can also be ordered directly as a set with a discount. You have a choice of four variants:
Raisch Vario holder: Minimalist, inexpensive and variably adjustable, suitable for all licence plate sizes.(Requires individual approval by the TÃœV).
Rizoma holder: High-quality option with parts certificate, no TÃœV registration required.
Adjustable holder: With aluminium number plate and variable adjustment.(Requires individual TÃœV approval.)
AC-Schnitzer holder: CNC-milled with parts certificate.
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Conclusion
Our rear conversion kit for the BMW R12 nineT transforms your motorbike into a real eye-catcher. Thanks to high-quality materials, simple installation and a wide range of accessories, you can customise your bike and meet the legal requirements at the same time.
Scope of delivery
The kit contains everything you need to customise the rear as shown in the pictures:
Aluminium rear lower shell: black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
Black powder-coated indicator holder: Suitable for all accessory indicators with M8 thread.(Note: original indicators cannot be used. M5 to M8 adapters are required for Kellermann Atto indicators).
3D-printed brackets: For securely fastening fuses and plugs under the seat.
Mounting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Rear Eliminator Kit SIDE - BMW R12 G/S
CB12969
/ RS1
€149.95*
Rear conversion kit / mudguard eliminator kit for BMW R12 G/S - with side licence plate holder
Rear kit for mounting a side licence plate holder (must be ordered as a set)
Made in Germany by Classicbike-RaischRoad legal
Give your BMW R12 G/S a clean and tidy rear end with our rear conversion kit.The G/S comes from the factory with a really nice short mudguard & a really nice rear end. If it weren't for the ugly, long plastic licence plate holder. With the Classicbike-Raisch aluminium rear kit, all the plastic stuff is removed and your G/S gets the look of a real off-road bike! Pictures speak louder than words.
In this kit not like most scrambler bikes with a central licence plate holder but with one on the side. Of course there is a small break in the handle BUT you also have a completely free rear end, which emphasises the off-road look even more. Because a real rally bike has no licence plate at all.The side licence plate holder (there are several to choose from) must be ordered with the description.
Here you get the cleanest rear end for your G/S. And the whole thing comes as a simple plug & play kit with all the necessary installation materials and installation instructions.US market - customers who do NOT have a central tail light but 3 in 1 indicators must order this kit (CLICK)
Necessary accessories
Licence plate holder
There are 4 different holders to choose from: 1. the Vario holder: An inexpensive (but still very high quality) holder reduced to the essentials (the most inconspicuous of all), which fits all licence plate sizes and is variably adjustable in position (must be registered). Mounted on the product pictures2. the Rizoma holder: Probably the highest quality holder of all. This bracket is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÃœV).3. the adjustable bracket: A sophisticated bracket with aluminium number plate, which also has variable adjustment. Must also be registered by individual approval. 4. The AC-Schnitzer holder: A licence plate holder milled from solid material with parts certificate.
Indicators
The original indicators are not compatible. Accessory indicators with M8 thread must be fitted. Suitable models can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Pin
Motogadget Tens
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Indicator plug: Makes it easier to wire the accessory indicators to the original wiring harness.
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Scope of delivery
The kit contains everything you need to convert the rear end as shown in the pictures:
Aluminium rear lower shell: Black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
Indicator holder
Mounting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Conclusion
Our rear eliminator kit in the SIDE version for the BMW R12 G/S transforms your motorbike into a real eye-catcher. The rear is completely free and can perfectly show off its beautiful shape.Thanks to high-quality materials and easy installation, you can give your motorbike a completely new look with just a little effort.
Rear Weck Kit SIDE - BMW R12 G/S
CB12971
/ RS0
€149.95*
Rear conversion kit / mudguard eliminator kit for BMW R12 G/S - with side licence plate holder
Rear kit for mounting a side licence plate holder (must be ordered as a set).For models that do NOT have a central rear light ex works (e.g. US market)
Made in Germany by Classicbike-Raisch
Give your BMW R12 G/S a clean and tidy rear end with our rear conversion kit.The G/S comes from the factory with a really nice short mudguard & a really nice rear end. If it weren't for the ugly, long plastic licence plate holder. With the Classicbike-Raisch aluminium rear kit, all the plastic stuff is removed and your G/S gets the look of a real off-road bike! Pictures speak louder than words.
In this kit not like most scrambler bikes with a central licence plate holder but with a side one. Of course there is a small break in the handle BUT you also have a completely free rear end, which emphasises the off-road look even more. Because a real rally bike has no licence plate at all.The side licence plate holder (there are several to choose from) must be ordered with the description.
Here you get the cleanest rear end for your G/S. And the whole thing comes as a simple plug & play kit with all the necessary assembly materials and assembly instructions.
Necessary accessories
Licence plate holder
There are 4 different holders to choose from: 1. the Vario holder: An inexpensive (but still very high quality) holder reduced to the bare essentials (the most inconspicuous of all), which fits all licence plate sizes and is variably adjustable in position (must be registered). Mounted on the product pictures2. the Rizoma holder: Probably the highest quality holder of all. This bracket is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÃœV).3. the adjustable bracket: A sophisticated bracket with aluminium number plate, which also has variable adjustment. Must also be registered by individual approval. 4. The AC-Schnitzer holder: A licence plate holder milled from solid material with parts certificate.
Indicator / tail light combination
The original indicators are not compatible. Accessory indicators with M8 thread must be fitted. Suitable models can be ordered as a set directly under the product description(incl. 10 % discount).
Recommendations:
Motogadget Tens
Motone Pico
Kellermann Atto (M5 to M8 adapter required)
Rizoma Club / Leggera
Optional accessories
Complete your conversion kit with these practical extras (all of which you can also add to the kit below the description)
Reflector: For 100 % road approval, can be mounted under the licence plate.
Licence plate screws: For secure and aesthetic mounting.
Scope of delivery
The kit contains everything you need to convert the rear as shown in the pictures:
Aluminium rear lower shell: Black powder-coated, for a straight, flat rear line. It also acts as a splash guard and provides space for electronic components under the seat.
Indicator holder
Mounting materials: Including rubber sleeves for neat cable routing.
Installation instructions: For simple plug & play installation.
Conclusion
Our rear eliminator kit in the SIDE version for the BMW R12 G/S transforms your motorbike into a real eye-catcher. The rear is completely free and can perfectly show off its beautiful shape.Thanks to high-quality materials and simple installation, you can give your motorbike a completely new look with just a little effort.