Tail Underplate LC
€59.95*
Available, delivery time: 1-3 days
Zubehörartikel
€114.95*
from €99.95*
from €164.95*
from €219.00*
| item number: | CR-T-TT-US-01 |
| Shop-number: | CB12235M |
Product information "Tail Underplate LC"
This black powder-coated aluminum lower shell replaces the original fender and ensures that the rear area remains closed after the removal of the original fender.
This is notwenidg, so that in the rear of everything splashes, so that the rear continues to look reasonable and so that the electronics are not simply exposed.
Makes sense, for example, if you want to convert your motorcycle to a side Kennzeiechenhalter and build the original fender away.
| Triumph LC ab 2016 |
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5 - Street Scrambler / Scrambler 900
Scrambler 900 / Street Scrambler EU5 +
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5 - Street Twin / Speed Twin 900
Speed Twin 900 / Street Twin EU5 +
Street Cup
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
|---|
999
999
999
999
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Sideway licens plate support Swingarm LC
CB11838
/ RS1
€114.95*
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases.
Without expert opinion. From our experience, however, there are no problems with the green ones.
Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm
Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard
New blinker brackets must also be fitted if the original mudguard is removed.
The accessories described can all be found under accessories in this product description.
License plate holder - Shock LC
CB12638.2M
/ RS1
€99.95*
Classicbike-Raisch Shock mount license plate holder. The simple solution for mounting the license plate on the side of the shock absorber. A side-mounted license plate gives your Triumph a completely free / clean rear end.
The stainless steel base holder is simply pushed behind the shock absorber over the spike and attached together with the shock absorber. Installation is very simple and can be completed in a short time (installation instructions are included).
The license plate can be individually moved inwards and outwards using slotted holes in the base holder and 4 differently positioned holes in the license plate. If the license plate is pushed all the way out, the license plate holder can be registered individually. The scope of delivery includes LED license plate lighting and all necessary mounting materials.
Tips for a complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard
New Indicator brackets must also be fitted if the original mudguard is removed.
The accessories described can all be found under the accessory items in this product description.
Licens holder side ways LC
CB11092M
/ RS2
€164.95*
Thruxton Thruxton, BonnevilleT120 + T100, and all StreetTwin models (does not fit with Thruxton R if the original struts are installed) attached to the strut. For all who have their license plates on the side and on the middle height of the motorcycle want to have their rear already free and clean. In the kit is the license plate with license plate illumination, a complete cable set for the wiring of turn signals, taillight and KZ luminaire, & a fitting instruction. If you do not want to crimp and solder the cable kit yourself, we also offer this as a service (see accessories in this description).
Optionally, the kit can be ordered with a base plate (this is used as a splash guard if you do not want to have a fender installed anymore).
The kit is ideally suited for mounting a taillight / turn signal combination (see accessories in this description). Alternatively, a short aluminum mudguards with classic old school taillight and chic turn signals would look (simply in the lighting category rummage).
There are several points at which the turn signals can be installed in conjunction with the license plate (you can find all the suitable turn signal holders in the accessories of this description).
%
Side mount License support Rear Tire
CB12107M
/ RS2
€219.00*
€279.00*
(21.51% saved)
previously €279.00*
This side license plate holder is mounted on the left side of the swingarm of your machine. The license plate then sits behind the rear wheel (a registration at the TÜV is not necessary).As well as all parts that come from the house KRT Framework, the side license plate holder is of the highest quality and absolutely perfectly thought out.
The license plate holder is welded together from bent tubes as well as laser cut parts. The license plate is then mounted on the high-quality anodized license plate holder plate.Visually just cool as well as on a bobber or a sporty Thruxton / Speed Twin to get a clean rear.
Included are all mounting materials and a small LED license plate light (with E-number). The cables are routed through one of the two tubes so that they are not visible.
If you want to mount your turn signals directly on the license plate (as well as on the blue Speed Twin on the pictures), you can order a set of "turn signal holder KRT" in addition (see accessory article in this description).
If you want to be 100% legal on the road, it is also necessary to have a reflector on the bike. A directly suitable for the license plate holder is also available from KRT (see accessories article in this description).
Note to Thruxton & Speed Twin: Who wants to install the side license plate holder and dismantle the fender, which can still order the bottom shell from our range. You can find this under the accessories in this description.
The license plate is available for different countries in different sizes.
Dimensions of the license plate for the different countries:
Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm
previously €279.00*