Motoscope Mini

Product information "Motoscope Mini"

Motoscope mini black. It doesn't get any smaller than this. With integrated tachometer.

Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessory items in this description).
Also, an additional box is needed to connect the tachometers on many motorcycles (also found under the accessories).
Model specific descriptions can be found below the general description.

The motoscope mini is an extremely small, digital motorcycle instrument. The LED display, which was specially developed by us for this purpose, is unique in the instrument sector. 251 ultra-bright LEDs form an almost rimless, outstandingly readable display surface, which can be used completely for the representation of the display values. Only this innovative, elaborate technology enables a maximum display area with minimum housing dimensions at the same time.

The motoscope mini fits almost any two-, three- or four-wheeler due to its very simple, elegant design and high-quality appearance. It can support the styling in an exposed position, but can also be integrated inconspicuously and 'cleanly' - everything is possible with the mini!

The innovative dot matrix of 251 ultra-bright LEDs displays the engine speed by means of a scalable, horizontal luminous band and all other functions as a numerical value in an easily detectable manner. The speed can also be called up as a numerical value at the touch of a button. To achieve optimum readability in darkness, sunlight and twilight, the luminosity of the LEDs is automatically adjusted. A speed value can be entered for the limit range of the permissible speed ('red range') or as a switching flash function. If this value is exceeded, all LEDs light up pulsatingly at the same time.

The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. Therefore, the instrument can also be mounted upright!

With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays. The standard indication on the display is the speed value. The other measured values can be fetched on the display by a short keystroke if required. Optionally, it can be set that the display automatically returns to the speed value after a short time or that a specific display is fixed.

Presets or stored values remain of course stored even without power supply.
For all bikes with LCD speedometer a break out box is needed: to the article

As a replacement to the not so nice speedo snail we have a spacer Translated with 

Triumph LC
  • To mount a Motogadget speedometer on one of the water cooled Triumph Modern Classic models it is mandatory to install the additional speedometer box LC.
    You can find this under the accessories in this description.

Triumph AC
  • For mounting on all air-cooled Triumph Modern Classic Bikes, we offer a mounting plate (see accessories article in this description).
  • For all models that have a speedometer with LCD display (odometer) from the factory, an additional break-out box is necessary to connect. This box can also be found under the accessories in this description.
  • If your Triumph has a factory speedometer snail, we offer the spacer (this allows you to remove the speedometer snail). See accessory article in this description.

BMW R nine T
  • For mounting on a BMW R nineT is the additional box: Motogadget Mo.Hub BMW R9T needed. 
  • We recommend here but to order the complete kit (see similar articles in this description).

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Thruxton 900 EFI
  • Thruxton Vergaser
BMW R nineT
R nineT /5 EU 4
R nineT Classic EU 4
R nineT Pure EU 4
R nineT Racer
R nineT Scrambler EU 4
R nineT Urban GS EU 4
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Thruxton 900 EFI
Thruxton Vergaser
7
7
7
7

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Speedo Box LC CB12215M / RS0
With the Peak Mod Speedo Box LC it is possible to connect all Motogadget speedometers to the water cooled Triumph Modern Classic models (to date the boxes are not yet available for all Euro 5 models. But some are already available. To be on the safe side, you can ask us for the availability for your bike before ordering). We have the box selbest already installed on some motorcycles and it works really well. The assembly and wiring are really well described and understandable. Assembly instructions and cable assignment diagram can also be found as a download under the downloads in this description. So you can get an idea of the effort in advance. The speedometer box we recommend to mount under the tank of the motorcycles, there is enough space and all cables are very easy to lay.The box is available as a single & dual version. Single: For all models that have only one speedometer installed from the factory. Dual: For all models that have factory installed a speedometer & tachometer.Please specify your motorcycle model + year in the comment field (on the last page in the ordering process) when ordering. For Triumph Bobber & Speedmaster we also offer a mounting plate, with which you can mount a Motogadget Tiny - Speedster - Vintage speedometer on the triple clamp (see accessory article in this description).For all other models you have to build a plate yourself.  Note on the grip heater: If the speedometer box is installed, the original grip heater no longer works (another module is required for this). We sell the box in 2 versions:1. as a bundle at a discounted price of 100€ (this price is only granted if a Motogadget speedometer instrument is also ordered from us).2. single only the box. Models  available :     VIS-T Single  Street twin 2016-2018 Street twin 2019-2020 Street twin 2021-2024 EURO-5 / Speed twin 900 2024 Street scrambler 2016-2018 Street scrambler 2019-2020 Street scrambler 2021-2024 / Scrambler 900 2024 Bobber 2016-2020 Bobber 2017-2020  Bobber 2021-2024 EURO-5   VIS-T Dual T100 2016-2020 T100 2021-2024 EURO-5 T120 2016-2020 T120 2021-2024 EURO-5  Thruxton 1200 Thruxton R EURO-4 Thruxton RS Speed Twin 1200 2019-2021 EURO-4 Speed Twin 1200 2021-2024 EURO 5 Street cup 2016-2018   *NOT SUPPORT LIST. All Speed master. Bobber TFC

From €495.00*
MSM Halteblech CB00254 / RS114
Motogadget MSM Bracket bracket c Black

€26.00*
Motogadget Combiframe CB10748 / RS115
Motogadget Combiframe for Motogadget Mini Tacho. The perfect holder for the mini speedometer with intriguing LED control lights (5 pieces). The retaining plate is also required for the mounting. Color: Black (other colors on request)

€119.00*
Breakoutbox CB00216M / RS8
Motogadget. Break-Out Box. For connecting Motogadget instruments to the injection models with electronic speedometer. Tested by us for 2010/11+2012/13/14/15. Please state motorcycle type and chassis number when ordering! It does not need to be soldered, but must be connected consistently according to our enclosed instructions. The CAN bus installed in the Triumph models reacted immediately by refusing to work if the original instrument was no longer connected. This meant that the desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. In addition to information such as speed and rpm, the mo.tri also provides signals for indicator lights: Blinker left/right, tank reserve, fault memory, high beam, neutral, H2O hot, oil pressure. Some indicator lights on instruments with 4 or 5 LEDs have multiple functions. Another big advantage is the almost foolproof installation! The original connector is used and the cables for the instrument and indicator lights are connected to the terminals of the mo.tri using a color scheme. No soldering or searching for cables required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A big time saver and therefore worth hard cash.   PLEASE STATE YEAR OF MANUFACTURE AND CHASSIS NUMBER!

€199.00*
Motosign Mini CB00253 / RS113
Motosign mini black control lamps

€89.00*
Spacer CB00269M / RS200
Spacer Front wheel As a replacement for tachometer worms after installation of a digital tachometer

From €24.95*
Switch CB00213M / RS151
Stainless steel button to set the speedometer menu.This button can be used e.g. simply integrate it into the retaining plate of the speedometer and can then jump around in the menu of the speedometer and adjust everything.

From €18.05*

Ähnliche Artikel

%
Motogadget Mo.Hub Kit BMW R9T / Mini CB12045 / RS-1
Motogadget Mo.Hub KIT for BMW RnineT Euro4 models. Includes milled bracket for the Motogadget Mini speedometer & the Combi Frame, specifically for the BMW R9T.The Mo. Hub allows to connect the Motogadget speedometers: Mini, Chrono Classic & TIny (see accessory articles in this description) almost plug & play (a smartphone with the Motogadget Mo. Ride app is mandatory). In addition, the Mo.Hub makes it possible to use the Motogadget app Mo.Ride. Functions Mo.Hub: The mo.hub receives data like speed, RPM and indicator lights from the digital vehicle bus (LIN bus) and converts them into usable signals for the motoscope tiny or mst speedster. The control lights of the instrument partly represent several functions (by continuous light or flashing). According to the clear assignment table, the vehicle plug and the instrument are connected to the contact strips of the mo.hub. Then only the vehicle plug has to be plugged into the counterpart of the BMW. The connection is ready. This is almost plug & play. Then the smartphone and the mo.ride app are paired with the mo.hub via Bluetooth. This automatically applies all the necessary settings correctly and it can be started immediately.Encrypted connection via Bluetooth® LE (Low Energy), therefore tamper-proofextremely low power consumption of smartphone and mo.hubthe highly sensitive accelerometer allows to display your driving activity in mo.ride by an activity factor, number of turns, top speed and other statisticsmonitoring of the current battery voltage in the appFirmware updates possible without removal at any place via smartphone and appConfiguration possible without removal at any location via smartphone and appVehicle management in the appMaintenance management through automatically updated mileage with notes on maintenance tasks, service tasks, condition of tires, brake pads, oils, operating fluids, spark plugs, etc.Tour tracking records all journeysLogbook stores all generated vehicle messages and maintenance tasksdisplay of parking position and Ping! to help with vehicle searchsoon 'ride mode' will be integrated into the app. There you can compose your own dashboard from different measurements and displays. E.g. timing 0-100 km/h, temperatures, altitude meters, curve counter, tilt angle, compass, fun factor, weather data and much more. Technical requirements: The mo.hub is compatible with all models of the RnineT series with Euro 4 (from model year 2017). Also Urban G/S, Pure, Racer and Scrambler. It currently supports the instrument series mini with combi frame, tiny and classic. To install the mo.hub kit, you need our app mo.ride in any case. Without smartphone and app, the mo.hub can not be put into operation! The app works with smartphones that use the Android 8.0 operating system and iOS 12.4 or higher. In rare cases, compatibility may be limited due to the device. More info about the app also at mo.ride.de or in Google Play and iTunes.   Scope of delivery: mo.hub single BMW R9T LIN -mo.hub with cover and mounting possibility the vehicle connector to the BMW RnineT Euro 4the milled and black anodized bracket for the MOtogadget Mini Instruement & Combi Frame, especially for BMW R9T Euro 4the detailed installation and operating instructions via the appthe mobile app mo.ride via Google Play and AppStore (free of charge) ATTENTION: The delivery does not include a speedometer. This must be ordered separately.See accessories article in this description. 

€149.00* €216.00* (31.02% saved)