Short Rear Fender Kit Bobber

€269.95*

€349.00*

€329.00*

€31.95*

€698.00*

Design

item number:	106484-F15
Shop-number:	CB11411M

Product information "Short Rear Fender Kit Bobber"

Short rear mudguard with indicators / rear light - Triumph Bobber

This short steel mudguard replaces the original, very long rear mudguard of the Bobber and at the same time eliminates the large original rear light traffic light system.
This makes the rear look much cleaner, shorter and more harmonious - pictures speak louder than words.

The mudguard is unpainted and can be finished as desired or deliberately left with a metal look.

Plug & Play assembly

The kit was deliberately developed to be as easy to fit as possible.

- All original mounting points are retained
- No drilling
- no improvisation

The mudguard can be fitted plug & play.

Integrated rear light / indicator solution

Included in the scope of delivery:

- two CNC-milled support struts
- Integrated rear light / indicator combination
- E-number (road approval)

The indicator cables run invisibly inside the struts.
This keeps the rear as clean as possible.

Recommendation for licence plate holder & cable set

We recommend for a harmonious overall look:

- the side licence plate holder from our range
- the matching Classicbike-Raisch cable set

The cable set makes installation and wiring much easier and ensures a clean, safe solution.

Note for models built from 2023 onwards

For Bobber models from model year 2023 onwards, a blocking diode must be installed on the rear lights according to the Wunderkind installation instructions.

- The diode is included in the scope of delivery
- If you use our cable set, this step is not necessary
- the diode is already integrated in the cable set

Available surface variants

The mudguard is available in three versions:

Variant 1
Raw, untreated steel

Variant 2
Black silk matt powder-coated
Similar finish to most motorbike frames

Variant 3
High-gloss black powder-coated
Very high-quality powder coating with high gloss, visually close to paint
No 110 % perfect paint surface as with filled and sanded paint

Note on the surface

The mudguard is handmade and made of steel.
This means that slight structures and unevenness are due to the material and may still be visible after powder coating.

Who:
- an absolutely perfect surface
- or a different colour

want to have the mudguard primed and painted.

Our recommendation:
Have the mudguard powder-coated in advance (e.g. variant 2 black matt) and then paint it.
This provides optimum rust protection and the best basis for a perfect paint finish.

Triumph LC models from 2016:	Bobber Bobber Black

Triumph LC ab 2016	Bobber 16" / Bobber Black EU 4 Bobber 16" / Bobber Black EU 5 Bobber 16" / Bobber Black EU 5 + Bobber 16" / Bobber Black Euro 5 + / BJ 2026 - Bobber 19"

Accessories

Bobber - Short Steel Front Fender CB12537 / RS0

This short steel fender replaces the original fender, which is significantly longer.Unlike the short fender from the Triumph accessories, the Motone fender has no bead in the middle, which is visually much better to the short rear fender conversions, which also have no bead (matching rear fenders can be found under the accessories products in this description). The fender is made of sturdy steel, which, as with the original fender, further ensures the stiffening between the fork legs. The fender is supplied in glossy black.

€269.95*

CNC-machined side concentration camp badge holder CB11182M / RS2

CNC-milled side number plate holder for Triumph Bobber / Speedmaster, complete with parts certificate. This is exactly how a proper Bobber should look! On a Bobber, the number plate simply belongs on the side, not on the mudguard. What’s more, this side number plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 – Street Twin / Scrambler / Cup – Scrambler 900 – Speed Twin 900 The holder is beautifully CNC-machined and black anodised. An optional bracket is available for those who wish to continue using their Bobber’s original rear light, and a reflector fits onto the number plate holder (see accessories in this description). Details at a glance+ Side-mounted number plate holder+ 3-position width adjustment of the plate (towards or away from the wheel) + Option to tilt the plate by 30°+ Integrated LED lighting + Number plate can be inserted into the frame from above + Concealed internal cable routing + Surface finish with BLACKPearl anodising + CNC-machined aluminium+ Design: WUNDERKIND Custom Parts certificateThe holder is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed), it must be registered via individual registration (which is not a problem, however, thanks to the existing parts certificate).PLEASE NOTE for Bonneville models: On these models, the mount is NOT compatible with the original exhaust. The number plate is available to fit German (standard and 200x220 sizes), Austrian, Swiss and French number plates. Country Dimensions of number plateGermany: 180x200 mmGermany (large): 220x200 mmFrance: 210 x 130 mmAustria: 210 x 170 mmSwitzerland: 180 x 140 mmLuxembourg: 200 x 140 mm Versions without frame markingsDenmark: 245 x 170 mmItaly: 182 x 182 mmNetherlands / Belgium: 215 x 145 mmSpain / Norway: 225 x 165 mmUnited Kingdom: 234 x 183 mmCzech Republic / Poland / Sweden: 202 x 162 mm

From €349.00*

Details

Steel Front Fender Bobber CB11413M / RS2

Metal front fender for the bobbers.Can be exchanged Plug&Play. Can be painted if necessary or simply installed in the Steel look (but must then be painted with clear varnish and powder coated, otherwise the steel will rust). Harmonizes perfectly with the Steel-look rear fender kit (see accessories in this description).The fender is available in 3 versions.Variant 1: Raw untreated steelVariant 2: Black silk matt powder coated (similar surface as most motorcycle frames)Variant 3: Black high gloss powder coated. This coating comes, by the extremely high-quality powder that is used, a black shining lacquering really very close (see photos)!But you can't expect a 110% perfect surface like from a painter who primes and grinds the fender beforehand.Since the fender is made of handmade stainless steel, it has a structure and slight unevenness (which you can easily see after powdering). If you want it perfect or in a different colour, you have to prime the fender and then have it painted. But we would still recommend to powder the fender in advance, because this is the perfect rust protection (but then variant 2 black matt is sufficient).If you would like to have the mudguard powder-coated in black (silk matt), you can order the product "Surcharge mudguard black" in the accessories of this description. Since the fender is made of handmade stainless steel, it has a structure and slight unevenness (which can be easily seen after powder coating). If you want it to be perfect you have to prime the fender and then have it painted. However, we would still recommend to have the fender powdered beforehand, as this serves as perfect rust protection.The black detail photos show the rear bobber fender and serve only to illustrate the colour tone.

From €329.00*

Details

Wiring harness accessories taillight & turn signal - LC CB11222M / RS600

This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.

From €31.95*

Details

Short Rear Fender Kit Bobber

Product information "Short Rear Fender Kit Bobber"

Short rear mudguard with indicators / rear light - Triumph Bobber

Stellen Sie eine Frage