Cafe Racer Seat - Speed Twin 1200

€199.00*

€216.00*

€318.00*

€89.99*

€399.00*

item number:	A9700662
Shop-number:	CB12842

Product information "Cafe Racer Seat - Speed Twin 1200"

Triumph Genuine Accessories Café Racer Seat for your Speed Twin 1200

The Café Racer single-seater seat gives your Speed Twin a fresh, sportier look. The finely crafted diamond pattern looks really smart.

Please note

The seat looks particularly good when paired with the original Triumph Café Racer seat cover. However, the cover is not included and must be ordered separately. You’ll find it listed below this description amongst the accessories.

Classicbike-Raisch tip

In addition to the seat, we also recommend our HeckWeck Kit to really bring out the look. This gives the rear end a nice, short and sleek appearance – just as a proper café racer should be. You’ll also find the kit listed under the accessories.

Classicbike-Raisch Comfort Tip

We’ve all been there – on long rides, we all end up with a sore bum at some point. That’s why we stock the SW-Motech comfort seat cushion. The cushion consists of lots of individual air chambers and is simply secured to the seat with two straps. You can use a valve to adjust how firm or soft you want your seat to be.
This cushion virtually solves the problem (I speak from personal experience – I spend two weeks every year on my bike from morning till night).
It’s also suitable for everyday use, for anyone who wants maximum comfort on their bike.
You’ll find the cushion below this description amongst the accessories.

Triumph LC ab 2016	Speed Twin 1200 EU 4 Speed Twin 1200 EU 5 Speed Twin 1200 EU 5 + Speed Twin 1200 RS

600

Accessories

HeckWeck Kit - Speed Twin 1200 CB11745M / RS-2

Short tail for Triumph Speed Twin 1200 With this rear end, the Speed Twin looks much sportier and lives up to its name. The rear is made a little shorter by removing the mudguard. This makes the rear end look really crisp! Indicator brackets: These must be ordered separately. You will find two different indicator holders below the description.Vario indicator holder: The indicators are attached directly to the licence plate with the Vario indicator holders (the width of the indicator holders can be adjusted so that every indicator sits in the perfect position for every licence plate width).This version is legal & StvO compliant. Indicator holder strut:The turn signals are mounted on the inside of the strut using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far to the rear). The kit consists of: An aluminium lower shell (serves as a splash guard in the rear & as a holder for electronic components under the seat), an aluminium number plate holder (both black powder-coated), an LED number plate light (with E-number, holes on the number plate holder are already present), all cables, plugs & screws required for installation (a plug that fits into the original wiring harness is included), as well as very detailed step-by-step installation instructions. As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one indicator).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal.With the kit in combination with the 3-1 indicators, the rear is completely clear and the licence plate is perfectly flush with the seat (no central rear light is required). If you don't feel like wiring, crimping and soldering the enclosed cables and plugs, you can also order this service (accessory item HeckWeck Kit / LC under the 3-1 indicators).In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness. Even inexperienced screwdrivers can carry out the conversion without any problems (as the installation instructions are very detailed). Resistors are not necessary as the flashing frequency can be set via the menu. You will find suitable indicators for the front below this description. If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LCunder the 3-1indicators). We also recommend ordering our licence plate screw set for a nice installation (accessory article HeckWeck Kit / LC under the 3-1 indicators).

From €199.00*

Details

Cafe Racer seat cap / hump - Speed Twin 1200 CB12875 / RS600

Seat cover for the Cafe Racer seat of the Triumph Speed Twin 1200 The Triumph cap fits plug & play on the Cafe Racer seat (you can find the seat under accessories in this product description). The cap is secured under the seat with two screws and can be fitted in a few simple steps. The cap is available in all original Triumph colours.

From €216.00*

Details

Cafe Racer seat cap / hump - Thruxton 1200 CB13047 / RS600

Seat cover for the Cafe Racer seat and original seat of the Triumph Thruxton 1200 / R / RS This original Triumph cap fits plug & play on the original 1 man or accessory seat from Triumph. The cap is secured under the seat with two screws and can be fitted in a few simple steps. The cap is available in all original Triumph colours.

€318.00*

Details

SW-Motech Comfort Seat Cushion CB11977M / RS5

The optimal companion for comfortable sitting!Who does not know it on long tours? At some point, the backside simply hurts. With this seat cushion, which consists of many individual air chambers, the problem is solved. The cushion can be inflated to different degrees of hardness depending on your needs.It is also perfectly suited for bikes that have extremely narrow and not very comfortable benches for optical reasons.Enjoy long tours to the finish: the TRAVELLER comfort cushion with an air cushion made of durable polyurethane relieves the back and buttocks. The comfortable, vibration-absorbing bench seat supports good circulation and prevents painful pressure points. In addition, the air honeycombs and the breathable spacer fabric reduce heat and perspiration.A non-slip underside and the circumferential retaining straps guarantee the safe positioning of the seat cushion. The bi-elastic, robust imitation leather surface provides special seating comfort. An integrated valve allows the air volume to be varied for greater comfort or a more intensive ride feeling on winding mountain tours. Relief for back and buttocks Prevents numbness and painful pressure points Reduces heat and perspiration due to the breathable spacer fabric of the cover and inner padding with interconnected air honeycombs Especially high vibration damping Integrated valve allows variable air filling Two sturdy straps with ROK straps and anti-slip underside for precise positioning Theft protection by fixing under the seat Surface made of robust, bi-elastic artificial leather for special seating comfort Waterproof interior: Air cushion made of polyurethane dimensions: Small: 22,0 x 30,0 cm Medium: 30,5 x 30,0 cm Large: 33,5 x 38,0 cm

From €89.99*

Details

Cafe Racer Seat - Speed Twin 1200

Product information "Cafe Racer Seat - Speed Twin 1200"

Triumph Genuine Accessories Café Racer Seat for your Speed Twin 1200

Stellen Sie eine Frage