HKS chain cleaner / neutralizer

2-component cleaner Consisting of cleaner spray and neutralizer spray.

HKS-R creates optimum conditions for the initial application of HKS extreme. HKS-R was developed at the request of many customers so that the lubricating effect of HKS lubrication products starts immediately. To ensure optimum chain cleaning, a 2-component solution is required. Not only the external dirt must be removed before lubrication, but also the chain-destroying dirt from the chain interior, which could creep in, for example, after fatigue of the sealing rings.

Only after careful cleaning with HKS-R CLEANER and application of HKS-R NEUTRALIZER can a new lubricating film penetrate, e.g. to the highly loaded chain pins. It is important that the cleaning agent is completely removed so that the lubricating film to be applied afterwards can adhere optimally.

After treatment with HKS-R, the penetration of lubricants, e.g. of HKS extreme, into the chain interior to the highly loaded chain pins is absolutely ensured. Due to the sealing effect of HKS extreme, no more dirt can get into the chain inner life.

Component 1: HKS-R CLEANER
HKS-R cleaner gently removes extreme dirt and grease from chain and rim in just a few minutes
HKS-R cleaner cleans even between the smallest cavities
HKS-R cleaner does not attack O-W-X ring, is acid-free
HKS-R cleaner restores the shine of the rims, also for chrome rims

Component 2: HKS-R NEUTRALIZER
HKS-R Neutralizer rinses off the loosened dirt and the like
HKS-R Neutralizer neutralizes the cleaner
HKS-R Neutralizer causes a short-time O-W-X-ring shrinkage, so that the chain-destroying dirt can also be removed from the inside of the chain.
the chain-destroying dirt is also transported out of the inner workings of the chain
HKS-R Neutralizer allows the lubricant to be applied subsequently due to the short-term state of
of the O-W-X-ring shrinkage, the lubricant to be applied can also optimally reach the inner life of the chain, e.g. the highly loaded chain pins.
HKS-R neutralizer ensures optimum durability of lubricants to be applied
HKS-R neutralizer does not attack O/W/X-rings, is acid-free
HKS-R Neutralizer restores the shine of the rims, also for chrome rims

Package size:
1 set HKS-R consisting of
each 300 ml spray CLEANER
each 300 ml spray NEUTRALIZER

Application chain and rim cleaning

Instructions for use

HKS-R high performance chain and rim special cleaner

2-components: Cleaner Spray and Neutalizer Spray

2 spray cans á 300 ml Quick and easy handling with double effect!

Step 1:
Jack up the machine on the main stand or free the rear wheel. To avoid contamination of the stand surface, use newspaper or a drip pan.

Step 2:
Application Component 1
HKS-R CLEANER
Cleaning and preparation for perfect chain lubrication!
Start at the chain wheel in the middle of the chain wrap and spray the chain or dirty rim thoroughly with component HKS-R REINIGER and allow to act. Then wipe chain or rim with a cloth or brush. Repeat process until all foreign matter has been removed.

Step 3:
Application Component 2
HKS-R NEUTRALIZER
Start at the chain wheel in the middle of the chain wrap and spray the chain or dirty rim thoroughly with component HKS-R NEUTRALIZER and allow to act. The chain will now be absolutely clean from the outside and inside. After approx. 3-5 minutes (when the white coating has evaporated and the chain has regained its normal appearance), apply chain lubricant e.g. HKS extreme high performance chain lubricant. The sealing rings are in the state of shrinkage, so that the lubricant also reaches completely into the inner life of the chain, to the highly loaded chain pins. After another 3-5 minutes the sealing rings regain their normal condition.

HKS-R creates optimal conditions for the initial application of HKS extremely high-performance chain lubricant.