Heck Weck Kit

keine Angabe

€169.00*

Prices incl. VAT plus shipping costs

Version

Zubehörartikel

Motogadget Mo.Blaze Tens 1 & 4 Indicator

from €59.00*

Kellermann Micro

from €69.95*

Rizoma LEGGERA indicators

from €80.00*

Kellermann Atto indicator

from €59.95*

Kellermann Bullet Turn Signals

from €109.95*

Rizoma IRIDE indicators

from €72.00*

Rizoma CLUB indicators

from €82.00*

item number:	211257222.1
Shop-number:	CB00468

Product information "Heck Weck Kit"

Raisch rear wake kit for Triumph Bonneville, Thruxton & Scrambler.
With this kit the bike gets a completely clean rear. Without the big original rear fender and without the original rear traffic lights made of plastic.
The most minimalistic and elegant rear kit available on the market for these motorcycles!

Due to the rear under fairing (aluminum lower plate) there is a good splash protection. A LED license plate light with E-number is also included. License plate holder as well as subplate are precisely laser cut from aluminum in Germany & black powder coated.
It also comes with a plug that fits into the original wiring harness. That is, only turn signals, lights, etc. must be crimped and can then be connected without having to change anything in the wiring harness.
All other cables, connectors, screws, etc. that are needed for installation are of course also included.

Since the HeckWeck kit does NOT have a central tail light, it is mandatory to have 3in1 turn signals (these combine turn, tail & brake light in one turn signal).
Further down in this description you can order the turn signals in a set and get 10% discount on the turn signals.
All turn signals listed here are with E-number and street legal.

If you don't want to wire and crimp the enclosed cables, plugs & insulations by yourself, you can order this service as well (you can add it to the set below).

The Kit is available in 2 versions

Version 1: The turn signals are mounted with a retaining plate from the inside of the strut. When the ignition is off you almost think at the motorcycle are no turn signals on it (but you see them well enough when they light up. Is not so Stvo compliant, because the turn signals are too far in the rear.

Version 2: The turn signals are mounted directly on the license plate holder (turn signal holder are with the license plate holder). Legal and StvO compliant.

To have the kit 100% legal, a reflector must still be attached to the license plate (you can also find it below & add it to your kit).

Matching / same turn signals for front you will find at the very end of this description under the accessories.

Models Triumph AC until 2015:	Bonneville SE Gussrad Bonneville T100 EFI Bonneville T100 Vergaser Scrambler EFI Scrambler Vergaser Thruxton 900 EFI Thruxton Vergaser

Downloads "Heck Weck Kit"

Download Heck-Weck-Kit-Montage-DE-EN

Triumph AC bis 2015	Bonneville SE Gussrad Bonneville T100 EFI Bonneville T100 Vergaser Scrambler EFI Scrambler Vergaser Thruxton 900 EFI Thruxton Vergaser

-1

Choose from the following articles in the article group: Blinker/Rücklicht Kombinationen - Indicator/Rear Light Combinaions optional

0 / 1 chosen

Pico LED 3-1 tail light / indicator combination

Available, delivery time: 1-3 days

€143.96*

% €159.95* (10% saved)

2x Motogadget Mo.Blaze Tens 3 Indicator/Rearlight

Colour: Black

Available, delivery time: 1-3 days

€89.10*

% €99.00* (10% saved)

2x Rizoma IRIDE taillight / turn signal

Colour: Black

Available, delivery time: 1-3 days

€94.50*

% €105.00* (10% saved)

Rizoma LEGGERA S rear light/indicator

Colour: Black

Available, delivery time: 1-3 days

€170.10*

% €189.00* (10% saved)

Rizoma CLUB S rear light/indicator

Colour: Black

Available, delivery time: 1-3 days

€170.10*

% €189.00* (10% saved)

2x Kellermann Atto Indicators

Available, delivery time: 1-3 days

€89.96*

% €99.95* (9.99% saved)

2x Kellermann Bullet tail light/indicator combination

Colour: Black

Available, delivery time: 1-3 days

€98.96*

% €109.95* (10% saved)

Choose from the following articles in the article group: Zubehör Artikel HeckWeck Kit / AC optional

0 / 99 chosen

License plate screw set

These screws are powder coated in the matching colors (white / blue / black) for the license plate. We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst. Delivery: 1x screw M5x20 blue 2x screw M5x20 black 3x screw M5x20 white 4x self-locking nut M5 4x washer M5 DIN9021 The advantages of powder-coated screws: - Mechanically resilient - Corrosion resistant - Weather resistant - Environmentally friendly

Available, delivery time: 1-3 days

€8.90*

Reflector

Reflector with holder. Ugly but mandatory. Only for the TUEV demonstration.

Available, delivery time: 1-3 days

€10.90*

Cabling Heckweck

Wiring complete by Classicbike Raisch as service! Wiring harness for rear wake-up kit. If you do not believe the soldering of cables, pressing of plug-in sleeves, etc., or simply do not feel like it, we offer this as a service. The complete wiring harness has only to be plugged together with the winker, license plate and original cable harness. Plug & Play solution.

Available, delivery time: 1-3 days

€34.95*

Total bundle price for current configuration

€169.00 ... *

Prices incl. VAT plus shipping costs

Zubehörartikel

Motogadget Mo.Blaze Tens 1 & 4 Indicator CB12070.2M / RS0

The new Motogadget mo.blaze tens1 & 4 are currently the smallest road legal turn signals in the world. Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they stand out as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC milled and available in black anodized or mirror polished finish. In addition, the turn signal is optionally available as a normal turn signal and as a version with position light. The turn signals with position light are ONLY suitable for the front. These shine permanently white and ensure that you are better seen when driving behind. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1 Watt

From €59.00*

Details

Kellermann Micro CB11162M / RS600

Kellermann micro LED indicators in black. As usual from Kellermann in the highest quality. The indicators are available as simple indicators and as an indicator/rear light combination. In the indicator/rear light combination, the rear light, indicator and brake light are integrated into the indicator. Both versions naturally have an E number. The price is for one indicator. Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €69.95*

Details

Rizoma LEGGERA indicators CB11274.2M / RS0

Rizoma "LEGGERA" mini indicators made of billet aluminium in top quality. Minimalist indicators for anyone who wants them to be as inconspicuous as possible, but does not want to compromise on safety and an elegant finish. The indicators shine very brightly thanks to modern LED technology. The indicators have an E number. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with white position light (only for the front!) or without. Silver indicators: sold individuallyBlack indicators: sold as a pair Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessories in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €80.00*

Details

Kellermann Atto indicator CB11500M / RS2

Kellermann Atto indicator in Clear & Dark version Kellermann Atto, the smallest indicator available on the market! And with an E number (i.e. legal for front & rear)! Perfect for anyone who simply wants the indicators to be as inconspicuous as possible on the motorbike.Especially in combination with the Atto rear light, you can achieve an incredibly clean look at the rear. (You can find the rear light under accessories in this description). In the second picture we have installed the Atto indicator on the handlebar fitting. This works with all Triumph models that have a 1 inch fitting with a hole for mirror mounting. To do this, the motorbike must be converted to handlebar end mirrors (if not already fitted ex works, e.g. the Bobber), an indicator extension must be ordered and a black washer must be fitted on top (you can get this from us). An indicator has never been smaller. For comparison: the light surface of the Atto®/Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorbike. With the Atto®/Atto® Dark, the "indicator" component on the motorbike can virtually disappear visually. This indicator is only noticeable when it really needs to be.When it does flash, it shines with an intensity that has made Kellermann products legendary and the company a trendsetter time and time again. The Atto®/Atto® Dark offers maximum luminosity with minimum size, in short: it is "sensationally small - spectacularly bright". We recommend not looking directly into the light of this small power station for too long!Optimised light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology**, the new Extranz - Extreme Optical Transparency Technology is used here for the first time, which makes this combination possible. As the Atto indicators only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, a suitable adapter is available for this (see accessories article in this description) The price is for one indicator Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €59.95*

Details

Kellermann Bullet Turn Signals CB10574M / RS2

Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50mm. Flowing forms and perfect transitions. The view remains on this blinker and glides along at the same time. The prices are per piece. Suitable flasher for connection to the original wiring harness.

From €109.95*

Details

Rizoma IRIDE indicators CB11270M / RS0

Beautiful, classic indicators made of billet aluminium from Rizoma in the very highest top quality. The indicators shine very brightly thanks to modern LED technology. The indicators are E-marked. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with a white position light (only for the front!) or without. The indicators are sold individually (except for black without position light, which come as a pair) Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you will find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €72.00*

Details

Rizoma CLUB indicators CB11272M / RS0

Rizoma "CLUB" mini indicators made of billet aluminium in the very highest top quality. That's what we Modern Classic fans want! Modern small indicators in a classic round design.The indicators shine very brightly thanks to modern LED technology and are therefore very easy to see despite their small size. The indicators have an E number and are therefore road legal. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with a white position light (only for the front!) or without. A resistor is included in the scope of delivery. Chrome indicators are sold individually Schwarez indicators are sold as Pairs Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturer with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you will find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €82.00*

Details

Current selection:

Prices incl. VAT plus shipping costs

Total bundle price for current configuration

€169.00 ... *

Prices incl. VAT plus shipping costs