DB-Killer Zard 400er extension
€65.00*
Available, delivery time: 1-3 days
Zubehörartikel
from €930.00*
from €1,289.00*
from €980.00*
from €1,054.00*
from €1,006.00*
€64.90*
| item number: | 211257543 |
| Shop-number: | CB11514 |
Product information "DB-Killer Zard 400er extension"
To use the DB-Killer on the Zard exhaust system, a fine welding spot has to be drilled out and milled away. Afterwards the exhaust has to be reworked at the guide for the Segering.
If you don't want to do this work yourself, you can order it here, then the exhaust will be delivered with easily removable DB-killers (by snap ring).
| Triumph LC models from 2016: |
|
|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
|
|---|
0
0
0
0
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Zard Six Days Street Scrambler
CB11360M
/ RS0
€930.00*
Zard 2-2 High exhaust system with E-number for Triumph Street Scrambler.
With E-number for Euro 4 & Euro 5 models.
The exhaust gives the scrambler a whole new look. The two very very chunky original dampers are replaced by the short and crisp Zard stainless steel dampers. Also the sound is great! Really nice dull. Click here for the Soundcheck
The exhaust is equipped with removable DB-killers for all who would like the sound to be even more nimble.In order to remove the DB-Killer from the exhaust system, a welding spot that is difficult to access must be drilled out and milled away.If you want to have this done, you have to order the additional article DB-Killer Zard Exhaust CB11514 (see accessories in this description).
The exhaust is available as a road version (with EC approval) and as a racing version (without EC approval). Due to the low interest we do not have the racing system in stock (delivery time on request).
Black: The complete exhaust system is supplied with a black ceramic coating.
There are special Racing DB-killers developed by us for the exhaust for more sound than series and also more performance (because the original DB-killer is quite closed). For the sound you want. See accessories in this item description.For Swiss customers, the exhaust can be delivered with a declaration of suitability.
Zard Short - Bonneville
CB11368M
/ RS0
€1,289.00*
Zard Short exhaust system for Triumph Bonneville T100 / T120.With E-number / street legal.
ATTENTION! The system is not approved for the T100 Euro 4 models. However, it is still supplied with an E-number for the T120.
General description of the Zard exhaust system
The Zard Short and the Slim 2-2 rear silencers have a nice muffled and full sound.
The DB-Eater can be dismantled.
All materials necessary for assembly are included in the scope of delivery.
The EC-approved rear silencers have an engraved E-number and do not need to be entered in the vehicle documents.
The sound is simply awesome! See for yourself (see video at the end of the description. The video shows a 900cc T100)
Note on the DB killers (removal & racing DB killers)To remove the DB-killer on the exhaust system, a difficult to reach spot weld has to be drilled out and milled away. The removal takes about 45 minutes of work in total.If you want us to do this, you have to order the additional item DB-killer removal Zard exhaust CB11514 (see accessories in this description).
Racing DB-killer for more sound:We have developed a special racing DB-killer for the exhaust for more sound than the series and also more power (since the original DB-killer is quite closed). For the sound you want. See accessories in this item description.
For Swiss customers, the exhausts can be delivered with a declaration of suitability.
Description for the Bonneville Euro 4 modelscomplete systemFor the Euro 4 models, the Zard exhaust system is a complete system including new manifolds.Weight saving:Between 8.9 - 9.9 kg depending on version
2 versions/lengths available- Short: The short version is the really short version- Slim: The slim version is the slightly longer version - if you order this version, you can fit the exhaust in both the long and short version.
Description of the Bonneville Euro 5 modelsSlip On ExhaustThe Zard Slim Euro 5 variant is a slip-on silencer. Weight saving:Original exhaust: 14.3 kgZard exhaust: 4.4 kg Versions- Slim: Officially and plug & play, only the longer Slim version is available for the Euro 5 models.- Short: If you absolutely want to install the short version on your Euro 5 Bonneville, you can order the Euro 4 short version. However, something has to be changed on the cat for this. If you are interested in this, please contact us personally. - Short complete system: The exhaust system is also available as a complete short version exhaust system. However, this is the racing version without approval. If you are interested, please contact us.
Zard Exhaust Scrambler 1200
CB11746M
/ RS0
€980.00*
Zard 2-2 slip-on stainless steel exhaust for Triumph Scrambler 1200 XC & XE with E-number (for both the EU 4 and EU 5 models).
The two rear silencers are positioned very close together in order to achieve the slimmest possible line. The large openings created by the slash cut on the end caps make the rear of the bike look even beefier and emphasize the off-road look of the Scrambler.The heat protection plate from the original exhaust system is retained. The accessory heat protection plate, which you can see in two product photos, can be found under the accessory items in this description.
The exhaust also delivers slightly more power than the standard system (see pictures for power curve).
The sound of the Scrambler is already audibly better and throatier with the exhaust, but in our ears it doesn't have the desired AHA effect that you would hope for. Sound video with original DB killers see below.We recommend people who like it a bit throatier and louder to order our additional Zard Racing DB-Killer (see accessories article in this description without road approval).In order to be able to remove the original DB-Killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away (takes a little more than half an hour). If you want to have this done, you must order the additional item DB-Killer removal Zard exhaust CB11514 (see accessories in this description).If the sound is still not enough for you, you will then have to install the H-pipe (cat replacement pipe).
The exhaust system is available either with E-number or as a racing version (without E-number). The end caps are also available in stainless steel (same design as the rest of the exhaust) or carbon fiber (surcharge).
ACHTUNG bei den Scrambler 2024 Modellen. Bei diesen Modellen passt die Auspuffanlage NICHT!
For Swiss customers, the exhausts can be supplied with a declaration of suitability.
Zard Street Twin Low
CB11096M
/ RS600
€1,054.00*
The Zard Short exhaust system for the Street Twin / Street Cup is probably the shortest exhaust on the market. It runs directly under the engine and ensures that the entire rear wheel remains clear.
Completely made of stainless steel with ABE (road approval), it fits on the original manifold and is a plug & play replacement for the original rear silencer.
The Zard Short exhaust is a visually very nice short & crisp exhaust in a classic design that fits perfectly to the Street Twin / Cup. In terms of sound, the Zard exhaust system gives you a beautifully rich and muffled sound. The workmanship of the exhaust system is very high quality in the classic Zard manner.
In order to be able to remove the DB-Killer from the exhaust system, a welding point that is difficult to access must be drilled out and milled away. As this takes about half an hour of work, we have to charge extra for this.If you would like to have this done, you must order the additional item "DB-Killer removal Zard exhaust CB11514" (see accessories in this description)
There are special racing DB-killers developed by us for the exhaust for more sound than standard and also more power (as the original DB-killer is quite closed). For the sound you want. See accessories in this article description.
For Swiss customers, the exhausts can be supplied with a declaration of suitability.
Zard Short - Bobber / SpeedM
CB11362M
/ RS0
€1,006.00*
Zard stainless steel exhaust for Triumph Bonneville Bobber & Speedmaster. Due to its short design, the exhaust gives the Bobber a very different and cool look, because the whole rear wheel is free.
With E-number for Euro 4 & Euro 5 models.Note for the Speedmaster 1200: The exhaust system also fits the Speedmaster, but is not homologated for it.
Nice muffled sound, convince yourself (see video at the end of the description). If the sound is not enough, you can remove or modify the removable DB-killer. In addition, there is still the possibility to install X-pipes cat replacement). So that one comes to a sound, as one wishes him from a Bobber.To be able to remove the DB-killer on the exhaust system, a hard to reach welding spot has to be drilled out and milled away.If you want to have this done, you have to order the additional article DB-killer removal Zard exhaust CB11514 in addition (see accessories in this description).
Completely made of stainless steel with or without ABE. Fits so to the original manifold.
There are special racing DB killer developed by us for the exhaust for more sound than series and also more power (because the original DB killer is quite to). For a sound as you want it. See accessories in this item description.
For Swiss customers the exhausts can be delivered with declaration of suitability.
Zard racing DB-Killer
CB11523
/ RS1
€64.90*
Raisch racing DB Killer for Zard short exhaust systems. More sound + more performance through more throughput. Approx. 40% larger hole. With our DB Killer there are now 3 sound variants available for the Zard systems. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.To be honest, with the original DB-killers you only get a very small sound compared to the standard version. Since most of them do not want to drive without DB-killers, we have made this more open variant. It looks like you have a legal DB-killer in it, but it sounds really good! With these db-killers the Zard systems get the sound they need.