Underbar mirror kit (consisting of 1x mirror 1x underbar adapter) suitable for all R9T models with original handlebars as well as some accessory handlebars (except R9T Racer). With E-number / road legal. These mirrors provide a really flat & cool line above the handlebars, because with these mirrors there is nothing more. An extremely cool style, as the mirrors are hardly noticeable. Because of the adjustable bend joint on the mirrors, these can run nice and flat and straight under the handlebars. Nevertheless, you have a very good view to the rear (better than in most normal mirrors, which are mounted on top), because you no longer have to look at the shoulders, but only past the waist. Looks very good on both the on a scrambler and a sporty conversion! Included is a mirrorless Motogadget mirror with E-number (exactly mirror description see below) as well as a new CNC machined mirror adapter, which does not build up as high as the original.For the mirrors are 3 different versions to choose from.For the adapters are 2 different versions to choose from (Standard: simple black aluminum adapters / CNC-Milled: elaborate, CNC-milled adapters in matte black anodized with milled BMW logo).Here you can find the CNC adapter, if you want to have more information about it. Photos of the two adapters can also be seen below the pictures (you just have to change the version in the selection to see the different adapters). When mounting the mirrors you have to be a little careful, because they have to be adjusted to fit exactly, so that you have visibility to the rear, but the mirror does not come to the tank when turning the handlebars.   About the mirrorless mirrors:These new and beautiful Motogadget mirrors have a whole new mirror technology! They come completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly on the metal of the body. The aluminum itself is the mirror surface! This allows for a weightless design with no rim or frame, and the mirror body itself becomes extremely thin and light. Broken glass or glass that falls out is simply not possible! A new mirror design, which is looking for its equal on the market, but will not find! These mirrors are really an absolute highlight on any motorcycle!

The Flat-Style mirrors for the R9T provide really nice flat look on your R9T! Not everyone likes handlebar end mirrors, but almost no one likes far out and up mirrors that look like mouse ears. So we came up with a mirror kit where the mirrors sit as flat as possible and directly on the mirror mount. At first glance, you think, how are you supposed to see anything in that mirror? That's what we thought, too. However, you can see really well in the mirrors, because you don't look past your shoulder, but through your armpits. Adjusted to the driver, the view to the rear is really reasonable. Of course, you can not now expect a view like a huge original mirror, but the view is clearly better than some other small mirrors, where you only look in front of the shoulder. Mirror housing as well as the adapter are made of aluminum. The mirrors are with E-number! The price is for a mirror including adapter, instructions & mounting hardware. MIttlerweile we use for the kit a higher quality LSL mirror, which has a very noble, glass bead blasted & anodized surface (see mirror detail pictures). On the installed photos is still another mirror installed (which is identical in shape, but does not have such a noble surface and is not from LSL).

Motogadget M.View Sport mirror (street legal!) in a sporty angular design, as the name already says. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread. The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles, the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the play arms you see below in the details and on a photo. These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars. Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror. DimensionsWidth of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: standard: 150 mm / XL: 180mm The size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.

Motogadget M.View Club mirror (street legal!) in a classic oval design. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread. The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles, the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the play arms you see below in the details and on a photo. These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars. Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror. DimensionsWidth of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: standard: 150 mm / XL: 180mm The size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece. 

Motogadget M.View Classic Mirror (street legal!) i classic round design paired with latest and most modern technology. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread. The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the game arms you see below in the details and on a photo. These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface!  Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars. Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror. DimensionsDiameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmMirror arm length: 150 mmThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece. 

Motogadget M.View Race mirror (street legal with ECE!) in an angular design for all who like it sporty towards racers, as the name already says. Suitable for any normal mirror mount with thread. In the scope of supply different threads are contained (1x screw M10x1,5, 1x screw M10x1,25 right thread, 1x screw M10x1,25 left thread), in order to be able to mount the mirror also at each Bike, which has a mirror thread.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without a mirror thread (like e.g. a Triumph Bonneville T100), you will find suitable adapters for your motorcycle in the category "Mirrors: Accessories, holders & adapters". If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This makes it possible to mount the mirrors on the handlebars both upwards and downwards. Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description). DimensionsWidth of mirror body: 129 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: 150 mmWeight: 175 gThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE mark. Therefore it is suitable for all vehicles without registration.Price per piece.

Rizoma One Mirror With E-number. The mirror is made of very high quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milling structure. You can see and see at a glance the high quality of these mirrors. The One Mirror is the classic from the Rizoma range. He impresses you with his absolutely californian and round shape with a nice filigree arm. For mounting on the original seat of the R9T models, we have the mirror mount Riz mirror adapter One BMW (see accessories in this article). The price is for one mirror.

Rizoma Radial RS Mirror With E-number. The mirror is made of very high quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milling structure. You can see and see at a glance the high quality of these mirrors. Due to the ingenious fastening system the Rizoma uses here, the mirror does not stand as far up and becomes like mouse tubes. It runs smoothly over the handlebar. The shape is a beautiful classic drop shape shape. For mounting on the original seat of the R9T models we need the mirror mount Riz mirror adapter RadialRS + Dynamic BMW (see accessories in this article).

Rizoma Dynamic mirror in minimalist design . The mirror is made of very high quality billet aluminum in a 3D process. Who knows the brand and the parts of Rizoma, knows the high quality of the mirrors. Due to the ingenious fastening system the Rizoma uses here, the mirror does not stand as far up and becomes like mouse tubes. It runs smoothly over the handlebar. The mirror is beautifully small in a retro style. Due to the additional flat mounting the mirror falls only minimally. For mounting on the original seat of the R9T models we need the mirror mount Riz mirror adapter RadialRS + Dynamic BMW (see accessories in this article).

Flat style mirror. Completely made of aluminum in matt black. So a mirror should look at the motorcycle, and do not stand up like donkey ears. Suitable for right and left. The mirror has no E number, but is large enough to ensure good consideration. Mirror adapter kit 130 SAB3 is required

A classically beautiful simple mirror at a really fair price. Is made of milled aluminium, glass bead blasted, therefore great matt finish. Really not too big and with E-mark. Price per piece.Included in delivery are 2 different adapters, with which the mirrors can be mounted in every mounting.Because of the joint in the mirror, the mirror can run nice and flat over the handlebars. Looks optically very nice, because many other round mirrors stand out very high and look from the front like mouse ears.Model specific mounting instructions:Bonneville LC, Bobber, Speedmaster, Scrambler 1200:These models do not have a mirror thread ex works, but simply a hole in the fitting. In addition, this hole is very far inside, which means that when mounting accessory mirrors without a widening, you can hardly see anything to the rear. Therefore you have to order the article "Mirror mount + widening fittings without thread LC" (see accessories in this description) for mounting & for a better view.Bonneville AC + Thruxton EFI / AC:For these two motorcycles an additional adapter is needed, because you have only one mirror hole in the original fitting (see accessories in this description)

Rizoma Namic mirror with E-number. Probably the highest quality and most elegant mirrors in our range. The mirror is made from very high-quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milled structure. You can see and feel the high quality of these mirrors at first glance. Thanks to the ingenious mounting system that Rizoma uses here, the mirror does not protrude so far upwards and look like mouse ears. It runs nice and flat over the handlebars. The shape is a beautifully classic teardrop shape. The mirrors are sold individually. Model specific mounting instructions: An additional adapter is required for all models. BMW motorcycles:The Riz mirror adapter RadialRS + Dynamic BMW is required for mounting on the original mount of BMW models (see accessories in this article). Water-cooled Triumph LC models: An additional, model-specific adapter is required to mount the mirror (see accessories article in this description). 1. adapter "Riz mirror adapter for fittings with hole", which is suitable for all models that have a hole in the fitting ex works for the mirror mount 2. adapter "Riz mirror adapter for fittings with thread", which is suitable for all models that have a thread for mirror mounting on their fittings ex worksThruxton 1200 R / RS - Speed Twin 1200 - Scrambler 1200: These models do not have a mirror mount ex works. In addition to the adapter 2, the adapter mirror adapter "Thruxton R / Speed Twin / Scrambler" is also required Air-cooled Triumph AC models: The "Riz mirror adapter for fittings with hole" adapter is required for all AC models.

Ein Paar klassische Aluminium Spiegel aus dem Hause LSL.  Die LSL Classic Spiegel kombinieren ein klassisches, rundes Design mit moderner Technik und Verarbeitungsqualität. Das Spiegelgehäuse ist mit knapp 10mm schön flach, aber auch nicht zu flach, weil zu einem klassischem Umbau ein Spiegel auch nicht zwingend maximal flach seien muss.Spiegelgehäuse und Spiegelarm sind in einer schönen, matten Oberfläche (wird durch Glasperlen strahlen erreicht) hergestellt.  Der Spiegelarm hat an der Verschraubung eine sehr praktische Winkel Verstellung eingebaut, das es ermöglicht den Spiegel individuell im Winkel einstellen zu können.Für die Optik ist das ein wichtiges Detail, denn so stehen die Spiegel nicht so weit nach oben ab (was sonst schnell aussieht wie Mickymaus Öhrchen).  ACHTUNG, für manche Modelle werden Modell spezifische Adapter benötigt (einige sind unter den Zubehörartikeln dieser Beschreibung zugeordnet), wenn ihr euch nicht sicher seid, ob ihr welche benötigt oder nicht, ruft uns einfach an wir helfen gerne weiter.    Maße: A/B Breite Kopf: 102 mm C Gesamtbreite: 180 mm D Gesamthöhe: 170 mm Stiellänge: 100 mm bis zum Knick, dann 100 mm bis zum Gelenk Gewicht: 210 g Lieferumfang: 1 Paar inkl., 2x M10x 1.25mm Rechtsgewindeadapter 1x M10x 1.25mm Linksgewindeadapter