Motone luggage rack for the Triumph Bobber mudguard. Made of stainless steel, optionally polished or black powder coated. The practical luggage rack is screwed onto the mudguard of your Bobber. Mounting material and rubbers are included. The carrier has various fastening options that make it easy to attach luggage.

Hepco & Becker steel tube luggage rack for the Triumph Bobber and Bobber Black. As there is no way to store any luggage on the Bobber in its original condition, this luggage rack is really more than practical if you are going on a longer tour.Perfect for lashing down a luggage roll, for example.Thanks to its solid look and shape, it fits the Bobber very well and can also remain mounted outside of tours. If you want to go on a really long tour and need to carry even more luggage, we also recommend the luggage rack for the mudguard (see accessories in this description). Approximate dimensions of the luggage rack: 22cm width / 19cm lengthLoad recommendation (the manufacturer specifies 5kg here. However, the manufacturers of luggage racks always play it extremely safe here to avoid any warranty claims. Our experience & that of our customers shows that you can load significantly more without any concerns. More packing space: Only the luggage carrier itself is quite small in terms of the luggage support surface & you can't attach luggage to the tubes very well either.If you're not just riding the rack for visual reasons, but really want to take a large rear pannier with you and attach it securely, we recommend the additional plate (see accessories below the product description).

This small Motone pannier rack made of 300 stainless steel is the perfect pannier rack for carrying small items. If you need a rack for longer tours, we recommend the BIG version (see similar articles). The Motone rack is quite solid and of high quality (much more valuable than many other racks on the market). It is also very well thought out. It also has a second strut that serves as a grab rail for the passenger. In addition, a strap is welded to the left and right underneath the carrier to make it easier to lash luggage. ATTENTION: Does not fit with the Bonneville T100 & T120 original seat. The carrier fits with all accessory seat benches (except the Triumph comfort seat bench). More packing space: Only the luggage carrier itself is quite small in terms of the luggage support surface & the tubes are not particularly good for attaching luggage.If you are not just riding the carrier for visual reasons, but would really like to take a large rear bag with you and securely attach it, we recommend the additional plate (see accessories below the product description).

This large Motone luggage rack made of 300 stainless steel is the perfect rack when you are travelling and have to carry a lot of things. If you usually only have to take small things with you and would rather have a more inconspicuous carrier, we recommend the SMALL version (see similar articles). The Motone rack is quite solid and of high quality (much better than many other racks you can buy). It is also very well thought out. It also has a second strut that serves as a grab rail for the passenger. In addition, a lug is welded to the left and right underneath the carrier for better lashing of the luggage. The Big version of the carrier, in addition to the attachments under the seat, is also attached to the inside of the shock absorbers so that the carrier can carry more weight.   ATTENTION: Does not fit with the Bonneville T100 & T120 original seat. With all accessory seats (except the Triumph comfort seat) the carrier fits. 

Pair of universal spacers for all types of panniers from the accessories so that they cannot get into the spokes.Easy mounting on upper shock absorber mount and passenger footrest attachment.On the Bobber they are screwed to the inside of the frame.On the one hand the holders prevent bags from getting into the wheels, on the other hand bags can be attached to it (e.g. with a belt, cable ties or similar).The price is for one pair.For the Bonneville and Street models the holder is also available separately for the left side only (see accessories in this description).

SW-Motech V-LOC side carrier for water-cooled Triumph Modern Classc models and the Speed / Scrambler 400. Model special side bag carriers for the Legend Gear and WP V-LOC side bags Both bag systems can be found below the product description under accessories. Attention for Bonneville models:If you have NOT fitted the original mounting bracket, you must order the additional adapter "Adapter Bonneville LC SLC carrier without mounting bracket". This can be found under accessories in this description.If a flat seat (such as the Cool Seat, Viper) is also fitted, the bracket for Street Twin must be ordered. The precise, model-specific development of the V-LOC side supports allows simple and secure installation at the original mounting points on the vehicle. A magnetic quick-release system allows the Legend Gear side bags to be attached and removed in a single movement and also locked if required.Thanks to the magnetic system, the bags lock into the correct position immediately and audibly. The holders are supplied with vehicle-specific step-by-step assembly instructions. Optional accessories: Legend Gear / and water-tight WP side bags Aluminium side covers - for all those who don't want to have a bag on them and don't want to look at the holders. Universal bag adapter - This allows you to use the V-LOC holding system universally and attach the counterpart to any bag (with the appropriate dimensions). All items can be found below the product description under accessories. Flat, V-shaped carrier made from forged steel Plastic holder with integrated Fidlock® magnet system Model-specific connecting elements for a perfect fit Compatible with Legend Gear side bags and WP side bags Anti-theft device optionally available Scope of delivery 1 x V-LOC side carrier left Fitting instructions Mounting material

Legend Gear shoulder strap LA12 for rear bags The Legend Gear LA12 shoulder strap complements the retro luggage portfolio from SW-MOTECH. The shoulder strap with its timeless design makes it even easier to transport the large rear bags. With a total length of 2 metres, the shoulder strap can be flexibly adjusted. A reflective woven label increases visibility in road traffic. Thanks to the inner material made of 5 mm foam and the 3D mesh underside, the belt is comfortable to wear - ideal for everyday use, for example for transporting sports equipment or shopping. Its high-quality workmanship and robust construction make the LA12 shoulder strap a reliable everyday companion. Padded Legend Gear LA12 shoulder strap offers increased carrying comfort Retaining loops allow secure and flexible attachment of Legend Gear and PRO series bags Sturdy retaining hooks made from anodised aluminium Adjustable in length. Pad size: 350 x 70 x 15mm

Legend Gear shoulder strap LA4 The Legend Gear shoulder strap LA4 complements the retro luggage portfolio of SW-MOTECH. With the shoulder strap in a timeless design, saddle bags, tank bags and rear pockets of the Legend Gear series can easily be converted into a practical shoulder bag. In addition, all three accessory pockets can be attached to the shoulder strap (see accessories) Padded shoulder strap provides increased comfort Straps allow a secure and flexible attachment of additional pockets Sturdy holding hooks made of anodized aluminum Fits Legend Gear bags, saddlebags and tank bags The length of the shoulder strap can be varied between 90cm and 150cm via 2 belt adjusters Material: Durable Napalon artificial leather, polyamide strap, anodised aluminum Dimensions: 3.8 x 150 (90) cm (W / L). Delivery: Legend Gear shoulder strap LA4

This template has exactly the same dimensions as the screw connections of the SW-Motech SLC holders. So it is easy and fast to transfer the hole pattern perfectly to any bag to screw it to the stylish SW-Motech holders.

Luggage rack incl. passenger grab handles from Unit Garage in Italy. Suitable for Triumph Scramber 1200 / Speed Twin 400 / Scrambler 400 X Scrambler 1200:Suitable for the Unit Garage Top Case (see accessories in this description).The stainless steel luggage rack is at least as high quality and precise as the Triumph holder. The UG holder has the added advantage that it is available in both silver and black and that there is also a matching aluminium top case for it. The aluminium top case must be ordered separately. Maximum load according to the manufacturer: 10 kgSpeed Twin / Scrambler 400:According to the manufacturer, the luggage rack for the 400cc models has a maximum load capacity of 15kg.The aluminium plate included in the scope of delivery can be removed. If you want to mount a top case, you will need an extra mounting plate. Please contact us personally for further information. The required mounting material and assembly instructions are included in the scope of delivery for all models.

Unit Garage side bag bracket for all water cooled Triumph Modern Classic models. The Unit Garage bag holder is needed to mount a Unit Garage side bag. All Unit Garage side bags from our range fit to the holder. The UG bag holders are made in a nice minimalist way so that they are as unobtrusive as possible without the bag mounted on the bike.The bag system from Unit Garage is a very well thought out. The side bags are simply hooked into and unhooked from the holder with a flick of the wrist. In addition, a lock is integrated in all bags to protect the bags from theft when mounted. Included in delivery are all fastening materials, you are necessary for mounting. We would like to produce aluminum sheets that we have punched at certain points in addition to laser cutting and edging.Like your underguard, for example. Model special noteStreet Scrambler: The bracket on the right-hand side does NOT fit on the Scrambler. Only fits if a lower exhaust is fitted. Speed / Scram 400: Only fits on the exhaust side (right) if a short, low exhaust, such as the one from Unit Garage, is fitted.

Universal bag adapter that fits on various bags (e.g. the Oldschool luggage cases from our assortment) to attach them to the Legend Gear SLC holder. With it you can turn any bag into a modern motorcycle luggage system, which can be mounted on and off in a few seconds. A further advantage of this system is that the SLC holders are not so noticeable visually, so that they can also remain mounted on the motorcycle.Size of the adapter plate: 30 x 22 cm The matching Legend Gear SLC Side Pocket Carrier must be ordered separately & model specific (see accessories in this description). Easy attachment of the adapter plate to the eyelets on the back of the bag with four screws. Only one handle: quick-release system of the adapter plate guarantees secure hold of the bag on the holder Model-specific SLC side rails are available separately Comfortable opening of the quick-release fastener via a drawstring Adapter plate is optionally available for the left or right side Before the first use the quick-release fastener is mounted to the adapter plate and this to the bag. Mounting material + mounting instructions are included in the scope of delivery  

These universal bag holders are suitable for attaching any kind of bag.It is simply screwed under the seat on the frame and on the strut. Then you can attach any bag to it. ATTENTION for Bonneville models: For the Bonneville T100 / T120 fits this holder ONLY if a flatter Sitzbak is installed such as the Cool Seat / Viper Seat / Silverstone / VIntage Slim Seat / Street Twin seat etc..

SLC side carrier for water-cooled Triumph Modern Classc models and the Speed / Scrambler 400. Attention for Bonneville models: If you have NOT fitted the original retaining bracket, you must order the additional adapter "Bonneville LC SLC bracket adapter without retaining bracket". This can be found under accessories in this description.If a flat seat (such as the Cool Seat, Viper) is also fitted, the bracket for Street Twin must be ordered. Not all SLC holders are still availableThe SLC system from SW-Motech is being phased out! The brackets that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description. The precise, model-specific development of the SLC side carriers allows simple and secure mounting to the original mounting points on the vehicle. The Legend Gear side bags can be attached and removed in a few simple steps using a quick-release system, without the driver having to do without reliable bag fastening. Model-specific shape allows easy mounting on one or two sides, also suitable for bikes with overhead exhaust The SLC side carrier made of sturdy tubular steel guarantees secure attachment and removal of the Legend Gear side bags in a matter of seconds (see accessories) Material: Tubular steel Note The SLC side carrier is also compatible with the universal side mount for attaching all kinds of items. Tip: As an alternative to the SLC side carrier, for example for conversions and custom bikes, the universal Legend Gear SLS saddlebag holder is ideal. Scope of delivery 1 SLC side carrier Mounting material Not all SLC holders are still availableThe SLC system from SW-Motech is being phased out! The holders that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description.

Seat bar and luggage rack chrome-plated Bonnie - tubular steel seat bar for your passenger with integrated luggage rack for up to 3 kg weight. The original, attached seat bracket is required for mounting. Classicbike-Raisch recommendation: Alternatively, we recommend one of the two Motone luggage racks. They have a higher quality finish and are better thought out. You can find them under similar articles below this description.

Luggage bridge. High quality, prefabricated tubular steel luggage rack with seat bracket for your pillion and tie-down points for increased safety. Does NOT fit with the Triumph Bonneville T100 / T120 original & comfort seat. Fits with the Street Twin original seat and also all accessory seats (except Bonneville comfort). Classicbike-Raisch recommendation: Alternatively, we recommend one of the two Motone luggage carriers. They have a higher quality finish and are better thought out. You can find them under similar articles below this description.

A rain cover keeps your tankbag or luggage bag and its contents dry even in a strong downpour. The scope of delivery includes a bag with a logo for the compact storage of the cover in the tankbag when it is not needed. With transparent window for use with the cardboard bag of the tankbag

Luggage holder pair Very high quality (CNC milled + stainless steel screws) and extremely practical. Simply screw on to the upper spring support. With all screws

This aluminium luggage rack is fitted in place of the original Sizus seat cushion. Installation is very simple with 3 screws. The bridge gives the rear of the Scrambler a much nicer look and is also practical if you want to put some luggage on the back. The part can also be coated black at the customer's request. Please contact us for this.

Triumph original luggage carrier with passenger handles, made of pressed aluminium, suitable for Triumph Scrambler 1200 XC / XE. Such a luggage carrier is simply practical for every tour as well as for everyday use. Very practical and uncomplicated with lashing straps things on the carrier lash (eg a luggage roll). In addition there are handles for the passenger. A massive luggage carrier also fits optically very well into the Scrambler line. The manufacturer gives a maximum load of 2kg (which is exaggerated from our technical point of view). On our own carrier at our scrambler we lash much more weight). Can also be installed in conjunction with the SW-Motech and Unit Garage side bag carriers.

Triumph luggage rack as a replacement for the pillion seat cushion for Triumph Speedmaster 1200 Black coated metal luggage rack from the Triumph original accessories.The bridge gives the Speedmaster a much more stylish look than the fat original seat cushion. Perfect for all those who are usually travelling alone and value a cool style. Changing between seat cushion and luggage rack is quick and easy. Style tip:It looks particularly good when the pillion grab rail is also removed. We recommend ordering the rail cover kit for this. See accessories below the description.