Please choose your bike

Bobber seat shell with black coating CB12758 / RS

Attention: This item is only a coating service.You must send us your original part after ordering. You actually like the original seat of your Bobber, but you would like to have the seat shell in black? No problem, then you don't have to buy a completely new seat. Simply send us your original seat shell and we will coat it in black. The coating is a very high-quality and very durable powder coating.

€70.00*

Paint injection moulding black CB12538 / RS0

You just want everything on your Triumph to be black? Then the fuel rail battery must also be black! Unfortunately, this is not as easy as with most other parts. Due to seals/nozzles etc., you can't powder coat the moulding. That's why we use a high-quality primer + silk-matt black paint. Everything is meticulously masked beforehand to ensure perfect functioning. About the handling: You send us your dismantled injection system and we take care of everything else. It will take approx. 4-6 weeks until you receive the injection bar back from us painted in black.Please note that the two front covers and the 4 covers (two upper and two lower) are not included in the paint job. You can also have these parts coated by us. These services can be found under accessories in this description.

€495.00*

Coat gear lever black CB12038 / RS0

Attention: This item is only the coating service.You must send us your original part after ordering. Black is beautiful! True to this motto, we offer you the opportunity to send us almost all metal add-on parts of your machine and we will powder coat them in black silk matt and send them back to you. Simply send us the disassembled gear lever and we will take care of everything else. If you have a gear lever with a rubber or screwed accessory shift pin (which is not to be coated), please fit this beforehand. Delivery time approx. 4 - 6 weeks.

€55.00*

Powder-coat injection mouldings LC black CB12009M / RS0

Attention: This item is only the coating service.You must send us your original part after ordering. Black is beautiful! True to this motto, we offer you the opportunity to send us almost all metal add-on parts of your machine and we will coat them in satin black and send them back to you. This is also possible with the upper and lower covers of the injection moulding. You simply send them to us, we press down the brass ring, blast the parts, glue the clamping area under the brass ring and press the ring back on after coating. You can choose whether the rings remain in brass as original or are coated in black. Delivery time approx. 4 - 6 weeks.

€85.00*

Details

Coat swing arm in black CB11960 / RS0

Attention: This item is only the coating service.You must send us your original part after ordering. Black is beautiful! The original swingarm has a rather unattractive die-cast surface look, which doesn't look particularly classy! It is also silver in colour.To give the swingarm a beautiful & smooth black surface, we also offer powder coating in black (RAL9005). The price applies to a removed swingarm that is delivered to us. We press out the bearings with a special tool. After coating, we press everything back into place professionally and replace a seal in the swing arm (this takes us about 2 hours, hence the high price). It takes about 2 - 6 weeks to get the part back.

€280.00*

Coating triple clamps black CB11961 / RS0

Attention: This article only concerns the coating service.You must send us your original part after ordering. BLACK BLACK BLACK. If you would like to have your triple clamp (top & bottom) coated in black powder, you are welcome to send us your dismantled triple clamps. We will take care of removing the bearing, masking etc. and then coat them black (RAL9005) The following will be black: upper & lower triple clamp. It takes about 2 - 4 weeks until you have the part back.

€150.00*

Coating pinion cover LC black CB11962 / RS0

Please note: This item only includes the coating service.You must send us your original part after ordering. If you don't like the original silver on your sprocket cover, you are welcome to send us your cover and we will coat it in black (RAL9005). Attention! Only possible for models with a metal sprocket cover, not possible for plastic parts. It will take about 4 - 6 weeks to get the part back.

€55.00*

Heel protection LC black coating CB11963 / RS0

Please note: This item only includes the coating service.You must send us your original part after ordering. If you don't like the original silver of the heel protectors on your footrests, you can send them to us and we will coat them in black (RAL9005). The price is for a PAIR. It will take about 4 - 6 weeks until you have the part back.

€50.00*

Sprocket cover Scrambler 1200 black coating CB12202 / RS0

Please note: This item only includes the coating service.You must send us your original part after ordering. If you don't like the original silver on your Scrambler 1200 sprocket cover, you are welcome to send us your cover and we will coat it in black (RAL9005). It will take about 4 - 6 weeks until you have the part back. Please note that we only offer the coating service. The original part must be delivered to us by the customer.

€40.00*

Coat handlebar mount black - LC CB12524 / RS0

Attention: This item is only a coating service.You must send us your original part after ordering. Fancy black? If you want a black line on your bike, you should also have the original, actually beautiful handlebar mount coated black. It will take about 4 - 6 weeks to get the part back.

€90.00*

Coating the lamp ring black CB12453 / RS0

Attention: This item only includes the coating service.You must send us your original part after ordering. True to the motto "black is beautiful", you can send us your silver lamp ring and we will send it back to you coated in black. It will take between 4 - 6 weeks to get the part back. Please note: this item only involves the coating of YOUR original part, which must be sent to us. The picture shown is only an example.

€35.00*

Black anodised Triumph fork tubes CB11136M / RS1

Triumph original golden fork black coating. Attention: This article only concerns the coating service.You must send us your original part after ordering. Many people don't like the original gold colour of the Thruxton R / RS / Scrambler / Speed Twin RS fork. That's why we offer to anodise the fork outer tubes in black. To do this, the dismantled, disassembled & cleaned fork tubes must be sent to us. Or you can choose the option with assembly, in which case you simply send us the removed fork, we disassemble it here on site and then reassemble it after anodising. Directly with better oil, which improves the response behaviour of the fork.If you would like to have it completely black (as shown in the first product picture), you also have the option of having the fork legs powder-coated black and the inner stanchions DLC-coated black. Anodising & shipping takes between 6 - 8 weeks. Important recommendation:We always recommend installing new oil seals and dust caps to ensure tightness. Without new caps, we cannot guarantee that the fork is 100% leak-proof. Note on the assembly costs: If you have your fork legs & fork tubes blacked by us, the assembly costs are only incurred once.

From €259.96*

Details

Thruxton 1200 R / RS fork legs with black coating CB11965 / RS9

Attention: This item only includes the coating service.You must send us your original part after ordering. If you don't like the original silver fork feet on your Thruxton, you can simply have them coated black by us. Simply send the disassembled fork to us and you will get it back with black fork feet. If you can't dismantle it yourself, you can simply send the whole fork to us and we'll do it for you (extra charge). It takes about 4 - 6 weeks to get the part back. We always make the parts in black silk matt as standard. Several other colours are of course also possible on request. The price is for the coating of both fork legs. Looks particularly good in combination with black fork tubes. Important recommendation:We recommend always fitting new oil seals and dust caps to ensure tightness. Without new caps, we cannot guarantee that the fork is 100% leak-proof. Note on the assembly costs: If you have your fork legs & fork tubes blacked by us, the assembly costs are only incurred once.

From €199.00*

Details

Pillion passenger grab rail with black coating CB12479 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. True to the motto Black is beautiful, you can send us all the metal parts of your motorbike so that we can coat them black.Don't like the silver colour of your original pillion grab rail? Then send it to us and we will coat it in black. We will then coat the part in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks.

€65.00*

Coating the front mudguard black CB12197 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. You have an aluminium mudguard and you no longer like the silver? Then send it to us and we will return it in black. We will then coat the part in black silk matt (RAL9005) and the processing time is approximately 4 - 6 weeks.

€65.00*

Coating the exhaust heat shield black CB12198 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. Would you like the original rear exhaust heat shield on your Scrambler in black? Then simply send it to us and we will powder coat it in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks.

€60.00*

Coating the rear mudguard black CB12199 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. You have an aluminium mudguard on your bike and you no longer like the silver colour? Then send it to us and we will return it in black. We will then coat the part in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks.

€75.00*

Coat motor guard black CB12200 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. True to the motto Black is beautiful, you can send us all the metal parts of your motorbike so that we can coat them black.Don't like the silver colour of the original engine guard on your Scrambler 1200? Then send it to us and we'll take care of the coating. We will then coat the part in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service here. The original part must be delivered to us by the customer.

€70.00*

Coating tank belts black CB12201 / RS50

Attention: This article only concerns the coating service.You must send us your original part after ordering. Do you want everything to be black? Then send us your original aluminium tank strap including the buckle and we will take care of the coating. The parts will then be powder coated in satin black (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€65.00*

Coating side cover plates black CB12203 / RS50

Attention: This article only concerns the coating service.You must send us your original part after ordering. You are the two aluminium plates on the left side cover of your Scrambler 1200 or the two plates left and right on your Speed Twin too conspicuous? Then just send them to us and we will powder coat them black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€75.00*

Coating injection moulding plates black CB12204 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. Would you like the original silver injection moulding plates on your motorbike in black? Then simply send them to us and we will powder coat them in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€35.00*

Coat lamp holder in black CB12206 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. Would you like your bike's original lamp holders in black? Then simply send it to us and we will powder coat it in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€65.00*

Handguards Scrambler 1200 black coating CB12207 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. You would like to have the metal struts of your Scrambler 1200 in black? Then simply send it to us and we will powder coat it in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€70.00*

Coating the side stand black CB12208 / RS50

Attention: This article only concerns the coating service.You must send us your original part after ordering. Black Black Black! Not all side stands are black ex works. If you make all the parts on the bike black, the stand in silver will also stand out negatively. We can also coat it black for you. Simply send us your side stand and we will powder coat it black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service here. The original part must be delivered to us by the customer.

€60.00*

Coat footrests black CB12211 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. You like the original pegs of your bike very much, because they are actually pretty cool (like on the Scrambler 1200), but you don't like them in silver? Then just send them to us and we will powder coat them black satin (RAL9005). The price is for ONE PAIR of pegs. Please remove all attachments such as rubbers or similar from the footrests and do NOT send them to us! Please note that the coating in the area where the footrest rests will wear off over time. The processing time is approximately 4 - 6 weeks. Attention! We only offer the coating service. The original part must be delivered to us by the customer.

€60.00*

Injection moulding cover black coating CB12275 / RS50

Attention: This item is only the coating service.You must send us your original part after ordering. Do you like the original injection moulding covers, but would like them in black? Then just send it to us and we will powder coat it black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service here. The original part must be delivered to us by the customer.

€35.00*

Coat exhaust cat cover black CB12312 / RS50

Attention: This item is only a coating service.You must send us your original part after ordering. Would you like the original catalytic converter heat protection cover for your Scrambler in black? Then simply send it to us and we will powder coat it in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€60.00*

Black coating on crash bar CB12425 / RS50

True to the motto Black is beautiful, you can send us all the metal parts of your motorbike so that we can coat them in black.Don't like the silver colour of your engine guard crash bars? Then send them to us and we will coat them in black. We will then coat the part in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service here. The original part must be delivered to us by the customer.

€85.00*

Coat exhaust cat cover black CB12426 / RS50

True to the motto Black is beautiful, you can send us all the metal parts of your motorbike so that we can coat them in black.Would you like to have your original catalytic converter cover in black? Then simply send it to us and we will take care of everything! We will then coat the part in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service. The original part must be delivered to us by the customer.

€60.00*

Coat radiator grille black CB12320 / RS52

Please note: This item only includes the coating service.You must send us your original part after ordering. True to the motto Black is beautiful, you can send us all the metal parts of your motorbike so that we can coat them black for you.You don't like the silver colour of the Triumph accessory radiator grille on your Scrambler 1200? Then send it to us and we'll take care of the coating. The part will then be sandblasted by us and coated in black silk matt (RAL9005). The processing time is approximately 4 - 6 weeks. Please note: we only offer the coating service here. The original part must be delivered to us by the customer.

€60.00*

Fork stanchions with black DLC coating CB12835 / RS600

DLC coating in black for fork stanchions. Would you like a black fork? Is it not enough for you that the outer tubes and fork legs are black? No problem, you can also have the inner stanchions of your fork DLC coated by us. Either you send us your dismantled tubes and we send them back to you coated or you send us your complete fork, we dismantle it and then send it back to you newly coated and reassembled. Please contact us beforehand so that we can make you an offer for the labour time. Important information:On some fork tubes of conventional telescopic forks (not USD forks)have fixed plastic inserts at the lower end. If this is the case, the inserts must be removed by us and reinserted + flanged after coating.and then re-inserted + crimped after coating. Classicbike-Raisch tip: If you would like to have it All Black: We also offer other coatings for the original fork (such as black powder coating of fork legs / black anodising of fork outer tubes). Coating takes approx. 2 - 4 weeks. The price is for a PAIR.

€399.00*

Coat brake lever foot in black CB12039 / RS600

Attention: This item is only the coating service.You must send us your original part after ordering. Black is beautiful! True to this motto, we offer you the opportunity to send us almost all metal add-on parts of your bike and we will powder coat them in black silk matt and send them back to you. Simply send us the dismantled brake lever and we will take care of everything else. Scrambler 1200: Please dismantle the part on which the foot rests + the spring and do NOT send it to us. Processing time approx. 4 - 6 weeks. Attention! We only offer the coating service here. The original part must be delivered to us by the customer.

€45.00*

Original manifold black ceramic coating CB10702 / RS600

Black MATT coating of your original manifold. You send us your original manifold and we send it back to you with a black ceramic coating. This takes approx. 3 - 6 weeks. ATTENTION !!! The price may vary, both upwards and downwards. Some manifolds now consist of significantly more than 2 parts and often also include accessory plates, so the total price will be higher. If you would like an exact price, you can send us pictures of the parts to be coated in advance and we will make you an offer.

€320.00*

Ceramic coating exhaust black CB11964 / RS600

We can coat your original rear silencer in black. Many people would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original exhaust and we will coat it in matt black with a heat-resistant ceramic coating. The price is for two rear silencers. Without heat protection plates, brackets, mounting material etc. (these parts can also be coated, but will then be charged separately). Takes approx. 4 - 6 weeks.

€400.00*

Coating battery box belt bobber black CB12194 / RS601

Attention: This item is only a coating service.You must send us your original part after ordering. You don't like the eye-catching silver aluminium belt on the black battery box of your Bobber? Then you can order this item here and send us the belt. We will then coat it in black silk matt powder and send it back to you.Please send only the two belts, without screws, sleeve etc. (the two parts shown in the photo are black). We need approx. 4 - 6 weeks for the coating. ATTENTION this item is only the service of your original straps, which must be sent to us.

€35.00*

Do you have a part that you would like to have coated in black and it is not listed here?

No problem, just send us an email to info@classicbike-raisch.de with a photo of the part or parts you would like to have black and we will make you an offer.