Titanium wheel bolt set for all BMW R Nine T models. Significantly lighter and with a nice look. The alloy Ti-6AL-4V is one of the best known of all titanium alloys and is used in medicine, the aviation industry, bicycles but also in motor sports. Advantages of the material are a very good corrosion resistance, a great appearance, high tensile strength and the weight saving compared to steel of approx. 42%. Weight per screw: approx. 20g The screws are available in 4 different colours (titanium colours are uncoated, with all other colours the screws are coated afterwards). The same titanium screw set is also available for the front brake calipers (see similar articles in this description).

Dakar brake caliper guards by Classicbike-Raisch for the BMW R12 G/S – kit  The front brake calipers on the R12 G/S are left quite exposed – stones, branches and off-road debris hit them head-on. Our Dakar brake caliper guards put an end to that. The covers fit snugly around the brake calipers, ensuring everything is properly protected without looking bulky. The ventilation slots and the cut-out RAISCH logo give the brakes a really rugged rally look.Awesome design & genuine protection for off-road use – that’s exactly how it should look on a G/S. So the protection serves two purposes at once: - Protection against stone chips, etc. - The angular, edgy protectors emphasise the G/S’s rugged off-road look – especially when combined with other metal parts from our Dakar range. Materials & Manufacture The brake caliper guard is entirely made in Germany. The parts are manufactured from 2 mm stainless steel, then welded, the weld seams ground smooth and finally powder-coated in black.2 mm stainless steel is exactly the right thickness: sturdy enough to withstand a heavy stone impact without adding unnecessary weight to the fork. Fitting Fitting is quick and easy. All the necessary fitting materials and sleeves, as well as fitting instructions, are included in the scope of delivery. Also suitable for the rear brake caliper We also offer the same protection for the rear brake caliper. This means you have uniform protection at the front and rear, and the look matches perfectly.See the accessories listed below this description.  More Dakar parts for your R12 G/S Want to give your R12 G/S the look of a proper off-road motorbike? In Dakar Rally style? Then take a look at the other parts from our Dakar range (such as fork guards, engine guards and shock absorber guards). You’ll find them below this description amongst the accessories.

Dakar rear brake caliper guard for BMW R12 G/S The cover fits snugly around the brake caliper, ensuring everything is properly protected without looking bulky. The ventilation slots and the cut-out RAISCH logo give the brake a really rugged rally look.Awesome off-road design & genuine protection for off-road use – that’s exactly how it should look on a G/S.The guard therefore serves two purposes:- Protection against stone chips etc. (which, of course, is rarely an issue on the G/S due to the position of the caliper) - The angular, edgy guard emphasises the G/S’s aggressive off-road look – especially when combined with other metal parts from our Dakar range. Material & Manufacture The brake caliper guard is made entirely in Germany. It is crafted from 2 mm stainless steel, then welded, the weld seams ground down and finally powder-coated in black.2 mm stainless steel is exactly the right thickness: sturdy enough to withstand a decent stone chip without adding unnecessary weight to the motorbike. Fitting Fitting is quick and easy. All the necessary fitting materials and a fitting guide are included in the delivery. Also for the front brake calipers We also offer the same protection for both front brake calipers as a left & right kit. This ensures you have uniform protection at the front and rear, and the look matches perfectly.You’ll find it amongst the accessories listed below the product description. More Dakar parts for your R12 G/S Want to give your R12 G/S the look of a proper off-road motorbike? In Dakar Rally style? Then take a look at the other parts from our Dakar range (such as fork guards, engine guards and shock absorber guards). You’ll find them below this description under the accessories section.

30mm brake line extension with offset  When modifying the handlebars, the brake line is often just a few centimetres too short to work properly. Having a new brake line made to measure (particularly for water-cooled Triumph and BMW models) is a faff, takes a long time and costs money.  This adapter solves exactly that problem. The offset on the line is particularly handy on many models (especially Triumph motorbikes with 1” handlebars).  The adapter is NOT type-approved. Contents: 1x adapter 1x hollow screw 4x sealing rings  The adapter can be used with all types of brake fluid. 

Black coated stainless steel screw set for the two expansion tanks (brake & clutch fluid caps) of your BMW. Like all BMW screws, the screws have a Torx head. The screws can be easily replaced individually screw by screw without fluid leaking (straighten motorcycle / reservoir).

BMW R nineT / R12 front brake disc bolts. Brake disc bolts for the front, made from extra high-strength 316 stainless steel, which is perfect for brake disc bolts.Suitable for all BMR R nineT models and all R12 models. ATTENTION: the screws are sold individually! The bolts must be used with Locktite / threadlocker.

The patented Rizoma Proguard system is a very practical part of every motorcycle. In case of a fall (or if the motorcycle simply tips over or hits a wall) the Proguards protect the brake and/or clutch levers as well as the rider's fingers. The minimalist design of the protectors ensures that they do not attract any negative attention on the motorcycle. The protectors are manufactured in a very high quality known from Rizoma. Additional adapters are required to mount the system (mounting on all Triumph motorcycles is only possible with an accessory handlebar).For mounting on all accessory handlebars we offer the adapter "Rizoma handlebar-mirror adapter uni. LP200B is required.For mounting on the original handlebars of a BMW R9T the adapter "BMW R9T Adapter Weights + Mirror" LP321B is requiredFor adapters see accessories in this description. The price is for one protector

250ml DOT 4 brake fluid for almost all brakes. The content of 250ml is normally sufficient for a brake fluid change on the motorcycle.   Price per litre: 19,80