Headlight Grill Alcatraz - R9T CB12595 / -1
The BMW R nineT Alcatraz lamp grille is a precision lamp grille manufactured in Germany that looks very solid and high-quality and also protects your headlights from rough stone chips. Based on the well-known American prison Alcatraz, the lamp grille is reminiscent of massive bars. Made entirely from aluminum, the grille is laser-cut in many individual parts and then welded by hand. The protruding individual struts give the grille a 3D look and it doesn't just sit flat in front of the lamp, as is the case with most other grilles. Visually, the grille enhances the original headlight of your R9T and skillfully creates a highlight on the motorcycle. Fitting the grille is very easy and can be completed within 1-2 minutes. Note on the Urban GS Racer: The grille only fits on the Urban if the original lamp mask has been removed.  

€109.95*
Headlight Grill Alcatraz - R9T - LED CB12596 / -1
The BMW R nineT Alcatraz LED lamp grille is a precision lamp grille manufactured in Germany that looks very solid and high-quality and also protects your headlights from rough stone chips.The LED version of the Alcatraz grille is suitable for all BMW R nineT Euro 5 models that have the original LED headlight installed. The bars of the Alcatraz grille have the same lines as the LED insert of the R9T headlight insert. This highlights the beautiful LED headlamp even more. Based on the well-known American prison Alcatraz, the lamp grille is reminiscent of massive bars. Made entirely from aluminum, the grille is laser-cut in many individual parts and then welded by hand. The protruding individual struts give the grille a 3D look and it doesn't just sit flat in front of the lamp, as is the case with most other grilles. Visually, the grille enhances the original headlight of your R9T and skillfully creates a highlight on the motorcycle. Fitting the grille is very easy and can be completed within 1-2 minutes. Note on the Urban GS: The grille only fits on the Urban if the original lamp mask has been removed.  

€129.95*
Headlight Grill Thunderbolt LED CB12287 / 2
This lamp grid was specially designed for the KOSO Thunderbolt LED headlight: The struts are precisely matched to its design. As a result, the grille integrates perfectly into the modern look of the KOSO Thunderbolt - especially in combination with its daytime running light. The lamp grille is designed to use either the upper M6 fasteners on the back of the Thunderbolt LED headlight, or the lower ones. This also allows the lamp grid to be combined with a headlight mount that uses the lower rear M6 mounts for attachment.(For example, our holder for the RnineT.) The lamp grid is made of stainless steel, which is laser cut, edged and then TIG welded. The edges of the lamp grid are then rounded before it finally receives its satin black finish through a resistant powder coating. Like all KRT Frameworks parts, the lamp grid is developed and manufactured at our plant in Beelen. For the few jobs that are outsourced to service providers (e.g. powder coating and painting), we work together with companies from the region. This way we can happily give KRT products the label "Made in Germany".

€119.00*
Rizoma Headlight grid CB11376 / 3
Aluminum lamp grid for R9T Classic, Pure & Scrambler. In black anodized suitable for the original headlight.

€178.50*
Rizoma Headlight grid R9T Urban GS CB11377 / 3
Aluminum lamp grid for R9T Urban GS. Sort for a nice rustic look. Why it belongs to an urban GS to terrain style. In black anodized suitable for the original headlight.

€254.00*
Headlight Plate Bates Style R9T CB12008M / 4
The aluminum headlight sheet metal clears the front of the R9T and prevents an open view of the steering head and all cables.Fits with the original headlight as well as with the small 5 3/4 headlight from our range.Fits the R9T Scrambler & Urban GS (for the GS the lamp mask has to be removed and the lamp holder of the scrambler has to be mounted). To get a nice clean front, there is now the aluminum headlamp sheet metal in silver (aluminum raw optimal to use it simply to install it, polish it or brush it matt), black powder coated The sheet metal is simply put between the two fork bridges, behind the headlight (headlight does not have to be disassembled) and then fastened to the two fork legs with leather straps (included in delivery, available in black or brown) (fits nicely so that nothing rattles). An assembly instruction is naturally also included.In addition, an edge tape is included in the scope of delivery, which looks nice and classic on the one hand and protects the cables and wires on the other hand.The assembly is quite simple and fast, the original headlight does not have to be disassembled.

From €94.95*
Headlight X CB11936M / 5
This is old school!In the style of old classic cafe racers these leather straps are made. Who doesn't know the cool old Cafe Racers that have a cross glued on the headlight. A more elegant solution is a handmade leather strap (available in perforated or unperforated version).The leather tape has a good adhesive 3M glue on the backside, with which the tape is glued to the headlight (but can also be removed easily).Dimensions: length 19cm / width 1,5cm   This is long enough for any standard headlight up to min 7". For smaller headlights, the band can be shortened easily with scissors.

From €21.95*
Lamp holder CNC CB10578 / 6
Lamp holder CNC machined in black.

€159.95*
LSL Headlight Brackets adjustable CB12230M / 600
CNC machined, black anodized aluminum lamp holders from LSL. In these lamp holders, the screw connection of the mounting braces is arranged in a line to the fork legs. By rotating the lamp clamps, the holder can be adjusted so infinitely variable to the required width of the headlight. As with the well-known LSL lamp holders, the rotating version of the clamps are made of aluminum, black anodized and available in the diameters of the common motorcycle fork tubes.Choose the variant that fits your vehicle. There are the holders with in 3 different lengths (the strut) to get a perfect distance from the headlight to the motorcycle (please measure it on your motorcycle.Below the pictures you can see a drawing that illustrates from where to where the different brackets have the specified dimension.Long: 82mmShort: 67mmExtra short: 40mm There are also holders for different fork diameters (please measure on your bike). The holders have a nicely integrated 8mm turn signal mount in the strut. A perfect position to mount a small turn signal, such as the Motogadget pin turn signal from our range.If you don't want to mount a turn signal at this position, we recommend our turn signal plugs M8, with which you can easily close the hole (see accessories in this description). The assembly instructions are available under the downloads in this description.

From €149.95*
Headlight holder Next Gen CB12475.5M / 600
Wunderkind Next Generation lamp holders. These are CNC-milled aluminum lamp holders with adjustment options. These filigree brackets are perfect for mounting the Twinton headlight on a bobber.The holders can of course also be used as universal lamp holders for any other motorcycle (please measure the dimensions of your fork). The practical thing about these lamp holders is that they have a kind of hinge. This means you don't have to remove the fork of the motorcycle to fit them. In addition, the arms of the holders can be swiveled so that headlights of different widths can be installed. The brackets are available in four different sizes (please select) Dimensions information for Bobber & Speedmaster 1200:The long version of the lamp holder must be ordered for the Twinton headlight.For the Koso Thunderbolt headlight, the short version of the lamp holder must be ordered. Bobber 19": 41-42mmBobber 19" with fork covers: 49-50mmBobber Black & Speedmaster: 47-48mmBobber Black & Speedmaster with fork covers: 53-54mm

From €159.00*
LED parking light bulb CB12612 / 660
This LED parking light bulb produces a very modern, bright white LED light, perfectly matching the Phillips LED bulb we sell. This makes the headlight light of a simple H4 headlight look much more modern. In addition to the parking light bulb, we also recommend replacing the main headlight bulb with an LED version. The bulb for the main headlight can be found under accessories in this description. Note for BMW R nineT motorcycles:An additional resistor is required to install the LED bulb on an R9T and not have an error displayed in the speedometer (this can be found under accessories in this product description).

€14.90*
Parking Light Bulb Clear Light CB11885 / 660
This parking light bulb produces a modern white, slightly bluish light. Thus the headlight light of a simple H4 headlight appears clearly modern. Looks especially good in combination with the Night Breakt bulb on the air-cooled Triumph models.

€7.95*