€0.00*
Please choose your bike
Handwheel for fork adjustment
Handwheel for fork adjustment CB11379 / RS12
AC Schnitzer CNC-milled aluminum hand adjuster for the damping of the rear shock absorber on your BMW R12. As standard, you can adjust the damping of the original shock absorber on your BMW using the adjuster wheel, which is practical. Only the cheap plastic adjuster doesn't look too good. AC Schnitzer has the solution here. A beautifully milled & black anodized aluminum part, which looks significantly higher quality than the original and also feels better to the touch.    

€54.90*
Legendgear Mobile Phone Case
Legendgear Mobile Phone Case CB10992 / RS12
Legend Gear Smartphone bag LA3 A practical smartphone bag which can be used on all Legendgear tank belts, tank bags or on the additional bag. Since the mobile phone is almost a navi. In the bag is also a portmorneee intigrated to have the necessary small money on the tour. Additional pocket for smartphones with a display up to 5.5 PVC viewing window allows touch operation Additionally inside: Money box and three credit card slots Suitable for Legend Gear bags, saddlebags, side pockets and tank bags. Can also be used on saddlebag holders SLS and tank belts SLA. A tried and tested fastening system with a combination of the retaining loop and the securing strap Round zipper Material: Durable Napalon artificial leather, water resistant PU inner coating Size: 9.4 x 2 x 18 cm (W / H / D)

€30.00*
Legend Gear Shoulder Strap
Legend Gear Shoulder Strap CB10998 / RS13
Legend Gear shoulder strap LA4 The Legend Gear shoulder strap LA4 complements the retro luggage portfolio of SW-MOTECH. With the shoulder strap in a timeless design, saddle bags, tank bags and rear pockets of the Legend Gear series can easily be converted into a practical shoulder bag. In addition, all three accessory pockets can be attached to the shoulder strap (see accessories) Padded shoulder strap provides increased comfort Straps allow a secure and flexible attachment of additional pockets Sturdy holding hooks made of anodized aluminum Fits Legend Gear bags, saddlebags and tank bags The length of the shoulder strap can be varied between 90cm and 150cm via 2 belt adjusters Material: Durable Napalon artificial leather, polyamide strap, anodised aluminum Dimensions: 3.8 x 150 (90) cm (W / L). Delivery: Legend Gear shoulder strap LA4

€30.00*
Tyre Repair
Tyre Repair CB11721 / RS15
A puncture tyre spray is a must for every luggage! A hole in the tyre ends every tour immediately and you rarely have a flat tire in front of a workshop. With the spray in the tyre you can at least get to the next workshop relaxed without being towed away. Sprayable filling foam for punctures. Repairs and refills the tyre (with or without inner tube) without removal and without tools. However, the tube or tyre must not be torn and the tyre must still sit completely on the rim. Contents: 300ml (Price per litre: 43€)

€12.90*
AC Schnitzer Tank Cap - BMW
AC Schnitzer Tank Cap - BMW CB10594 / RS15
The AC Schnitzer Heritage filler cap combines outstanding functionality with trendy vintage design. It has a "press`n turn" closure. This means that you have to press down the pin in the middle and then turn it to open the tank cap. This allows a very fast opening as well as opening with motorcycle gloves. An assembly instruction is included.

€169.00*
Motul Helm & Visor Cleaner
Motul Helm & Visor Cleaner CB11723 / RS16
Helmet and visor cleaner for quick and gentle cleaning of the helmet surface and visor. Effectively removes dust, insects and other dirt without attacking the surface. Spray onto helmet and visor, allow to act briefly and rub with a soft, lint-free cloth. For optimum care and cleaning, we recommend the Motul microfibre cleaning cloth (see accessories in this description).Or the Magura cleaning sponge (see accessories in this description). Content: 250ml (Litre price: 43€)

€10.90*
Decor Aufklber Set BMW R9T Racer
Decor Aufklber Set BMW R9T Racer CB11650 / RS16
Decor set in black to stick on a R9T Racer.The sticker set sets for small money, some chic accents on a R9T Racer (see photos on the motorcycle).To apply the stickers you should have a steady hand!

€49.00*
Motul Helmet Lining Cleaner
Motul Helmet Lining Cleaner CB11724 / RS17
Helmet interior cleaner. Gently and thoroughly cleans the helmet pad. High depth cleaning. Disinfects and removes odours. Dermatologically tested - does not irritate the skin. No dilution with water required. Spray onto the helmet pad, act and leave to dry. Contents: 250ml (Price per litre: 39,6€)

€9.90*
Motul Multifunctional Öl
Motul Multifunctional Öl CB11725 / RS18
Sprayable multifunctional oil. Lubricating oil for hinges and joints. Rust remover for tightened screws. Preserves metal parts. Permanently protects the preserved areas from rust and oxidation. Forms protective film. Prevents squeaking noises. Ideally suited as an external preservative. Neutral to paint, rubber and plastic. Contents: 400ml (Litre price: 19,75€)

€7.90*
License support sideways - AC Schnitzer
License support sideways - AC Schnitzer CB10597 / RS18
AC Schnitzer license plate holder, for side mounting of the license plate with TÜV parts certificate. Manufactured from high quality aluminium, black anodized and with accent milling to give the surface an even higher quality finish.As usual, top quality from AC Schnitzer.The scope of delivery includes an LED license plate light, as well as all the necessary installation materials and installation instructions. Perfect for anyone who wants to fit a clean rear without a license plate or a short aluminium mudguard. The practical thing about this license plate holder is that it does NOT have a license plate plate. This means that it can be used optimally for any license plate size. With parts certificate means that the license plate holder is supplied with TÜV papers and can be easily (and cheaply) registered.   License plate size:The mount for the license plate has a dimension of 150mm height - 110mm width. In other words, all license plates that have at least this dimension can be optimally installed and cover the holder.Suitable for all countries.

€279.00*
Details
New
Rizoma Eccentrico Mirror
Rizoma Eccentrico Mirror CB12870 / RS20
Rizoma Eccentricio handlebar end mirrors including handlebar spacer.With E-number / road approval. The Eccentricio mirror is a very classic, round handlebar end mirror that strikes a perfect balance between classic shape and modernity thanks to its high-quality workmanship and top surfaces. Anyone familiar with Rizoma products knows that these are absolute high-end products. The scope of delivery includes a handlebar extension for those who do not want to clamp the handlebars directly around the handlebars.However, suitable adapter rings are also included so that the mirrors can be clamped directly to any handlebar.Mounting:There are special and universal adapters for the Rizoma mirrors.Universal mounting on accessory handlebars that are hollow on the inside:- Clamp the mirror directly around the handlebars. We recommend ordering the MA531 “Rizoma Cap End Weights” end caps to ensure a clean handlebar finish.- Clamp the mirror around the handlebar extension supplied. The LP200B “Rizoma handlebar-mirror adapter uni.” adapter is also required to install the widening. Triumph LC models - water-cooled:- The mirrors can be clamped directly around the end of the original handlebars.In order to have a nice handlebar end finish, we recommend ordering the end caps MA531 “Rizoma Cap End Weights”. Triumph AC models - air cooled:- If you want to mount the mirrors on the original handlebars, you also need the adapter BS816B “Riz adapter handlebar mirror+weight Triumph AC” BMW models:- If you want to mount the Rizoma mirrors on the original handlebars of your BMW, you also need the adapter LP321B “BMW R9T adapter weights + mirrors” All adapters can be found below the description under the accessory products. Classicbike-Raisch tip:If you convert your motorcycle to handlebar end mirrors, you will usually end up with the unsightly threads for the original mirrors on the handlebars. We offer suitable fitting clamps without mirror threads to solve this problem.

€179.00*
New
Rizoma Eccentrico Mirror
Rizoma Eccentrico Mirror CB12871 / RS20
Rizoma Reverse Radial handlebar end mirrors including handlebar extensions.With E-number / street legal. The Reverse Radial mirror is a very classic, sporty, oval handlebar end mirror that impresses with its high-quality workmanship and top-notch finish. Anyone familiar with Rizoma products knows that these are absolute high-end products. An absolute highlight on any motorcycle! Perfect for any café racer conversion where the motorcycle should have a flat line.The mirror can be mounted upwards or downwards. The scope of delivery includes a handlebar extension for those who do not want to clamp the mirror directly onto the handlebar.However, matching adapter rings are also included so that the mirrors can be clamped directly to any handlebar.Installation: There are model-specific and universal adapters for Rizoma mirrors.Universal installation on accessory handlebars that are hollow on the inside:- Clamp the mirror directly around the handlebar. To ensure a clean handlebar finish, we recommend ordering the MA531 “Rizoma Cap End Weights” end caps.- Clamp the mirror around the handlebar extension supplied. To install the extension, the LP200B “Rizoma Handlebar Mirror Adapter uni.” adapter is also required. Triumph LC models - water-cooled:- The mirrors can be clamped directly around the end of the original handlebars.To ensure a neat finish at the end of the handlebars, we recommend ordering the MA531 “Rizoma Cap Endweights” end caps. Triumph AC models - air-cooled:- If you want to mount the mirrors on the original handlebars, you will also need the BS816B “Riz Adapter Handlebar Mirror + Weight Triumph AC” adapter. BMW models:- If you want to mount the Rizoma mirrors on the original handlebars of your BMW, you will also need the LP321B “BMW R9T Adapter Weights + Mirror” adapter. All adapters can be found below the description under the accessory products.   Classicbike-Raisch tip: If you convert your motorcycle to handlebar end mirrors, you will usually be left with unsightly threads for the original mirrors on the handlebars. We offer matching bracket clamps without mirror threads to solve this problem.

€194.00*
Details
Luggage rack BMW R12
Luggage rack BMW R12 CB12812 / RS20
Steel tube luggage rack from the German manufacturer Hepco & Becker suitable for the BMW R12 models (please select your model in the selection). The Hepco & Becker luggage racks are very high-quality and stable luggage racks that also look very good.The classic tube design is discreet and unobtrusive. The steel racks are powder coated in black after welding, which ensures a long service life. The scope of delivery includes assembly instructions and all the necessary assembly materials. The manufacturer specifies a maximum load of 5kg (although these values are always specified very low by the manufacturer so that they are legally covered).

€257.90*
Details
AC Schnitzer Speedo Cover - R12
AC Schnitzer Speedo Cover - R12 CB12811 / RS20
Aluminium speedo cover for the TFT speedo of the BMW R12 & R12 nineT from AC Schnitzer.   This high-quality CNC-milled aluminium cover skilfully upgrades the original TFT speedometer of your BMW R12. The original speedometer display and the size itself are already very nice from the factory.  The plastic cover on the back, on the other hand, is very simple and looks cheap.  With the cover from AC Schnitzer, this is a thing of the past. The cover replaces the original plastic cap and sets skilful accents with its milled areas.    Installation is very simple and quick.

€139.90*
Motogadget Speedo Brackets BMW R9T
Motogadget Speedo Brackets BMW R9T CB12046M / RS20
CNC machined aluminum speedometer holder, spieziell for the BMW R nine T Euro 4 models. Please select the correct speedometer in the selection.

€39.00*
Details
Template for SW-Motech SLC side pocket holder
Template for SW-Motech SLC side pocket holder CB11867 / RS20
This template has exactly the same dimensions as the screw connections of the SW-Motech SLC holders. So it is easy and fast to transfer the hole pattern perfectly to any bag to screw it to the stylish SW-Motech holders.

€4.95*
Throttle Grip Aid
Throttle Grip Aid CB11795 / RS20
The throttle grip aid is very practical for longer journeys at constant speed (e.g. motorway journeys). You just put your hand (ball of your thumb) on the throttle grip help and the throttle position is held. Really very pleasant. The part is put within a few seconds on the grip and also removed again. For handles with a diameter of 30-35mm (these are most handles).

€5.95*
Fuel System Clean
Fuel System Clean CB11727 / RS20
JMC System clean 250ml: Fuel system cleaner especially for two-wheelers with 4-stroke engines. Removes corking in the combustion chamber, resin deposits in the carburettor, adhesions of the injection nozzles and condensation water in the fuel system. Achieves best engine performance, significant fuel savings and longer service life with regular use. Stabilizes the fuel. Especially recommended for wintering, especially for carburetor models!

€27.95*
Superbike FatBar SW, SI & Gold
Superbike FatBar SW, SI & Gold CB11050M / RS20
LSL Superbike handlebars Fatbar Flat for crown 127T071. Measurements: 740x150x60

€89.95*
Details
Rear conversion AC Schnitzer
Rear conversion AC Schnitzer CB10600 / RS21
AC Schnitzer rear rear fenders with new LED taillight (no backlight) with ABE

€159.00*
Rear wheel brake
Rear wheel brake CB10601 / RS22
AC Schnitzer container for rear wheel brake. The cover is only as in the second picture in black. With ABE

€79.90*
Handlebar Leather Toolbag
Handlebar Leather Toolbag CB11883M / RS50
Real leather bag for mounting on cross handlebars or a handlebar cross brace. Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your pocket. All the time you grab your leg to make sure that nothing falls out of your pocket. With this small bag, the problem is solved. It also gives the handlebars of your bike a really nice look. Only works with bolted handlebar struts, not with cross handlebars with welded-in handlebar struts.

€99.95*
Details
Rizoma headlight protector
Rizoma headlight protector CB11239 / RS50
Aluminum lamp grid for R9T Classic, Pure & Scrambler. In black anodized suitable for the original headlight. Not only protects the headlight, it provides an eye-catcher in the headlight area. Besodners suitable for a more rustic conversions!

€185.00*
Footrests R9T black Powder coating
Footrests R9T black Powder coating CB12321 / RS52
You like the original rests of your machine, but you do not like them in silver? Then just send them to us and we will coat it black satin (RAL9005) powder. The price is for ONE PAIR of pegs. Please remove all attachments like rubbers or similar from the footrests and do NOT send them to us! Please note that the coating in the area where the foot rests will wear off over time. The processing time is approximately 3-4 weeks. Attention! we offer here only the service of the coating. The original part must be delivered to us by the customer.

€60.00*
Roadstar tail tidy BMW R nineT
Roadstar tail tidy BMW R nineT CB12827 / RS100
Short Unit Garage 1-piece rear fender for your BMW R nineT Roadster The shortest rear end for true individualists Are you looking for one of the most compact and stylish rear ends for your BMW R nineT Roadster? With the Unit Garage 1-piece rear fender, you can take your bike to a new level! This rear fender is one of the shortest currently available on the aftermarket for the nineT Roadster – perfect for a clean, minimalist look. Optimized for the R nineT Roadster and Classic models On the Roadster and Classic models of the BMW R nineT, the pillion frame and the entire rear frame can be removed and replaced with screws. This makes it super easy for you to convert to a sleek 1-man rear end. But let's be honest: if you just remove the rear frame and the pillion pad, the rear often looks unfinished. This is where the Roadster rear end from Unit Garage comes in. With this rear end, you not only get the option of removing the pillion section, but also a clean and stylish finish – so your bike looks great all round! Complete kit with everything you need The kit includes everything you need for the conversion: Detailed assembly instructions All the necessary mounting materials The conversion is quick and easy, so you can get started right away! Lighting: modern LED technology The kit includes an LED stripe rear light that combines a rear light, brake light and turn signal in one. Particularly cool: the turn signals light up at the ends of the stripe (watch the video in the product description). Note: The rear light does not have an E-number/approval. However, in our experience, there are no problems with authorities because the rear light and turn signals are very visible. Compatible with side license plate holders The 1-man rear fender is compatible with all side license plate holders in our range. You can find these directly below the product description in the accessories. Paintwork The rear kit is available directly from the manufacturer Unit Garage in a range of colors (these are all compatible with the Unit Garage tanks that we also have in our range).The kit is also available in RAW/unpainted, so that you can then have the rear painted in your favorite motorcycle color.

€659.00*
Details
Remus Slip on - R12
Remus Slip on - R12 CB12702M / RS100
The Remus stainless steel exhaust system for the R12 is here. And this time, fortunately, again in the popular stealth design that was previously available for the R nineT. As you would expect from Remus, the exhaust has a very high quality finish and a very good fit. The conversion of the slip-on exhaust is very quick and easy. Visually, the exhaust gives the nineT a tidier rear area and, above all, the view of the beautiful rim is improved. The Remus Stealth exhaust doesn't have to hide in terms of sound either. The Remus sounds significantly duller and somewhat throatier than the original. Power: + 3.1 HPTorque: + 3.2 NMWeight: - 1.28 kg   Listen to the sound! Here you can listen to the sound of the Remus exhaust (at the end the sound of the original exhaust is also shown for comparison)

€499.95*
Details
Handlebar Weights Flat Cap for Alu Handlebar
Handlebar Weights Flat Cap for Alu Handlebar CB10924M / RS101
LSL handlebar weights chrome or black for 1", 22mm and FatBar (all R9T models) Alu handlebar pair. The internal thread of the original handlebar must be removed or drilled out.

€24.95*
Details
Mounting bracket
Mounting bracket CB00212 / RS102
Mounting plate MSC-A Black or silver. 2 cylinders

€23.00*
Bracket black
Bracket black CB00231M / RS108

€39.90*
Details
Cup for Motogadget Speedster & Tiney
Cup for Motogadget Speedster & Tiney CB00233M / RS109
Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

€39.00*
Details
Vintage Cup
Vintage Cup CB00236 / RS110
Vintage Cup: Beautiful copper outer cup for mounting between the handlebars. The eyecatcher par excellence. Fits for Motoscope mst. Vintage. Available with mounting bracket for 22mm handlebars or 1 handlebars.

€119.00*
Motosign Mini
Motosign Mini CB00253 / RS113
Motosign mini black control lamps

€89.00*
MSM Halteblech
MSM Halteblech CB00254 / RS114
Motogadget MSM Bracket bracket c Black

€26.00*
Motogadget Combiframe
Motogadget Combiframe CB10748 / RS115
Motogadget Combiframe for Motogadget Mini Tacho. The perfect holder for the mini speedometer with intriguing LED control lights (5 pieces). The retaining plate is also required for the mounting. Color: Black (other colors on request)

€119.00*
Switch
Switch CB00213M / RS151
Stainless steel button to set the speedometer menu.This button can be used e.g. simply integrate it into the retaining plate of the speedometer and can then jump around in the menu of the speedometer and adjust everything.

€18.05*
Details
Motoscope Speedo Mount JVB Lamp Mask
Motoscope Speedo Mount JVB Lamp Mask CB11645 / RS359
The perfect speedometer holder for all who want to use the Motogadget Motoscope speedometer in combination with the JVB lamp mask. See photo

€59.00*
LSL Racing Footpegs sloped
LSL Racing Footpegs sloped CB10727M / RS599
LSL Aluminium Racing Ratchets bevelled and knurled in black & silver. The pegs are nice and short, but still offer a good grip due to their very rough knurling. Just the right thing for a sporty Cafe Racer conversion. For mounting on the motorcycle, additional model specific adapters are required. You will find suitable adapters for the different motorcycles in the accessories of this description. Ratchets and adapters are available with ABE!

€34.95*
Details
LSL Racing Footpegs
LSL Racing Footpegs CB00331M / RS599
LSL aluminum footrests heavily knurled in black & silver. The rests are nice and short, but still offer a good grip due to their very rough knurling. Just the right thing for a sporty Cafe Racer conversion. For mounting on the motorcycle, additional model specific adapters are required. You will find suitable adapters for the different motorcycles in the accessories of this description. Ratchets and adapters are available with ABE!

€34.95*
Details
LSL Retro Mirror
LSL Retro Mirror CB11985.1M / RS599
A classically beautiful simple mirror at a really fair price. Is made of milled aluminium, glass bead blasted, therefore great matt finish. Really not too big and with E-mark. Price per piece.Included in delivery are 2 different adapters, with which the mirrors can be mounted in every mounting.Because of the joint in the mirror, the mirror can run nice and flat over the handlebars. Looks optically very nice, because many other round mirrors stand out very high and look from the front like mouse ears.Model specific mounting instructions:Bonneville LC, Bobber, Speedmaster, Scrambler 1200:These models do not have a mirror thread ex works, but simply a hole in the fitting. In addition, this hole is very far inside, which means that when mounting accessory mirrors without a widening, you can hardly see anything to the rear. Therefore you have to order the article "Mirror mount + widening fittings without thread LC" (see accessories in this description) for mounting & for a better view.Bonneville AC + Thruxton EFI / AC:For these two motorcycles an additional adapter is needed, because you have only one mirror hole in the original fitting (see accessories in this description)

€64.95*
Details
New
Fuel Stabilizer
Fuel Stabilizer CB12869 / RS600
MOTOREX FUEL STABILIZER PLUS – More power and protection for your bike Why do you need a fuel stabiliser? If your motorcycle is parked for a long time (e.g. over the winter or because you don't ride it very often), today's ethanol-blended fuel can cause quite a few problems. Ethanol attracts moisture from the air. This causes the fuel to lose power, burn less efficiently and can even lead to corrosion. Many people are unaware that almost all petrol sold today contains ethanol. Compared to 100% pure petrol, this fuel delivers less power and consumes more fuel. What does FUEL STABILIZER PLUS do? FUEL STABILIZER PLUS addresses precisely these weaknesses: Prevents phase separation (i.e. the separation of water and ethanol in the tank) Improves combustion → Your engine runs cleaner and more efficiently Protects against corrosion → Less rust in the tank and injection system Maintains fuel quality, even if your bike is not used for long periods Whether 2-stroke or 4-stroke, the stabiliser works with all ethanol-containing fuels. Your advantage: You get more power, better efficiency and less hassle with fuel when your motorcycle is not in use.If you want to do something good for your motorcycle and love it, you can add a bag of Fuel Stabiliser every time you fill up. If that's too expensive, you can also do it only occasionally.

€3.99*
BOS Passs shooter exhaust - R9T
BOS Passs shooter exhaust - R9T CB12860 / RS600
Peasshooter stainless steel slip-on exhaust for BMW R nineT models   The Bos Peasshooter exhaust has a beautifully classic shape and is the perfect exhaust for those who want to keep their R nineT in a classic style. The exhaust fits all models that have a downpipe from the factory. Can be easily replaced with the original exhaust in just a few minutes using plug & play. Approval:The exhaust system has an E-number for all Euro 4 models and is therefore street legal.It also fits the Euro 3 model and is also supplied with an E-number for this, but this is not officially for the model. Weight: With the exhaust, you have a saving of 1.2kg compared to the series (from the Euro 4 model) Performance:The R9T also performs a little better in terms of power with the exhaust: +2.4 hp Optional accessories:Exhaust valve control: Do you want more sound at the push of a button? No problem, order our control unit (you can find it among the accessories in this product description).Exhaust bracket: If you would like to remove the pillion frame for visual reasons, you can order our exhaust bracket to go with it. See accessories.

€479.00*
Shock protection - Bilstein
Shock protection - Bilstein CB12845 / RS600
Shock absorber protection for the Bilstein shock absorber of the BMW R nineT A well-known problem with all BMW R nineT models: the shock absorber is unprotected and constantly exposed to stone chippings, water and dirt. That's why we have developed a sturdy protection for our Bilstein shock absorber, which not only extends the service life of the shock absorber, but also prevents scratches caused by stone chippings. Not a must – but a clean and protected suspension is always the better choice. Optically & functionallyOur protection is not only practical, but also blends harmoniously into the design of your machine – especially with scrambler models, it fits perfectly into the overall picture. Advantages: Optimal protection against dirt & stone chips Longer life of the shock absorber Perfect look – ideal for scrambler models Easy to assemble with all accessories & instructions Contents: Shock absorber protection Mounting material Instructions

€79.95*
Fork stanchions black DLC coating
Fork stanchions black DLC coating CB12835 / RS600
DLC coating in black for fork tubes. Do you want a black fork? Are you not satisfied with the black outer tubes and fork feet? No problem, we can also DLC coat the inner fork tubes for you. Either you send us your removed tubes and we will send them back to you coated, or you send us your complete fork, we will disassemble it and then send it back to you newly coated and reassembled. But please contact us beforehand so that we can make you an offer for the labour costs. Classicbike-Raisch tip:If you would like it all black: we also offer other coatings for the original fork (such as powder coating the fork feet black / anodising the outer fork tubes black). The duration for the coating is approx. 2 - 4 weeks. The price is for a PAIR.

€399.00*
Exhaust valve eliminator control
Exhaust valve eliminator control CB12831 / RS600
Control unit to eliminate the exhaust valve on all BMW R nineT models. If you remove the exhaust valve on your R9T, it may cause an error message in the on-board computer, which is shown on the display.Regardless of whether you are simply replacing the valve with a replacement pipe or installing a complete system without valve control. This module is simply plugged in instead of the original valve and no error message is displayed.

€69.95*
Beeline Moto II - RAM Ball Mount
Beeline Moto II - RAM Ball Mount CB12821 / RS600
The Beeline Moto RAM Ball Mount Kit allows the attachment of the Beeline Moto 2 navigation system to the common RAM ball systems, as they use many Navigtionssysteme (TomTom or SW.Motech fastening system eg). Fits RAM ball clamp with 1 inch diameter.

€22.90*
Headlight ring R9T - milled aluminium
Headlight ring R9T - milled aluminium CB12802 / RS600
CNC-milled aluminium ring for your BMW R nineT headlight (Euro 3 & 4 models) Do you want to give your BMW R nineT headlight a real upgrade? Then this high-quality CNC-milled aluminium ring is exactly what you need! The two-part ring is not only robust, but also a real eye-catcher: black anodised and with an elegant silver milled surface at the front, it provides the perfect contrast and gives your bike that certain something. Thanks to the two-part design, the ring can easily be put over the original headlight ring and housing and then securely screwed on. This gives your BMW a stylish and at the same time elegant look that is sure to impress! Everything you need for installation is of course included – including protective rubber rings for your original headlight housing.

€89.95*
Headlight film - yellow
Headlight film - yellow CB12801 / RS600
Film set for wrapping the headlights and fog lights of your motorcycle. The set contains everything you need to apply the film neatly and crease-free. The film has a size of 30 x 100 cm - i.e. you have several attempts if the first one doesn't work.Note: According to the StvO, it is not permitted to apply yellow film to the main headlight.  

€16.95*
Aluminum hump - R12 nineT
Aluminum hump - R12 nineT CB12793 / RS600
  Aluminum hump for BMW R12 nineT - Give your bike the ultimate cafe racer look This high-quality aluminum hump transforms your BMW R12 nineT into a real cafe racer in no time at all. Traditionally, a cafe racer dispenses with a two-person seat and instead relies on a distinctive hump, which provides the typical sporty style. The seat cover can be easily removed so that you can also ride your R12 comfortably with two people if required. The hump is made of brushed aluminium and is then clear anodized to keep the elegant, brushed surface visible while protecting the material from external influences. For those who prefer an individual touch, the aluminum surface is perfect for painting. This allows you to design the hump in the same color as your motorcycle and give your bike a harmonious overall look.

€589.00*
Magnetic oil drain screw
Magnetic oil drain screw CB12778 / RS600
Oil drain plug with integrated magnet that collects metal shavings from the engine. Suitable for your BMW R nineT / BMW R12. We highly recommend this item! You get a lot of effect for little money here. The integrated magnet in the screw means that significantly more metal shavings are removed from the engine case during an oil change than without the extra magnet.    

€8.90*
Dart Flyscreen Piranha R Nine T
Dart Flyscreen Piranha R Nine T CB11791M / RS600
Dart-Flyscreen Piranha (small) for BMW R Nine T Classic, Pure & Scrambler (Please choose the model in the selection).The stylishly perfect windshield in a slightly smaller version than the Classic version. Easy and quick to install. TOP QUALITY from very high-quality plastic & metal holders. The holders for the flyscreen are black coated. The windshield not only sets a visual accent on the front of the motorcycle, there is also a lightweight windshield that takes the pressure off the chest at high speeds.If a good windscreen is more important than the look, we clearly recommend ordering the Classic version.The Piranha Flyscreen is only available in the black Midnight version. Dimensions Flyscreen: (WxH) : 24.8 x 21.3 cm

€135.00*
Details
Luggage carrier - R12 nineT
Luggage carrier - R12 nineT CB12754 / RS600
Unit Garage tubular steel luggage rack with pillion grab handles and sheared aluminum plate.The frame is also 2mm thick stainless steel tube. A practical carrier for anyone who needs to carry a bit more luggage. Mounting the carrier is very quick and easy.Fits together with the Unit Garage side bag carriers as well as those from the BMW original accessories. The manufacturer specifies a maximum weight load of 10kg. On request, we can supply the carrier together with an aluminum top case (please contact us for this).

€359.95*
Knee pad - R12
Knee pad - R12 CB12755 / RS600
A pair of rubber knee pads for the tank of your BMW R12 from Unit Garage. The pads are supplied with a strong adhesive on the back. This means they can be easily attached to the tank of your R12. On the one hand, they round off the look of the tank (create a nice contrast) and on the other hand, they protect the tank from scratches.

€89.95*
Manifold without cat - BMW R12
Manifold without cat - BMW R12 CB12751.1 / RS600
Design: Steinless Steel
Handcrafted Unit Garage exhaust manifold made of titanium or stainless steel WITHOUT CATALYTIC CONVERTER, suitable for BMW R12. Just the thing for those who want to give their R12 a little more power and, above all, a throatier and louder sound. By eliminating the huge original catalytic converter, the engine gets a little more power and sounds much throatier.In addition, the manifold weighs less than the original.Titanium: - 4.1 kgStainless steel: - 2.15 kg The manifold also looks good. The ugly chrome of the original manifold is gone. The titanium version has very nice visible welds and will turn a little blue in places over time (see pictures). No new mapping necessary:It is not necessary to load new mapping onto the motorcycle or to make any further adjustments. No error message is displayed in the speedometer.

€699.95*
Exhaust bracket washer
Exhaust bracket washer CB12725 / RS600
Elegant CNC-milled aluminum washer from the premium manufacturer Rizoma from Italy. The washer replaces the original exhaust screw on your nineT.

€84.00*
Fork protector - R12
Fork protector - R12 CB12726 / RS600
CNC-milled aluminum crash pads from Rizoma. Unfortunately, crashing your motorcycle is always an unpleasant topic. In the event of a crash, the fork and swingarm of the motorcycle are always the first to come into contact with the asphalt. To protect the fork in the event of a fall, we recommend fitting crash pads to the fork legs. As crash pads often do not look attractive, Rizoma offers the solution here. The Rizoma crash pad is so elegantly finished that it even enhances the appearance of the R12.

€179.00*
Rizoma Namic mirror
Rizoma Namic mirror CB12727M / RS600
Rizoma Namic mirror with E-number. Probably the highest quality and most elegant mirrors in our range. The mirror is made from very high-quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milled structure. You can see and feel the high quality of these mirrors at first glance. Thanks to the ingenious mounting system that Rizoma uses here, the mirror does not protrude so far upwards and look like mouse ears. It runs nice and flat over the handlebars. The shape is a beautifully classic teardrop shape. The mirrors are sold individually. Model specific mounting instructions: An additional adapter is required for all models. BMW motorcycles:The Riz mirror adapter RadialRS + Dynamic BMW is required for mounting on the original mount of BMW models (see accessories in this article). Water-cooled Triumph LC models: An additional, model-specific adapter is required to mount the mirror (see accessories article in this description). 1. adapter "Riz mirror adapter for fittings with hole", which is suitable for all models that have a hole in the fitting ex works for the mirror mount 2. adapter "Riz mirror adapter for fittings with thread", which is suitable for all models that have a thread for mirror mounting on their fittings ex worksThruxton 1200 R / RS - Speed Twin 1200 - Scrambler 1200: These models do not have a mirror mount ex works. In addition to the adapter 2, the adapter mirror adapter "Thruxton R / Speed Twin / Scrambler" is also required Air-cooled Triumph AC models: The "Riz mirror adapter for fittings with hole" adapter is required for all AC models.

€269.00*
Details
Unit Garage - Side bag holder - R12
Unit Garage - Side bag holder - R12 CB12719M / RS600
Unit Garage side bag bracket for all BMW R12 models. Compatible with our rear LED strip.The Unit Garage bag holder is needed to mount a Unit Garage side bag. All Unit Garage side bags from our range fit on the holder. The UG bag holders are made in a beautifully minimalist way so that they are as unobtrusive as possible when the bag is not mounted on the motorbike.The Unit Garage bag system is a very well thought out one. The side bags are simply hooked into and unhooked from the holder with a flick of the wrist. In addition, a lock is integrated in all bags to protect them from theft when mounted. The bag holder is available in 3 versions: 1. single holder: holder for one bag on the right-hand side.2. double holder exhaust below: Holder for two bags, for all R nineT's that have a bottom-mounted exhaust.3. double holder exhaust on top: Bracket for two bags, for all R nineT's with an overhead exhaust. Included in delivery are all fixing materials necessary for mounting.

€209.95*
Details
Engine guard - BMW R12
Engine guard - BMW R12 CB12720M / RS600
Unit Garage aluminum underride guard suitable for BMW R12 models. The underride guard is made of 3 mm thick aluminum and protects the motorcycle from stone chipping and contact when riding off-road. The stone guard is also an advantage when riding on the road. The use of 3 mm aluminum ensures good protection with low weight. The protection also gives the R12 a more solid appearance. The Unit Garage guard is designed to also cover the manifold and the catalytic converter. Everything needed for installation is included in the scope of delivery.

€249.95*
Details
Beeline Moto II - Bar Mount
Beeline Moto II - Bar Mount CB12708 / RS600
The Beeline Moto Bar Mount Kit allows you to mount the Beeline Moto 2 Navigation System on dervers handlebars with different diameters. Fits motorcycle handlebars with 22mm, 25mm or 32mm diameter. Rubber washers included Adjustable head for optimal view of the navigation device

€34.99*
Beeline Moto II - universal Strap Mount
Beeline Moto II - universal Strap Mount CB12709 / RS600
The Beeline Moto RAM Ball Mount Kit allows the attachment of the Beeline Moto navigation system to the common RAM ball systems, as they use many Navigtionssysteme (TomTom or SW.Motech fastening system eg). Fits RAM ball clamp with 1 inch diameter.

€17.99*
Beeline Moto II - Mirror Mount
Beeline Moto II - Mirror Mount CB12710 / RS600
The Beeline Moto Mirror Mount Kit allows you to mount the Beeline Moto 2 Navigation System to a mirror arm. Fits rear view mirror rods with 10-16mm diameter. Adjustable for optimal angle Clamp with rubber to prevent scratches

€34.99*
Beeline Moto II - Case
Beeline Moto II - Case CB12711 / RS600
Practical case to store the Beeline Moto 2 Navi when it is not on the bike. Made of ethylene vinyl acetate copolymer Soft inner lining Lid can be opened by horizontal zipper (all around) With power supply inside, for secure hold of Beeline Moto and charging cable Carabiner hook for attaching to belt, bag, etc.

€17.99*
Legend Gear SLC Luggage Bag Holder - BMW R12
Legend Gear SLC Luggage Bag Holder - BMW R12 CB12705M / RS600
SW-Motech SLC side carrier for BMW R12 models (the holder does not fit on the Cruiser in combination with the short BMW rear). The precise, model-specific development of the SLC side rails allows simple and safe mounting at original mounting points on the vehicle. The Legend Gear LC1/LC2 side pockets can be attached and removed within seconds using a quick-release system or in just a few simple steps, without the driver having to do without a reliable bag attachment. Also very suitable for a variety of pockets which you can then simply screw on the 3 fixing points.    The SLC side rail, individually designed for the BMW R nineT Classic, Urban, Pure, Racer & Scrambler, blends in perfectly with its appearance    Model-specific shape allows easy mounting on one or two sides.    Material: steel tubeadvice    The SLC side rail is also compatible with the universal side bracket for fixing all kinds of things.scope of supply    SLC side rail left    installation material

€100.00*
Details
Motor protection bracket R12
Motor protection bracket R12 CB12703 / RS600
SW-MOTECH Engine Guard BMW R12 Cruiser / nineT The robust stainless steel bracket protects the engine and components from fall damage and scratches. A resilient frame connection ensures high stability, while the high-quality crash bar blends seamlessly into the design of the motorcycle. The use of blasted and electropolished stainless steel offers the advantage over coated steel that damage to the crash bar cannot lead to a loss of corrosion resistance. Reliable protection of critical componentsLoadable frame connectionBlack powder coatedMatching the appearance of the motorcycleScope of delivery: 2 safety guardsmounting materialmounting instructions

€270.00*
CAYO - battery.dokk - Ladegerät
CAYO - battery.dokk - Ladegerät CB12695 / RS600
The smart power adapter for connecting the moto.dokk directly to the vehicle battery via USB-C plug. Quick and easy to connect directly to the battery terminals  switches off when not in use, no battery discharge  no time-consuming search for ignition plus for the connectionYou can charge your smartphone or other devices with the mini USB cable (e.g. in the handlebar area).

€49.90*
Unit Garage manifold without catalytic converter
Unit Garage manifold without catalytic converter CB12670M / RS600
Handmade manifold WITHOUT CATALYST, suitable for all BMW R nineT models. Available in titanium or stainless steel. Just the thing for all those who want to give their nineT a little more power and, above all, a cooler and louder sound. By eliminating the catalytic converter, the machine gets a little more power and sounds significantly throatier. The manifold also looks good. The ugly chrome of the original manifold is gone. In the stainless steel version, the manifold is matt silver. In the titanium version, the manifold has very nice, visible weld seams and turns blue in some places over time (see pictures).

€629.95*
Details
LED headlights - bend lighting - R9T kit
LED headlights - bend lighting - R9T kit CB12659M / RS600
Classicbike-Raisch LED headlight kit with cornering light & daytime running light suitable for all R nineT models that have a classic H4 headlight ex works. Visually and technically superior to the original headlight insert. The headlight turns night into day, you can see the road properly and others can also see you properly.   Kit / assembly:The kit contains everything you need to install the LED headlight insert in the original headlight housing and connect the electrics plug & play WITHOUT any electronic errors in the speedometer. To ensure that there are no error messages, the scope of delivery includes suitable CanBus resistors for the parking light and the main headlight (these both fit into the headlight housing). We also supply illustrated step-by-step installation instructions so that the LED headlight can be easily installed by anyone. Installation takes approx. 15-20 minutes (no soldering required, everything is plugged in).   Functionality:Who hasn't experienced the classic H4 headlights, absolutely inadequate road illumination when driving in the dark. This no longer happens with the LED insert. The light from the headlamp is extremely bright. In addition, the headlight automatically detects when the motorcycle is leaning and then also turns on the outer LEDs to illuminate the bend even better, which ensures even more safety. Optics:The headlight insert also looks great. The clear glass and clean design make the R nineT look a little more elegant and modern from the front. The black insert in particular makes the headlight look very inconspicuously elegant. Daytime running light:When the R nineT is started, only the beautiful daytime running light of the headlight is automatically illuminated. By pressing the headlight flasher (for longer than 1 second), the headlight switches to real low beam.

€599.95*
Details
Expansion tank screws - black
Expansion tank screws - black CB12650 / RS600
Black coated stainless steel screw set for the two expansion tanks (brake & clutch fluid caps) of your BMW. Like all BMW screws, the screws have a Torx head. The screws can be easily replaced individually screw by screw without fluid leaking (straighten motorcycle / reservoir).

€7.95*
Unit Garage valve covers R9T
Unit Garage valve covers R9T CB12640.1M / RS600
Black aluminum valve covers for our BMW R nineT Boxer engines from Unit Garage. These covers are die-cast in a specially produced mold and then painted black to perfectly match the engine of your R nineT. The attached covers (which are available in either black or silver) are CNC-milled from aluminum. The Unit Garage valve covers are a beautiful blend of classic / perforated covers paired with a modern, CNC machined accent.

€1,039.95*
Details
Valve caps - nineT
Valve caps - nineT CB12630 / RS600
A pair of black aluminum valve caps with lasered nineT lettering. The high-quality metal caps with non-slip edges replace the original plastic caps and add a stylish little accent to the wheels. Perfect for all detail-loving R nineT riders.

€14.95*
LSL Classic Spiegel - Paar
LSL Classic Spiegel - Paar CB12626 / RS600
Ein Paar klassische Aluminium Spiegel aus dem Hause LSL.  Die LSL Classic Spiegel kombinieren ein klassisches, rundes Design mit moderner Technik und Verarbeitungsqualität. Das Spiegelgehäuse ist mit knapp 10mm schön flach, aber auch nicht zu flach, weil zu einem klassischem Umbau ein Spiegel auch nicht zwingend maximal flach seien muss.Spiegelgehäuse und Spiegelarm sind in einer schönen, matten Oberfläche (wird durch Glasperlen strahlen erreicht) hergestellt.  Der Spiegelarm hat an der Verschraubung eine sehr praktische Winkel Verstellung eingebaut, das es ermöglicht den Spiegel individuell im Winkel einstellen zu können.Für die Optik ist das ein wichtiges Detail, denn so stehen die Spiegel nicht so weit nach oben ab (was sonst schnell aussieht wie Mickymaus Öhrchen).  ACHTUNG, für manche Modelle werden Modell spezifische Adapter benötigt (einige sind unter den Zubehörartikeln dieser Beschreibung zugeordnet), wenn ihr euch nicht sicher seid, ob ihr welche benötigt oder nicht, ruft uns einfach an wir helfen gerne weiter.    Maße: A/B Breite Kopf: 102 mm C Gesamtbreite: 180 mm D Gesamthöhe: 170 mm Stiellänge: 100 mm bis zum Knick, dann 100 mm bis zum Gelenk Gewicht: 210 g Lieferumfang: 1 Paar inkl., 2x M10x 1.25mm Rechtsgewindeadapter 1x M10x 1.25mm Linksgewindeadapter

€139.95*
%
Icon LED 3-1 tail light / indicator combination
Icon LED 3-1 tail light / indicator combination CB12594 / RS600
A PAIR of Icon aluminum LED 3 in blinker / rear / brake light combination from the Motone brand from England. With E-number & road approval. The very high quality Motone indicators are made of a full metal housing and have an Osram SMD LED insert and have a beautiful, tinted glass.The Osram LED inserts are very bright and ensure that you are always clearly visible. Motone indicators are the only indicators in our range where the cables are encased in a fabric tube and also come with a sleeve to cover the nut/thread. This looks and feels really nice! The indicators have an M8 thread & have a 3.9mm Japan plug at the cable ends. You can find model-specific blinker plugs for your motorcycle under the accessories in this description. The Icon 3 in 1 indicators have a classic bullet / drop design similar to the Motone Pico indicators only slightly larger, for those who don't want indicators that are too small.Dimensions: W 44 x H 87.5 x D 6.6 mm   Classicbike-Raisch tips:Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorcycle, you can also order suitable blinker plugs for your motorcycle (you will find the plugs under the accessory items in this description). Our years of experience have shown that unfortunately there is no rule as to which motorcycle models require a turn signal resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

€99.00* €199.00* (50.25% saved)
Rear mudguard - R9T
Rear mudguard - R9T CB12577M / RS600
GRP rear fender conversion kit including license plate holder, tail light & license plate light (with E-number). Many people want a classic rear mudguard on their nineT. Here is the solution from Unit Garage. A very high quality GRP mudguard that fits with the original seat as well as with all accessory seats from our range. The scope of delivery includes both license plate and blinker holder. Both can, but do not have to be fitted, so this mudguard can also be used with a side license plate holder. There is a suitable plug on the rear light so that the kit can be connected plug & play to the original wiring harness. The white of the cap is the same color (light white) as the Urban GS.

€519.95*
Details
Tire pressure control system
Tire pressure control system CB12558 / RS600
The Motogagdet mo.pressure tire pressure monitoring system is a very practical and also safety gadget for your motorcycle. The kit consists of two valve caps that connect via Bluetooth with your phone / the Motogadget app. The app then shows you the current tire pressure of your tires. In addition, you get a notification on your phone when the tire pressure falls below the specified control value. Who doesn't know it, you forget to check the tires for a few months and when you check them, you are shocked to see how low the tire pressure is. A significantly too low tire pressure is not only bad to drive, it is also dangerous.

€99.00*
MotoIsm Fork Clamps - LED Turn Signal
MotoIsm Fork Clamps - LED Turn Signal CB12550M / RS600
Gebl clamps with integrated LED turn signals.These clamps are perfect for a custom conversion, where it can not find a good position to install conventional turn signals.The two-piece fork clamps must be simply put over the fork and fixed with two screws for installation. The wiring runs integrated in the clamp and provides a tidy and clean look. There are the clamps in 3 different dimensions (Please measure your fork standpipe and order the correct diameter measure), which you can choose in the selection. The turn signals have an E-mark and is approved as a front turn signal. The clamps from MotoIsm (Made in Germany) are made of a high quality carbon fiber reinforced plastic.   Classicbike-Raisch mounting tips & resistors: The company MotoIsm really makes an effort to make the connection of their indicators as simple and customer-friendly as possible.There are adapter cables from Motogadget with which you can connect their indicators directly to the wiring harness (without cutting/soldering plugs or similar). These adapter cables also have built-in resistors which ensure that your R9T has the correct flashing frequency. So there's no need for tedious trial and error. Our recommendation is to order one of these adapters at the same time! You can find the adapters under accessories in this product description.

€159.90*
Details
Kellermann Atto Adapter - Underbar
Kellermann Atto Adapter - Underbar CB12527 / RS600
The Kellermann Underbar Adapter allows you to mount the Kellermann Atto turn signals below the handlebars on all BMW R nineT models. ATTENTION: The adapters are sold SEPARATELY. The underbar adapter replaces the original nut of the brake / clutch lever screw (is exchanged 1 to 1). The adapter then has a hole on the side into which a Kellermann Atto indicator can be inserted. The indicator is then attached using a grub screw integrated in the adapter. Probably the easiest and most inconspicuous way to replace the front turn signals on a BMW R9T. Matching Kellermann Atto turn signals can be found below this description under the accessories.

€24.95*
Drybag tail bag / luggage roll
Drybag tail bag / luggage roll CB12526M / RS600
The SW Motech Dry Back rear bags are very high quality universal luggage rolls that are the perfect companion when you need extra storage space on motorbike tours. Available in 3 different sizes. The practical luggage roll is ideal for all weather conditions, is easy to clean and also serves as a casual travel bag if required. The bottom of the Drybags is firmly welded in, the waterproof outer pocket offers additional storage space for your luggage and things that need to be quickly accessible.The luggage roll is simply attached to the pillion area of a seat or a luggage rack. We recommend lashing straps for this.Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorbike, regardless of the payload. The Drybags are completely waterproof and have a high UV resistance. The new strap arrangement makes it easy to combine with other Drybag models on the pillion seat or luggage rack. - Welded outer pocket- Universal fit for almost all motorbikes- Made of robust 500D PVC- Waterproof, extremely robust luggage roll- Easily compressible due to elastic texture- D-rings allow the bag to be pulled tightly against the motorbike- Integrated handle on the side- Waterproof roll closure and taped seams- Reflective details for increased safety in road trafficScope of delivery:- 1 x Drybag tail bag- 2 x loop straps- 1 x paint protection film- Fitting instructionsDetails:- Material: 500D Polyester- Surface: PVC-coatedSizes: 26 litre version: dimension 50,0 x 26,0 x 26,0 cm / weight: approx. 1,2kg 35 litre version: size 58,0 x 28,0 x 28,0 cm / weight: approx. 1,2kg60 litre version: size 71,0 x 33,0 x 33,0 cm / weight: approx. 1,4kg 

€70.00*
Details
Mirror widening - BMW
Mirror widening - BMW CB12518 / RS600
A PAIR of Sw-Motech mirror extensions, suitable for all BMW R nineT models. For all riders for whom safety and a good view to the rear are important. So that not only your own shoulders are visible in the rear-view mirror: The extension elements provide a significantly improved field of vision by moving the mirrors outwards. Once adjusted and screwed in place, the robust and stylish extensions give the mirrors a secure hold, even at higher speeds and off-road. An ABE is available for many motorbike models. Up to 4 cm height gain, up to 4 cm lateral offsetTo improve rear visibilityEasy mounting on the mirror threadScope of delivery 2 x mirror extensions for handlebar mounted mirrorsFitting instructionsMounting materialDetails Material: aluminiumSurface: anodisedColour: blackTotal weight: approx. 0.3 kg

€60.00*
Injection bar protection
Injection bar protection CB12519M / RS600
A pair of aluminium covers for the injection nozzles for BMW R nineT models. The cover can protect the injection nozzle of your BMW R nineT from damage and is screwed onto the existing fastening points on the vehicle. Specially adapted to the shape of the boxer engine, the cover can also be installed in conjunction with the cylinder guard MSS.07.653.10000/S. Installation without the SW-MOTECH cylinder protector as well as with the milled original BMW valve covers is also possible.

€55.00*
Details
Luggage carrier - R9T
Luggage carrier - R9T CB12502 / RS600
Unit Garage tubular steel luggage rack with pillion grab handles, suitable for all BMW R nineT models. A practical carrier for all those who need to carry some luggage. The mounting of the carrier is very quick and easy.Fits together with the Unit Garage side bag carriers as well as those from the BMW original accessories. The manufacturer specifies a maximum weight load of 5kg.

€269.95*