€0.00*

Foot rest R9T black powder coating

Skip image gallery

€130.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
from €86.00*
from €59.95*
€60.00*
from €34.95*
€255.00*
€3.95*
€45.00*
item number: 211257624
Shop-number: CB11967

Product information "Foot rest R9T black powder coating"

Also the footrest support plate and the heel guard, like most metal parts on the R9T's, have the unsightly die-cast surface, which does not look very noble. But we can also powder coat them black!

Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.

Many would like to have a black footrest. The first consideration would be a completely new detent system, e.g. from LSL or Rizoma, which is clearly the most beautiful solution. But if that is too expensive for you, you can get a cheap alternative by having the carrier plate and the heel protection coated in black, ordering black detents and a black gearshift (you can find suitable articles under the accessories products in this description).

You just send us your two footrest support plates + heel guard right, we sandblast them, stick all parts that have to remain free and coat them black (RAL9005)

The brake light switch is attached to the detent carrier plate with 2 notched nails ex works. These must be drilled out for coating and then hammered in again (you can order new notched nails with the switch, see accessories in this description). If you do not want to do this work yourself, you can order the article "Drill / hammer in notched nails R9T carrier plate" (see accessories in this description).

Duration until you have your part black coated again: approx. 2 - 3 weeks.

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 3
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
BMW R nineT
R nineT /5
R nineT Classic / Roadster EU 3
R nineT Classic / Roadster EU 4
R nineT Classic / Roadster EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
BMW R12
R12 Cruiser
R12 S
R12 nineT
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Rizoma Extrem Footpegs
Rizoma Extrem Footpegs CB11280M / RS0
The round Rizoma "B-PRO" catches are provided with an extra-grip knurling. The plastic cap at the end of the catch is interchangeable. Made from Billet ALuminium ATTENTION! Model-specific catches must also be ordered (see accessories in this description).

€86.00*
Details
LSL Egonia Footrests
LSL Egonia Footrests CB11953.1M / RS0
The LSL Ergonia footrest is made of forged aluminium, finely bead blasted and finely milled on the upper side, resulting in a very noble surface finish. Optically, the footrests are an absolute eye-catcher, the fine but not too pointed teeth provide a light cross ratchet look. With a length of 80mm, the rests offer the perfect compromise between comfort (wide support) and sportiness (not too fast to put on). The rubber insert of the footrests can be easily removed (see photo of the green footrest). Visually, the footrest looks even more radical without the rubber. With rubber perfect for comfort and touring, without rubber for the sporty ride and aggressive look. For mounting on the motorcycle, additional, model-specific adapters are required. Suitable adapters for the different motorcycles can be found in the accessories of this description. Detents and adapters are equipped with ABE!

€59.95*
Details
Notched nails R9T Drill / drive in carrier plate CB11969 / RS0
service: Boring of the original notched nails, which hold the brake light switch to the detent carrier plate and hammering it in again after coating. Notched nails are charged separately (please order separately).

€60.00*
LSL Racing Footpegs sloped
LSL Racing Footpegs sloped CB10727M / RS599
LSL Aluminium Racing Ratchets bevelled and knurled in black & silver. The pegs are nice and short, but still offer a good grip due to their very rough knurling. Just the right thing for a sporty Cafe Racer conversion. For mounting on the motorcycle, additional model specific adapters are required. You will find suitable adapters for the different motorcycles in the accessories of this description. Ratchets and adapters are available with ABE!

€34.95*
Details
Rizoma STREET footpads
Rizoma STREET footpads CB11282M / RS0
The Rizoma "RALLY" footrests are really nice radical cross footrests. Just the right thing for a scrambler conversion! Made from high quality billet aluminum.The footrests give you exactly the grip you need when you're off-road! Especially when you ride standing up.Of course they look perfect for every scrambler conversion!ATTENTION: You have to order model-specific detent holders (see accessories in this description).

€255.00*
Notched nail R9T Brake light switch CB11966 / RS0
Original BMW notched nail to fix the brake light switch to the footrest carrier plate of all R9T models. 2 pieces are needed.

€3.95*
Foot rest R9T black powder coating
Foot rest R9T black powder coating CB12112 / RS0
The gear levers, like most metal parts on the R9T's, have the unattractive die-cast surface, which doesn't look very classy. But we can also coat them with black powder! Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Together with the black coating of your R9T's footrest system (see accessories article in this description), you get a completely black footrest system. You simply send us your gear lever, we sandblast it, tape all the places that have to remain free and coat it black (RAL9005). Duration until you have your part coated black again: approx. 2 - 3 weeks.

€45.00*