Please choose your bike

Handlebar riser - BMW R12 CB12832 / RS0

Handlebar riser for BMW R12 & R12 nineT.Increase of 22mm with ABE (road legal). The handlebar riser for the BMW R12 models raises the original handlebar by 22mm.The increase provides a slightly more upright and more ergonomic seating position. This ensures a more relaxed posture on the motorcycle (which can relieve back, shoulders, arms, etc.) as well as better vehicle control in all situations.The blasted and anodized components fit unobtrusively into the overall appearance of the fork bridge.The risers come with type approval and detailed installation instructions. All necessary mounting materials are included. 22 mm handlebar riser CNC-milled from high-strength aluminum alloy Customized design Black anodized, color and surface finish match the bridge Also available in silver No need to modify the cables Easy to fit For the original handlebar Complete with screw set With ABE

€49.90*

Details

Offset handlebar riser - BMW R12 CB12833 / RS0

Handlebar riser with offset for BMW R12 & R12 nineT.Raise by 25mm + 15mm offset towards the driver - with ABE (road approval). The handlebar riser for the BMW R12 models raises the original handlebar by 22mm. The increase provides a slightly more upright and more ergonomic seating position. This ensures a more relaxed posture on the motorcycle (which can relieve back, shoulders, arms, etc.) as well as better vehicle control in all situations. The blasted and anodized components fit unobtrusively into the overall appearance of the fork bridge. The risers come with type approval and detailed installation instructions. All necessary mounting materials are included. 22 mm handlebar riser CNC-milled from high-strength aluminum alloy Customized design Black anodized, color and surface finish match the bridge Also available in silver No need to modify the cables Easy to fit For the original handlebar Complete with screw set With ABE

€129.90*

Details

Perforated grip tape CB12656M / RS0

That's oldschool! Handlebar grips which are wrapped from genuine leather tape!That was otherwise only possible with a lot of manual work (and high costs) with a upholsterer.Now there is leather tape to wrap for everyone! The tape is equipped with 3M adhesive tape on the inside, so it simply sticks to the handlebar when winding. The tape is simply wrapped directly onto the handlebar & grass grip sleeve (if you don't want the grip so thick), or over the existing grip rubbers.The tape is pre-cut at the ends to fit, so that a nice winding pattern is easily added. We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar articles in this description).Here's a video on how to wrap the ribbon in the best possible way.

€41.95*

Details

Rizoma Grips sport 22mm CB12567M / RS0

Rizoma Sport handles in 22mm made of billet aluminum. With integrated rubber, the soft rubber and the many small nobles, the handles offer a particularly good grip. For BMW R9T models: Extra adapters are required for installation (see accessories in this description).

€80.00*

Details

Handlebar riser R nineT CB12492.1M / RS0

AC Schnitzer handlebar riser for all BMW R9T models with ABE & assembly instructions. The R nineT models don't even have straight flat handlebars ex works. Due to the high seating position on the motorcycle, the handlebars are still a bit too low for many drivers and they would like a more upright, more comfortable seating position.The AC Schnitzer handlebar riser for the BMW R nineT models raises the handlebars by 22 mm.The blasted and silver anodized components fit unobtrusively into the overall picture and provide a more upright and ergonomic seating position than the series.Better vehicle control in all situations, whether on long journeys or in the city.In addition to the improved driving experience, you benefit from a more relaxed posture on your BMW with fewer problems for your back, pelvis, arms, wrists and neck. ATTENTION does NOT fit if a double instrument / speedometer is installed. Handlebar riser 22 mm upwards CNC-milled, high-strength aluminum alloy Adapted design Silver anodized, color and surface adapted to the bridge No modification of the cables necessary Easy assembly Complete with screw set With ABE

€49.90*

Details

Steering head nut cover CNC Milled CB12370.2M / RS0

CNC machined aluminum cover for the steering head nut of all BMW R nineT models. The original Lemkkopf nut of the R9T's is not exactly beautiful. To replace this is quite costly, because the handlebars must be disassembled for this. So we offer you here a very chic and practical cover. It is simply plugged over the steering head nut and covers this completely. The cover is put on it within seconds or pulled off again. The Milled design of the steering head cover is the same as our other Milled Producten (tank emblems, brake reservoir cover ...)

€59.95*

Details

Rizoma Drag Bar Handelbar CB11903M / RS0

The 755mm wide Drag Bar Alu handlebar from Rizoma is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look. The handlebars are really nice flat and straight handlebars, which primarily provides a very sporty and front wheel oriented seating position. Especially the hardly existing crank makes sure that you sit relatively far forward leaned. In addition, the very straight handlebars give every bike a really nice flat line. As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface. All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV. Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.

€125.00*

Details

Rizoma Taperet Handelbar CB11905M / RS0

The Rizoma Taperet aluminum handlebar is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. The Taperet handlebar is a classic Super Bike All Rounder handlebar. The handlebar is available in 3 different versions (different dimensions and offset). See the technical drawings in the fots. If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look. The Taperet handlebars are just the right handlebars for everyone who is looking for a really good everyday handlebar for sporty riding, long tours and cruising. As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface. All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV. Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars. ATTENTION with the MA011 handlebar: This handlebar has a rather narrow clamping area and does not fit all motorcycles (such as on a Speed Twin). Please measure the required area beforehand and compare with the dimensions on the drawing. BMW R12 nineT:The MA006 and MA011 Plug & Play versions are suitable for this model.

€123.00*

Details

Handelbar tape geniune leather CB11591M / RS0

€37.95*

Details

Magura Mx Fat Bar BMW R9T CB11667M / RS0

The Magura Mx handlebar is the handlebar that gives the rider the most control and power over the motorcycle and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also comfortable sitting position.You have to like it in any case to grab wide when driving, otherwise this handlebar is not the right one!The handlebars also give the bike a very cool look due to its straight and slightly crooked line. It almost looks like a motocross or a supermoto.We can only warmly recommend this handlebar! We also drive on our own Scrambler conversion. Just the right thing for everyone who likes to drive sporty and likes the look!Dimensions handlebar (see photo): a: 808 mm b: 135 mm c: 189 mm f1: 120 mm h: 63 mmThe handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description). In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.

€109.95*

Rizoma grips Urlo 22mm CB11383M / RS0

Rizoma Urlo handles in 22mm made of billet aluminum. With integrated rubber, which together with the ergonomic shape ensures optimum grip. For BMW R9T models: Extra adapters are required for installation (see accessories in this description).

€91.00*

Details

Rizoma Grips Legend 22mm CB11385M / RS0

Rizoma Legend handles in 22mm billet aluminum made in classic design. With integrated rubber, which together with the ergonomic shape ensures optimum grip. For BMW R9T models: Extra adapters are required for installation (see accessories in this description).

€92.00*

Details

Rizoma 30 Gradi Grips CB11872M / RS0

Rizoma 30 Gradi handles in 22 mm made of billet aluminium. We at all parts of Rizoma are also the highest quality handles! Only the highest quality materials are used. The new 30 Gradi handles have a very special shape. They are not completely round like most handles, but slightly oval and twisted. This makes them especially good to hold and the ball of the hand has a comfortable contact surface.We have already tested it ourselves and it really feels great! For BMW R9T models: Extra adapters are required for mounting (see accessories in this description).

€84.00*

Details

Rizoma ICON Grips CB11873M / RS0

Rizoma ICON in 22 mm made of billet aluminium. We at all parts of Rizoma are also the handles of the highest quality! Only the highest quality materials are used. The ICON grips have a very high quality rubber pad and light cut-outs for the fingers, which gives a very good grip feeling. For BMW R9T models: Extra adapters are required for mounting (see accessories in this description).

€95.00*

Details

Rizoma Cap Handlebar endweight CB11312.1M / RS0

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

€39.00*

Details

Cover handlebar mount R9T CB11241M / RS0

Cover the original handlebar mount on the R9T when stub is installed.

€84.00*

Details

Cross Bar Handlebar 805mm CB11508M / RS1

The crossbar is slightly flatter, wider and slightly less inclined towards the rider than the original handlebar (the original width of teh R9T handlebar is 780 mm). The handlebars provide a more front-wheel-oriented riding position, giving the rider more control over the front wheel and the motorcycle. The 25 mm more width also gives the rider more control over the motorcycle, resulting in a more active riding experience. Sitting further forward means sportier, but not more uncomfortable! For many riders, this riding position is even more comfortable than an upright riding position. The handlebars are made of aluminum and are supplied with ABE. All cables and wires fit, i.e. the handlebars can be easily replaced. The original handlebar end caps no longer fit (we recommend using the Rizoma handlebar end weights or converting to handlebar end indicators - as on the motorcycle in the pictures / see accessories in this description). The handlebars have a beautiful matt pearlescent finish in both black and silver. In order to be able to mount the original fittings, 2 small holes must be drilled in the handlebars (these must be exactly opposite each other). We offer a drilling template with which these holes can be drilled quickly and easily. See accessories in this description. Attention a 28.6mm Fat Bar clamp is required! Attention, if your motorcycle does not have a Fat Bar handlebar clamp ex works (the handlebar has a diameter of 28mm in the middle and 22mm on the outside), you must also order a Fat Bar handlebar mount. This is the case, for example, with a Street Twin / Speed Twin 900 or the Triumph Scrambler 865.On all BMW R nineT models, Triumph Speed Twin 1200, Street Scrambler / Scrambler 900, the handlebars can simply be replaced with the original handlebars.

€89.95*

Details

Adventure handlebars - 805mm CB12456M / RS1

The Adventure handlebars are just the thing for anyone who wants a handlebar that looks really cool but is still comfortable and attractive to ride. Visually, the handlebars are very similar to the Cross Bar or Magura handlebars. The small but subtle difference lies in the offset. This is because the Adventure handlebars are not as straight as the other two handlebars, but are cranked slightly more towards the rider (which gives you a more comfortable riding position). The handlebars are also a little higher. The perfect compromise between looks and functionality. The handlebars provide a more front-wheel-orientated riding position, giving the rider more control over the front wheel and motorbike. ATTENTION: This handlebar is a FatBar handlebar. This means it is 28mm in the centre and 22mm on the outside. The handlebars can be installed on all BMW R nineT / R12 nineT motorbikes (no lines or cables need to be changed).On most Triumph motorbikes, the handlebar clamp must be changed to 28mm. On Triumph models with 1" handlebars, the fittings must also be modified. If you have any questions, please contact us. The handlebars are made of aluminium and are supplied with ABE. All cables and wires are sufficient (i.e. the handlebars can simply be replaced). The original handlebar end caps will no longer fit (here we would recommend using the Rizoma handlebar end weights or converting to handlebar end indicators. See accessories article in this description). In both black and silver, the handlebars have a beautiful, matt bead-blasted surface. Dimensions: Width: 805mm / Height: 77mm / Depth: 114mm / Clamping range: 146mm / Grip tube length: 220mm

€89.95*

Details

Alu Handlebar Fat Bar 760mm BMW R9T CB11668M / RS1

The Fat Bar handlebar is as wide as the original BMW R9T handlebar. However, it is a bit flatter and grader than the original. So you get a more front wheel oriented seating position and optically a flatter line.The Fat Bar is similar to the Cross Bar: same height, a bit narrower and a bit more cranked to the driver.Dimensions: 780mm wide 70mm high 155mm offset.The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description).In black as well as in silver the handlebars have a nice, matt pearl blasted surface. In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.

€89.95*

Details

Rizoma Retro Racer Handlebar CB11897 / RS2

Rizoma Race Retro handlebars with TÜV part certificate. This classic M handlebar from Rizoma is a fat bar handlebar, which means that it has 28.6mm in the middle (at the handlebar clamp) and goes down to 22mm on the outside. With the handlebars the bike gets a really nice and flat line, which provides a sporty riding position. Especially on the Triumph Speed Twin the handlebars look really good (see photos). With the handlebars the bike gets a much more sporty and front wheel oriented seating position. We also recommend ordering the stylish black Rizoma handlebar clamps (which are also available in different heights) for the Triumph Speed Twin. See accessories in the description. Also on the BMW R nine T models the handlebars cut a really good figure and make every nine T into a real Cafe Racer! The original handlebar end weights can not be used anymore. We recommend the Rizoma Cap end weights (see accessories).

€205.00*

Nakedbike Handlebar 790mm CB11509M / RS2

The Naked Bar lies between the original handlebar and the CrossBar a little bit flatter than the original one & slightly wider (790mm) than the original one (original width is 780mm). However, the handlebar does not rise as steeply to the ends as the original one. This makes for a better line (because the handlebars look nice and straight) and also for a better riding feeling.In our opinion, this is the best handlebar for the R9T for a good driving experience. The handlebar comes closest to the well known Roadster handlebar which we use a lot for the Triumph models.The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily replaced. The original handlebar end caps don't fit anymore (here we would recommend to use the Rizoma handlebar end weights or to convert to handlebar end indicators like on the motorcycle in the pictures / see accessories article in this description).Both in black and in silver, the handlebar has a beautiful matt pearl blasted surface. In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.

€89.95*

Details

Handlebar Tour X-Bar CB10633M / RS3

Tour X-bar handlebar XB 3 Dimensions: 780x200 x 85 The perfect allrounder handlebar for all R9T´s . You sit much more relaxed on the motorcycle, making it much more suitable for touring. In addition, the bike is more controllable & rideable as you have more feel to the front wheel. This handlebars does not choose as much from the original as the other two handlebars we offer. However, it offers a much more comfortable grip due to its more active cranking. The handlebar is made of aluminium and comes with ABE. All cables and pulls are sufficient (i.e. the handlebars can easily be exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description). In black as well as in silver the handlebars have a nice, matt pearl blasted surface. In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.

€89.95*

Details

Lenkerverlängerung CB10636.2 / RS3

Design: 22mm Alu Lenker

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.

€34.95*

Lenkerverlängerung CB10636.3 / RS3

Design: 1" Alu Hnadlebar

€34.95*

Steering wheel extension CB10636.4 / RS3

Design: 22mm & 1" Stainles Steel Handlebar

For all Fatbar Handlebars (R9T & Scrambler) For all Fatbar accessories handlebars as used on all R9T models (does not fit the original handlebar) The price is for one pair.

€34.95*

Rizoma Stub R9T Classic CB11240 / RS4

An absolute must for anyone who wants to make his R9T a real CafeRacer. Because this is simply a mute bucket, there is no way around! These give the R9T a nice flat and coherent line, as it is for a CafeRacer. The highest quality in the processing and the finest material is used here by Rizoma in the stumps. Of course with TÜV certificate. If you mount the stubs, we recommend to order the caps for the original handlebar mount. This makes the original fork bridge look as if it were without recordings. (see accessories)

€475.00*

New

Rizoma Cap Handlebar endweight CB12903 / RS5

€34.95*

Details

Superbike Kit R Nine T Racer CB11792 / RS5

Ac Schnitzer Superbike handlebar conversion kit for BMW R Nine T Racer Many R9T Racer riders complain about the uncomfortable seating position of the Racer. This is because the R Nine T has a rather long fuel tank and the stubs sit quite far forward. The ergonomics of the R9T are simply not optimal for a stub handlebar.With the Superbike Kit for racers, the problem is a thing of the past! Absolutely comfortable sitting position & more control over the front wheel, which gives a much more active riding feeling and which together with the handlebar of the half shell remains completely intact (the handlebar does not destroy the overall line of the bike as you can see in the photos). An absolute must for every country road and curve "Racer"! The increased comfort is achieved by a much more upright sitting position, which should eliminate pain in the back and wrists.Seat position compared to the original stumps: 11cm higher / 6cm closer to the rider / 4cm wider (more leverage, more control over the front wheel). The kit will be delivered including parts certificate & assembly instructions.To get an overview of the installation effort, you can download the installation instructions under Downloads in this article. Classicbike-Raisch Tip:Who wants to build a real naked bike from his R nineT Racer also optically, we recommend our KRT - LED Thunderbolt headlight kit. Then you can remove the fairing and has the look of a normal R9T. The kit can be found under the accessories in this description.

€549.00* €563.20* (2.52% saved)

Comfort stub R9T Racer CB11479 / RS6

The conversion includes a ready-to-mount clip-on handlebar KIT including a new CNC-milled, upper triple clamp in gp Racing style and all additional attachments required. After mounting, the handlebar stems are about 5 cm higher than the standard version. The handling also improves because the entire handlebars increase by about 8 cm in width. This results in a much more comfortable, but still sporty seating position on the motorcycle. All attachments are high quality black anodized and come with parts certificate and mounting instructions. Thus, nothing is in the way of an entry in the vehicle documents

€509.00*

Rizoma handlebar weight for mirror CB11310M / RS9

High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually interchangeable, if you get scratches on a wall or so). The weights fit into any high-end accessory handlebar from 22mm to 1 "since different adapters are included in the scope. The handlebars are also suitable for attaching / clamping some Rizoma handlebar mirrors. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

€59.00*

Details

LSL Handlebar weight Retro CB12020M / RS10

These chic end weights of the brand LSL fulfill several functions. On the one hand, they serve as a chic handlebar end to the other, they serve as a handlebar widening to mount all handlebar end mirrors that have a clamping diameter of 29.8mm. Who wants to use the weight only as a handlebar end and not for mounting mirrors, we recommend the matching handlebar weight ring to order (see accessories in this description). The weights are equipped with universal expansion dowels, which allow them to mount in almost all common accessory handlebars. Fits all handlebars with an inner diameter of 12 - 22mm. The weights are fine glass bead blasted before anodizing, giving them a very classy, slightly matte finish. In addition, they are supplied with a small cap, which comes into the clamping screw in front of head, which hides the screw head. Dimensions: Handlebar weight Ø: 36.6 mm Width: 20.5 mm Holder for handlebar end mirrors with outer clamp: Diameter: 29.8 mm Width: 12 mm Weight: 72 g Scope of delivery: 1 pair, incl. mounting material 2 x clamping sleeves each with Ø 12 and 16 mm 2 x spacer sleeves each with Ø 14, 18 and 21 mm 2 x M6 central screws2 x M6 cone nuts __________________________________________________ Note for mounting on BMW R9T models with original handlebars: The R9T original handlebars have a M10 internal thread. This can be drilled to 12mm, then it is possible to use the weights in combination with the original handlebar.

€29.95*

Details

Lenkerverlängerung CB10636.1 / RS10

Design: BMW R9T

€34.95*

R9T Handlebar Covers CB11127 / RS11

Serve as a cover for the handlebars on the original fork bridge of the R9T. To cover when a mute bucket is installed.

€44.95*

Throttle Grip Aid CB11795 / RS20

The throttle grip aid is very practical for longer journeys at constant speed (e.g. motorway journeys). You just put your hand (ball of your thumb) on the throttle grip help and the throttle position is held. Really very pleasant. The part is put within a few seconds on the grip and also removed again. For handles with a diameter of 30-35mm (these are most handles).

€5.95*

Superbike FatBar SW, SI & Gold CB11050M / RS20

LSL Superbike handlebars Fatbar Flat for crown 127T071. Measurements: 740x150x60

€89.95*

Details

Handlebar Leather Toolbag CB11883M / RS50

Real leather bag for mounting on cross handlebars or a handlebar cross brace. Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your pocket. All the time you grab your leg to make sure that nothing falls out of your pocket. With this small bag, the problem is solved. It also gives the handlebars of your bike a really nice look. Only works with bolted handlebar struts, not with cross handlebars with welded-in handlebar struts.

€99.95*

Details

Handlebar Weights Flat Cap for Alu Handlebar CB10924M / RS101

LSL handlebar weights chrome or black for 1", 22mm and FatBar (all R9T models) Alu handlebar pair. The internal thread of the original handlebar must be removed or drilled out.

€24.95*

Details

Handlebar extension - BMW CB12880 / RS600

Handlebar extension for mounting handlebar end mirrors on the original handlebars of BMW motorbikes These handlebar adapters can be screwed directly into the original handlebars of your BMW. The Motone and other handlebar end mirrors can then be clamped onto the adapters.The adapters are sold as a pair.

€39.95*

Leather cable tie set CB12477M / RS600

A set of stylish leather cable ties. These cool leather straps are the stylish alternative to the original rubber / plastic clamps or cable ties that are mostly used on motorcycles.Who does not know it, the annoying lines & cables on the motorcycle, which actually no one wants to have but unfortunately are mandatory. Then these must also be attached to the handlebars or the frame of the motorcycle, for example, and this is usually unsightly with plastic holders.With the leather cable ties, the problem is now done! Because the straps are not only practical as a cable tie, but they are your bike also skillfully on. The devil is in the details. The leather straps have a strong adhesive 3M tape on the back, with which you can attach any cable / line perfectly and securely. A set consists of 4 straps.

€32.95*

Details

Handprotektoren-Kit BMW CB12186M / RS600

Die SW-Motech Handprotektoren-Kit schützt die Lenkerarmaturen deines Bikes bei Stürzen und deine Hände vor Witterungseinflüssen wie kalter Luft und Regen. Die Basis bildet ein stabiler Aluminiumbügel, an dem die Sport Handschalen befestigt sind. Der schlagfeste Kunststoff der Schalen ist flexibel und bietet besten Schutz vor äußeren Faktoren. Die schlanke Form und die mattschwarze Optik sorgen außerdem für ein stillvolles Designelement am Lenker.Genau das richtige für alle BMW Fahrer, die ihrem Motorrad einen leichten Off Road / Motocross Look verleihen wollen. Sehr praktisch sind Handguards für Fahrer, die bei Wind & Wetter fahren, sie haltne die Hände trockener und sorgen für Windschutz, damit die Hände nicht kalt werden. Es gibt die Handguards in zwei Ausführungen: Sport: Die etwas kleinere Schalen haben.Adventure: Größere Schalen wie bei einer klassichen Enduro. Stabiler geschlossener Aluminiumrahmen Zeitloses Design mit Handschalen aus schlagfestem Moplen-Kunststoff Großdimensionierte Handschalen bieten besten Schutz vor Witterungseinflüssen Einfache Montage der Handschalen an den Aluminiumbügeln, bei Bedarf austauschbar Lieferumfang 2 x BBSTORM Handprotektoren-Schalen, links und rechts 1 x Barkbusters Handprotektoren Montage-Kit, links und rechts Anbauanleitung Montagematerial

€160.00*

Details

Drilling template fittings / handlebars R9T CB11752 / RS600

When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place. Since it is not easy to drill a hole in round material (like a handlebar) and these have to be exactly opposite, we offer this drilling template. This is simply put around the handlebar and screwed. So it is very easy to drill the two holes exactly opposite each other.

€49.95*

Rizoma swept-back Riser CB11531 / RS600

CNC milled handlebar risers for BMW R9T Scrambler & R9T Urbang GS. These handlebar mounts not only look much better than the original ones, they also provide a more ergonomic and comfortable seating position. By mounting the risers the handlebars are 10mm higher and 30mm closer to the rider (all trains fit further).For a particularly beautiful look we recommend to order the upper single clamps or the bone from Rizoma in addition (see accessories in this description).The risers are TÜV approved.

€244.50*

Rizoma handlebar clamp R9T CB11532M / RS600

A set of CNC milled single clamps for all R9T models in silver. Ensure a cleaner look than with the large original clamp.

€104.00*

Details

Handlebar stay Crossbar CB12606 / RS601

Aluminum handlebar brace, suitable for some LSL Fat Bar handlebars from our range. The brace gives your motorcycle a classic scrambler / offroad look. Suitable for LSL aluminum handlebars: 128AX: A00 / A01 / A02 / A03 / A04 (all matching handlebars can be found under accessories in this product description).

€24.95*

Stylish handlebars and fittings for your BMW Heritage Line motorbike: comfort & control

Give your BMW Heritage Line motorbike, be it the R nineT, R9T, R12, R12 nineT, R nineT Scrambler or R nineT Pure, the perfect look and improved riding comfort with our high-quality handlebars and fittings! The right handlebars are crucial for a relaxed and controlled ride. Discover our selection of handlebar risers to help you find the optimum riding position. Robust clamps ensure that everything stays securely in place. Comfortable grips and stylish end caps not only set visual accents, but also improve your riding experience. Each accessory is specially developed for the BMW Heritage models to harmoniously combine functionality and design. Make every ride a special experience by treating your bike to the right handlebar accessories!