Naked Bike Lenker 790mm

LSL

€99.95*

€49.95*

€54.00*

€34.95*

€24.95*

€89.95*

Prices incl. VAT plus shipping costs

Colour

item number:	128AX02SI
Shop-number:	CB11509M

Product information "Naked Bike Lenker 790mm"

The Naked Bar sits between the original handlebars and the CrossBar; it is slightly flatter than the original and marginally wider (790 mm) than the original (the original width is 780 mm). However, the handlebars do not rise as steeply towards the ends as the original ones. This creates a more attractive line (as the handlebars appear nice and straight) and also improves the riding experience.

In our opinion, this handlebar is the best for the R9T in terms of riding comfort. It is also the closest match to the well-known Roadster handlebar, which we use extensively on Triumph models.

The handlebars are made of aluminium and come with ABE approval. All cables and wires are long enough (meaning the handlebars can be swapped out easily. The original handlebar end caps will no longer fit – in this case, we’d recommend using Rizoma handlebar end weights or converting to handlebar-end indicators – as on the motorbike in the pictures / see the accessories section in this description).

Available in both black and silver, the handlebars feature an attractive, matt bead-blasted finish.

To fit the original instruments, two small holes must be drilled into the handlebars (these must be positioned exactly opposite each other). We offer a drilling template to make drilling these holes quick and easy. See the accessories section in this description.

Models BMW R nineT:	R nineT /5 EU 4 R nineT Classic EU 3 R nineT Classic EU 4 R nineT Pure EU 4 R nineT Scrambler EU 4 R nineT Scrambler EU 4. R nineT Urban GS EU 4

BMW R nineT	R nineT /5 R nineT Pure EU 4 R nineT Pure EU 5 R nineT Roadster EU 3 R nineT Roadster EU 4 R nineT Roadster EU 5 R nineT Scrambler EU 4 R nineT Scrambler EU 5 R nineT Urban GS EU 4 R nineT Urban GS EU 5
BMW R12	R12 R12 G/S R12 S R12 nineT

Zubehörartikel

Motogadget Handlebar Indicator M.Blaze Disc CB11132.2M / RS600

Noble handlebar end turn signals from Motogadget. The housing is CNC machined from aluminum. Because the indicators are so flat and have a clear glass, they are as good as not noticeable. Nestle by the appropriate size very perfectly to most handlebar grips. Are very visible from the front and are also seen from behind (for behind, however, they are not recognized in the StvO as turn signals). Fit all handlebar sizes accessory handlebars with an Inndendurchmesser of 14mm - 21mm. In most original handlebars fit the turn signals unfortunately not. For BMW R nineT models, however, there are suitable adapters for the original handlebar (see accessory article in this description). More elegant and cleverly solved you can not install a turn signal for the front. The aluminum housing in conjunction with the clear glass pane is an absolute eye-catcher.To get a particularly clean front, we recommend the Motogadget turn signals in combination with the perfectly matching handlebar end mirrors from Motogadget to combine. Matching adapters for this, in order not to have to move the fittings on the handlebars, are of course also available from Motogadget (everything can be found under the accessories in this description).If you want it to be perfect, you can order the matching handlebar grips (in the same diameter as the turn signals) from Motogadget. The optical turn signal counterpart for the rear (Motogadget Pin) can be found in the accessories of this description. For easy installation of the turn signals, we recommend model-specific turn signal plugs, so that nothing has to be cut off the original wiring harness.

From €99.95*

Details

Drilling template fittings / handlebars R9T CB11752 / RS600

When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place. Since it is not easy to drill a hole in round material (like a handlebar) and these have to be exactly opposite, we offer this drilling template. This is simply put around the handlebar and screwed. So it is very easy to drill the two holes exactly opposite each other.

€49.95*

Rizoma Cap Handlebar endweight CB11312.1M / RS0

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

From €54.00*

Details

Lenker Endgewichte - Slim CB12903 / RS5

Slim handlebar end weights – flat and discreet, suitable for all handlebar sizes Our Slim Handlebar End Weights are the perfect solution for anyone looking for a clean and unobtrusive handlebar finish. The design is deliberately minimalist, so the end weights don’t draw the eye, yet still offer a high-quality look. The set comes complete with a range of clamping sleeves. This allows you to fit the weights to almost any hollow-core handlebar – whether it’s 22 mm, 1 inch or a Fat Bar. Suitable for: Handlebars with an internal diameter of approx. 12–14.5 mm Handlebars with an internal diameter of approx. 17–19.5 mm The Slim End Weights give your handlebars a clean and cohesive finish – without any unnecessary frills.

€34.95*

Details

Handlebar stay Crossbar CB12606 / RS601

Aluminum handlebar brace, suitable for some LSL Fat Bar handlebars from our range. The brace gives your motorcycle a classic scrambler / offroad look. Suitable for LSL aluminum handlebars: 128AX: A00 / A01 / A02 / A03 / A04 (all matching handlebars can be found under accessories in this product description).

€24.95*

Naked Bike Lenker 790mm

Product information "Naked Bike Lenker 790mm"

Stellen Sie eine Frage