BMC Airfilter Cleaning Kit
€22.95*
Pick your accessory
€849.00*
€1,699.00*
€1,039.00*
€1,699.00*
€1,899.00*
€1,899.00*
€1,899.00*
€1,039.00*
| Product number: | CB11605 |
| item number: | BMC-WA200-500 |
Product information "BMC Airfilter Cleaning Kit"
BMC cleaning kit for air filters with cleaner and oil.
Since the BMC air filters we sell are made of a metal mesh, after a certain mileage, they do not have to be replaced like a simple paper filter. The metal filters can simply be cleaned with the special cleaner and then re-oiled.
| Triumph LC models from 2016: |
|
|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
|
|---|
600
600
600
600
There aren't any asked questions yet.
Zubehörartikel
PowerKit Street Twin & Street Cup Stage 1
CB11469
/ RS0
€849.00*
PowerKit Street Twin & Street Cup Stage 1. consisting of: Sport air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping).Unfortunately, you don't get more top performance, you lose almost 1 HP in the seats to the series, but you win almost 3 NM torque at the top. However, in the important speed range of 3200 - 5200 rpm you are always above the series (at 4200 rpm + 4.7 NM and + 4 HP. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. This saves you from having to make your own adjustments on third-party test benches, which are very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm (from series 6500 rpm to 6800 rpm), which is in the absolutely healthy range.This kit is of course not road legal and only suitable for race track operation. It is relatively easy to install it yourself. The tank only has to be dismantled to connect the Powercommander. The installation in our house takes approx. 1.5 hours = € 127,-.
PowerKit Street Twin & Street Cup Stage 3
CB11471
/ RS0
€1,699.00*
PowerKit Street Twin & Street Cup Stage 3.
Consists of: Raisch Racing camshaft, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.The series camshaft of the 900er models has very tame timing, you have a high torque at quite low revs, but from 4500 rpm the torque and therefore also the power kinks strongly. With our Racing camshaft you achieve a significant increase in power + 10.5 hp and + 2.5 NM at the peak values. You have to leave some springs, below 3300 rpm you lose a bit. However, this range is not really full throttle relevant and therefore one runs over the "power loss" without noticing it (look at the stage 4 +, here the lower speed range is stronger). Above 3400 rpm you have a clear increase in performance. At 6800 rpm you even achieve a plus of 16 hp and 16.5 NM. Finally it's a pleasure to turn the 900cc engines a bit. Instead of air there is now fire, if you want to be sporty on the road, or need reserves for overtaking. But also the important, medium speed range around 4000-4500 rpm is noticeably stronger than the series, see also performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). Our mappings have been determined with a lot of time on the test bench. These mappings are immediately uploaded to the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on strange test benches which are also very expensive. In addition to the increase in performance, this also results in a more harmonious and finer engine run. We increase the speed limit by 1000 rpm (from series 6500 rpm to 7500 rpm), which is in the absolutely healthy range (the 1200 motors are basically identical in construction and rotate just as high). This kit is of course without road approval and only suitable for race track use. With this kit the camshaft has to be mounted and the valves adjusted, which takes about 3,5 hours. Installation time 5 hours.
This kit is primarily intended for riders who don't want the bike to get louder, but still don't want to miss out on the power plus of the camshaft.
A note for mounting the camshaft is included.
PowerKit Thruxton 1200 Stage 2
CB11289
/ RS0
€1,039.00*
Powerkit Thruxton 1200 Stage 2. consisting of: X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping). Power plus + 16 Nm torque and 8 HP. In the important speed range of 4600 - 4700 rpm an increase of 11.5 HP and 17NM can be achieved. See diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). These mappings are immediately loaded onto the Powercommander, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive. In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm, which is within the absolutely healthy range. This kit is of course not road legal and only suitable for race track operation. For installation, the tank, the manifold system and a frame girder must be dismantled. Installation costs in our house 3 hours.
PowerKit Bonneville T120 Stage 3
CB11461
/ RS0
€1,699.00*
Powerkit Bonneville T120 1200 Stage 3. consisting of: Raisch Racing camshaft, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.Power plus + 7.5 Nm torque and 14 hp. At 4600 rpm you even achieve a torque plus of 14 NM and at 6600 rpm even a plus of almost 15 HP. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).We have designed our racing camshaft so that you don't lose any power at all at the bottom and in the middle. But there is an additional scoop on top and finally it is fun to turn the Bonni up to the limiter.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 500 rpm (from series 6800 rpm to 7300 rpm), which is in the absolutely healthy range.With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Installation time 5 hours.This kit is primarily intended for riders who don't want to have the motorcycle louder, but still don't want to do without the performance advantage of the camshaft.A note on mounting the camshaft is included in the scope of delivery.This kit is of course not road legal and only suitable for race track operation.
PowerKit Street Twin & Street Cup Stage 4 +
CB11474
/ RS0
€1,899.00*
PowerKit Street Twin & Street Cup Stage 4 +. It consists of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.The standard camshaft of the 900 models has very tame control times, so you have a very high torque at quite low revs, but from 4500 rpm the torque and therefore also the power is strongly reduced. With our Racing Camshaft you achieve a significant increase in performance + 13 HP and + 7 NM at the peak values. The power loss below approx. 3200 rpm as with Stage 3 and 4 is not achieved with Stage 4+. You're slightly below the series, but that's not worth mentioning. Above 3100 rpm there is a significant increase in performance. At 6800 rpm you even reach a plus of almost 19 hp and a good 19 NM.(The data in the diagrams are rear wheel measurements, see general description in the product group). .Finally it is a pleasure to turn the 900 engines a bit. Instead of air fire comes now, if one would like to be sporty on the way, or reserves for overtaking needed. But also the important, medium speed range around 4000-4500 rpm is noticeably stronger than the series, see also performance diagram.This kit contains NOTHING in addition to the Stage 4 Kit. The Stage 4 + Kit for the 900 models should show what open mufflers can do in addition to the Stage 4 Kit. In this case we tested the HBS 605, which gave us very good results. But also other mufflers, like the Remus with our Racing DB Killers bring similar increases. You can find the corresponding mufflers under the category mufflers in our shop, but we are also happy to advise you. Of course, we have the appropriate mapping ready and can install it directly on the Powercommander. The open mufflers make the sound even more pithy, but depending on the muffler it remains as socially acceptable as possible.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 1000 rpm (from series 6500 rpm to 7500 rpm), which is in the absolutely healthy range (the 1200 motors are basically identical in construction and turn just as high).This kit is of course not road legal and only suitable for race track operation. additional With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4 = 7 hours.A note on mounting the camshaft is included in the scope of delivery.
PowerKit Bonneville T120 Stage 4 +
CB11463
/ RS0
€1,899.00*
Powerkit Bonneville T120 1200 Stage 4 +. It consists of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.Power plus + 12 Nm torque and almost 17 hp. At 4600 rpm you even achieve a torque plus of 19.5 NM and at 6600 rpm even a plus of 17 HP (The data in the diagrams are rear wheel measurements, see general description in the product group).This kit contains NOTHING in addition to the Stage 4 Kit. The Stage 4+ Kit for the Bonni T120 should show what open mufflers can do in addition to the Stage 4 Kit. In this case we tested the HBS 705, which gave us very good results. But also other mufflers, like the Remus with our Racing DB Killers bring similar increases. You can find the corresponding mufflers under the category mufflers in our shop, but we are also happy to advise you! Of course, we have the appropriate mapping ready and can install it directly on the Powercommander. The open mufflers make the sound even more pithy, but depending on the muffler it remains as socially acceptable as possible.We have designed our racing camshaft so that you don't lose any power at all at the bottom and in the middle. But there is an additional scoop on top and finally it is fun to turn the Bonni up to the Bregrenzer.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 500 rpm (from series 6800 rpm to 7300 rpm), which is in the absolutely healthy range. This kit is of course not road legal and only suitable for race track operation.With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4 = 7 hoursA note on mounting the camshaft is included in the scope of delivery.
PowerKit Thruxton 1200 Stage 4
CB11291
/ RS0
€1,899.00*
Powerkit Thruxton 1200 Stage 4 Consists of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket. Power plus + 16 Nm torque and 14 HP. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). We have designed our racing camshaft so that you don't lose any power at all at the bottom and in the middle. But there is an additional scoop on top and finally it is fun to turn the thruxton up to the Bregrenzer. Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately installed on the Powercommander by us, so that a Plug&Play solution results. Thus one saves oneself an own tuning on foreign test stands which are also very expensive. In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm, which is within the absolutely healthy range. This kit is of course not road legal and only suitable for race track operation. additional With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4: 7hours.A note on mounting the camshaft is included in the scope of delivery.
PowerKit Bonneville T120 Stage 2
CB11460
/ RS0
€1,039.00*
Powerkit Bonneville T120 1200 Stage 2. Consists of: X-pipe, sports air filter, Raisch milled air cleaner cover (with largePowerkit Bonneville T120 1200 Stage 2. consisting of: X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping). Power plus + 7.5 Nm torque and 9 hp. In the important speed range of 4300 - 5200 rpm an increase of 9.5 hp and 14.5 Nm can be achieved. See diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Unfortunately, the Stage 2 Kit is not a special upgrade to Stage 1 because of the series of silencers, which do not offer enough throughput. If open mufflers are also used, the increase is greater (torque and power). The X-Pipe makes the sound more powerful.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive. In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 500 rpm (from series 6800 rpm to 7300 rpm), which is in the absolutely healthy range.This kit is of course not road legal and only suitable for race track operation. For installation, the tank, the manifold system and a frame girder must be dismantled. Installation costs in our house 3,0 hours = € 225,-.r air intake), Power Commander 5 (with ignition timing + special RAIS mapping). Power plus + 7.5 Nm torque and 9 hp. In the important speed range of 4300 - 5200 rpm, you even get an increase of 9.5 hp and 14.5NM . See diagram (The indications in the diagrams are rear wheel measurements, see general description in the product group). Unfortunately, the Stage 2 Kit is not a special upgrade to Stage 1. This is due to the series silencers, which do not provide enough throughput. If you also use open mufflers, the increase is greater (torque and power). The sound gets rougher through the X-Pipe. Our mappings were elaborately determined with a lot of time on the test bench. These mappings will be uploaded to the Powercommander right away, resulting in a plug & play solution. Thus one saves oneself an own tuning on strange test stands which are also very expensive. In addition to the performance plus results in a total harmonious and finer engine running. The speed limit is increased by 500 rpm (from 6800 rpm to 7300 rpm), which is in the absolutely healthy range. Of course, this kit is street legal and only suitable for race track operation. For installation, the tank, the manifold system and a frame support must be dismantled. Installation costs in our house 3,5 hours.
PowerKit Bonneville T100 Stage 2
CB11465
/ RS0
€1,039.00*
PowerKit Bonneville T100 Stage 2. consisting of: X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping).Unfortunately, you don't really gain more top performance, but you gain a good 4 NM torque at the top. However, in the important speed range of 2900 - 5400 rpm you are always above the series at 3900 rpm + a good 8 NM and + 4.6 hp. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). The X-Pipe makes the sound more powerful.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. This saves you from having to make your own adjustments on third-party test benches, which are very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm (from series 6500 rpm to 6800 rpm), which is in the absolutely healthy range. This kit is of course not road legal and only suitable for race track operation.It is relatively easy to install it yourself. For installation, the tank, the manifold system and a frame girder must be dismantled.Installation costs in our house 3,5 hours.
PowerKit Bonneville T120 Stage 4
CB11462
/ RS0
€1,899.00*
Powerkit Bonneville T120 1200 Stage 4. consisting of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.Power plus + 6.5 NM torque and 14 hp. At 4700 rpm you even achieve a torque plus of 14 NM and at 6600 rpm even a plus of almost 15 HP (The data in the diagrams are rear wheel measurements, see general description in the product group).Unfortunately, the Stage 4 Kit does not bring any changes to Stage 3, except a more powerful sound through the X-Pipe. This is due to the series of silencers, which do not offer sufficient throughput. If you also use open mufflers, the increase is greater (torque and power), here we offer our Stage 4+ Kit for the Bonneville T120.We have designed our racing camshaft so that you don't lose any power at all at the bottom and in the middle. But there is an additional scoop on top and finally it is fun to turn the Bonni up to the Bregrenzer.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 500 rpm (from series 6800 rpm to 7300 rpm), which is in the absolutely healthy range.Additional With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4 = 7 hoursA note on mounting the camshaft is included in the scope of delivery.This kit is of course not road legal and only suitable for race track operation.
PowerKit Bonneville T100 Stage 4
CB11467
/ RS0
€1,899.00*
PowerKit Bonneville T100 Stage 4. consisting of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.The standard camshaft of the 900 models has very tame control times, so you have a very high torque at quite low revs, but from 4500 rpm the torque and therefore also the power is strongly reduced. With our Racing Camshaft you achieve a significant performance increase + 12 HP and + 4,5 NM at the peak values. A little feathering is necessary, below 3200 rpm you lose a little. However, this range is not really relevant at full throttle and thus the "power loss" is passed without being noticed (look at stage 4 +, here the lower speed range is stronger). Above 3200 rpm, there is a significant increase in performance throughout. At 6800 rpm you even achieve an increase of 16 hp and 16 NM.Finally it is a pleasure to turn the 900 engines a bit. Instead of air fire comes now, if one would like to be sporty on the way, or reserves for overtaking needed. But also the important, medium speed range around 4000-4500 rpm is noticeably stronger than the series, see also performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Apart from the more powerful sound through the X-Pipe, the difference between Stage 4 and Stage 3 is not very big. In some areas you are 1-2 hp above stage 3, which is not really noticeable. This is due to the series of silencers, which do not offer sufficient throughput. If you also use open mufflers, the increase is greater (torque and power), here we offer our Stage 4 + Kit.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 1000 rpm (from series 6500 rpm to 7500 rpm), which is in the absolutely healthy range (the 1200 motors are basically identical in construction and turn just as high).This kit is of course not road legal and only suitable for race track operation. additional With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4 = 7 hours.A note on mounting the camshaft is included in the scope of delivery.
PowerKit Bonneville T100 Stage 1
CB11464
/ RS0
€849.00*
PowerKit Bonneville T100 Stage 1. consisting of: Sport air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping).Unfortunately, you don't get more top performance, you lose almost 1 HP in the seats to the series, but you win almost 3 NM torque at the top. However, in the important speed range of 3200 - 5200 rpm you are always above the series (at 4200 rpm + 4.7 NM and + 4 HP. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. This saves you from having to make your own adjustments on third-party test benches, which are very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm (from series 6500 rpm to 6800 rpm), which is in the absolutely healthy range.This kit is of course not road legal and only suitable for race track operation. It is relatively easy to install it yourself. The tank only has to be dismantled to connect the Powercommander. The installation in our house takes approx. 1.5 hours = € 127,-.
PowerKit Bonneville T100 Stage 3
CB11466
/ RS0
€1,699.00*
PowerKit Bonneville T100 Stage 3
Consists of: Raisch Racing camshaft, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.The series camshaft of the 900er models has very tame timing, you have a high torque at quite low revs, but from 4500 rpm the torque and therefore also the power kinks strongly. With our Racing camshaft you achieve a significant increase in power + 10.5 hp and + 2.5 NM at the peak values. You have to leave some springs, below 3300 rpm you lose a bit. However, this range is not really full throttle relevant and therefore one runs over the "power loss" without noticing it (look at the stage 4 +, here the lower speed range is stronger). Above 3400 rpm you have a clear increase in performance. At 6800 rpm you even achieve a plus of 16 hp and 16.5 NM. Finally it's a pleasure to turn the 900cc engines a bit. Instead of air there is now fire, if you want to be sporty on the road, or need reserves for overtaking. But also the important, medium speed range around 4000-4500 rpm is noticeably stronger than the series, see also performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). Our mappings have been determined with a lot of time on the test bench. These mappings are immediately uploaded to the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on strange test benches which are also very expensive. In addition to the increase in performance, this also results in a more harmonious and finer engine run. We increase the speed limit by 1000 rpm (from series 6500 rpm to 7500 rpm), which is in the absolutely healthy range (the 1200 motors are basically identical in construction and rotate just as high). This kit is of course without road approval and only suitable for race track use. With this kit the camshaft has to be mounted and the valves adjusted, which takes about 3,5 hours. Installation time 5 hours.This kit is primarily intended for riders who don't want the bike to get louder, but still don't want to miss out on the power plus of the camshaft.
A note for mounting the camshaft is included.
PowerKit Bonneville T100 Stage 4 +
CB11468
/ RS0
€1,899.00*
PowerKit Bonneville T100 Stage 4 +. It consists of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.The standard camshaft of the 900 models has very tame control times, so you have a very high torque at quite low revs, but from 4500 rpm the torque and therefore also the power is strongly reduced. With our Racing Camshaft you achieve a significant increase in performance + 13 HP and + 7 NM at the peak values. The power loss below approx. 3200 rpm as with Stage 3 and 4 is not achieved with Stage 4+. You're slightly below the series, but that's not worth mentioning. Above 3100 rpm there is a significant increase in performance. At 6800 rpm you even reach a plus of almost 19 hp and a good 19 NM.(The data in the diagrams are rear wheel measurements, see general description in the product group). .Finally it is a pleasure to turn the 900 engines a bit. Instead of air fire comes now, if one would like to be sporty on the way, or reserves for overtaking needed. But also the important, medium speed range around 4000-4500 rpm is noticeably stronger than the series, see also performance diagram.This kit contains NOTHING in addition to the Stage 4 Kit. The Stage 4 + Kit for the 900 models should show what open mufflers can do in addition to the Stage 4 Kit. In this case we tested the HBS 705, which gave us very good results. But also other mufflers, like the Remus with our Racing DB Killers bring similar increases. You can find the corresponding mufflers under the category mufflers in our shop, but we are also happy to advise you. Of course, we have the appropriate mapping ready and can install it directly on the Powercommander. The open mufflers make the sound even more pithy, but depending on the muffler it remains as socially acceptable as possible.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 1000 rpm (from series 6500 rpm to 7500 rpm), which is in the absolutely healthy range (the 1200 motors are basically identical in construction and turn just as high).This kit is of course not road legal and only suitable for race track operation. additional With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4 = 7 hours.A note on mounting the camshaft is included in the scope of delivery.
PowerKit Street Twin & Street Cup Stage 2
CB11470
/ RS0
€1,039.00*
PowerKit Street Twin & Street Cup Stage 2. consisting of: X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping).Unfortunately, you don't really gain more top performance, but you gain a good 4 NM torque at the top. However, in the important speed range of 2900 - 5400 rpm you are always above the series at 3900 rpm + a good 8 NM and + 4.6 hp. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). The X-Pipe makes the sound more powerful.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. This saves you from having to make your own adjustments on third-party test benches, which are very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm (from series 6500 rpm to 6800 rpm), which is in the absolutely healthy range. This kit is of course not road legal and only suitable for race track operation.It is relatively easy to install it yourself. For installation, the tank, the manifold system and a frame girder must be dismantled.Installation costs in our house 3,5 hours.
PowerKit Thruxton 1200 Stage 1
CB11288
/ RS0
€849.00*
Powerkit Thruxton 1200 Stage 1. consisting of: Sport air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping). Power plus + 12 Nm torque and 4 HP. In the speed range of 4600 - 4700 rpm you even achieve a plus of 9 HP and 14NM. See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group). Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. This saves you having to make your own adjustments on third-party test benches, which are also very expensive. In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 300 rpm, which is within the absolutely healthy range. This kit is of course not road legal and only suitable for race track operation. It is relatively easy to install it yourself. The tank only has to be dismantled to connect the Powercommander. The installation in our house takes approx. 1.5 hours = € 127,-.
PowerKit Street Twin & Street Cup Stage 4
CB11473
/ RS0
€1,899.00*
PowerKit Street Twin & Street Cup Stage 4. consisting of: Raisch Racing camshaft, X-pipe, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new Lima cover gasket.The standard camshaft of the 900 models has very tame control times, so you have a very high torque at quite low revs, but from 4500 rpm the torque and therefore also the power is strongly reduced. With our Racing Camshaft you achieve a significant performance increase + 12 HP and + 4,5 NM at the peak values. A little feathering is necessary, below 3200 rpm you lose a little. However, this range is not really relevant at full throttle and thus the "power loss" is passed without being noticed (look at stage 4 +, here the lower speed range is stronger). Above 3200 rpm, there is a significant increase in performance throughout. At 6800 rpm you even achieve an increase of 16 hp and 16 NM.Finally it is a pleasure to turn the 900 engines a bit. Instead of air fire comes now, if one would like to be sporty on the way, or reserves for overtaking needed. But also the important, medium speed range around 4000-4500 rpm is noticeably stronger than the series, see also performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Apart from the more powerful sound through the X-Pipe, the difference between Stage 4 and Stage 3 is not very big. In some areas you are 1-2 hp above stage 3, which is not really noticeable. This is due to the series of silencers, which do not offer sufficient throughput. If you also use open mufflers, the increase is greater (torque and power), here we offer our Stage 4 + Kit.Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. Thus one saves oneself an own tuning on foreign test stands which are also very expensive.In addition to the increase in performance, the overall result is a harmonious and finer engine run. We increase the speed limit by 1000 rpm (from series 6500 rpm to 7500 rpm), which is in the absolutely healthy range (the 1200 motors are basically identical in construction and turn just as high).This kit is of course not road legal and only suitable for race track operation. additional With this kit, the camshaft must also be mounted + valves adjusted, which takes approx. 3,5 hours. Total installation time with us Stage 4 = 7 hours.A note on mounting the camshaft is included in the scope of delivery.
PowerKit Thruxton 1200 Stage 3
CB11290
/ RS0
€1,699.00*
Powerkit Thruxton 1200 Stage 3 Consists of: Raisch Racing camshaft, sports air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping) & a new stratorcover seal. Performance plus 16 Nm torque and 10 hp . See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group) . We designed our racing camshaft so that you do not lose any power at the bottom and in the middle. On top of that, however, an additional scarf is put on it and finally it is also fun to turn the Thruxton also times into the Bregrenzer. Our mappings were elaborately calculated with a lot of time on the test bench. These mappings are immediately uploaded to the Powercommander, resulting in a Plug & Play solution. Thus one spares oneself a own tuning on foreign test stands which are also very expensive. In addition to performance, the result is a harmonious and refined engine running. The speed limit is increased by 300 rpm, which is absolutely healthy. This kit is of course without street approval and is only suitable for racing. Installation time 5 hours
This kit is primarily intended for riders who do not want the bike to be louder through the X-pipe.
BMC sport air filter
CB11601.1M
/ RS0
From
€79.00*
BMC sports air filter as a replacement or exchange for the original if it is worn out. The air filter offers a much better airflow than the original paper filter, which provides more power. However, the engine can only do more with the air (and generate more power from it) if the mapping of the motorcycle is adjusted by a Power Commander. For this purpose we offer complete tuning kits which contain everything.Since these air filters are metal mesh filters, they do not need to be replaced after a certain mileage. They can easily be cleaned with a cleaner and re-oiled (see accessories in this description).
PowerKit Bonneville T120 Stage 1
CB11459
/ RS0
€849.00*
Powerkit Bonneville T120 1200 Stage 1. consisting of: Sport air filter, Raisch milled air filter cover (with larger air intake), Powercommander (with ignition adjustment + RAISCH special mapping). Power plus + 7.5 Nm torque and 7 hp. In the speed range of 4300 - 5200 rpm you even achieve a plus of 8 HP and 12.5NM. This is immediately noticeable in driving operation! See performance diagram (The data in the diagrams are rear wheel measurements, see general description in the product group).Our mappings were determined with a lot of time and effort on the test bench. These mappings are immediately loaded onto the Powercommander by us, resulting in a Plug&Play solution. This saves you from having to make your own adjustments on third-party test benches, which are very expensive. In addition to the increase in performance, the overall result is a harmonious and finer engine run.We increase the speed limit by 500 rpm (from series 6800 rpm to 7300 rpm), which is in the absolutely healthy range.This kit is of course not road legal and only suitable for race track operation. It is relatively easy to install it yourself. The tank only has to be dismantled to connect the Powercommander.The installation in our house takes approx. 1.5 hours = € 127,-.