€0.00*

MX rear fender

€419.00*

Prices incl. VAT plus shipping costs

product-image
Zubehörartikel
€119.95*
€119.95*
€49.95*
from €369.00*
item number: CBR-LC-HW-0167.SW
Product number: CB12865
Product information "MX rear fender"

Short aluminum rear fender for Triumph Scrambler 1200 models

Want a crisp, short rear end? But still want to keep the fender?
Then our short MX aluminum fender is just the part you need to give your Scrambler 1200 the right look!

The handcrafted fender turns the stock rear end into a sleek, sporty affair – nice and short, nice and pointed, reminiscent of motocross/supermoto machines.
This not only makes the rear end look more compact, but also more aggressive. Just the way a Scrambler should be.

The fender replaces the entire rear end and, of course, also functions as a splash guard.

There are two holes in the fender where you can perfectly install 3-1 taillight/turn signal combinations.
The short fender in combination with 3-1 turn signals (no more central taillight) ensures a very clean look. 
Click here for the 3 in 1

Our tip – matching accessories:

  • License plate holder: You have the choice – either on the side (nice and clean) or in the center with variable angle adjustment. Please note: The center holder is not plug & play, as a few holes (not visible) need to be drilled.
  • Cable set: For easy connection of the lights – saves time and hassle.
  • Aluminum front fender: In the same style – for a harmonious look all round.

You can find the parts right here under the accessories below the product description.

Triumph LC ab 2016
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
2
2
2
2

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Lizenz support HeckWeck R9T - Short
Lizenz support HeckWeck R9T - Short CB12407 / RS0
Classicbike-Raisch HeckWeck license plate holder - adjustable short version for all BMW R nineT models. This holder is the perfect mount for our LED Stripe rear kit. It is simply screwed under the LED bracket and then nestles perfectly in the design of the stripe rear. The especially nice thing about the new Short version is that the license plate sits directly under the LED bracket and not as with almost all other rear from the market a good deal to the rear of the nineT protrudes.The license plate size is 170 x 100mm, which covers any license plate size of any country. To realize the short license plate holder legally, we had to reach into the bag of tricks a bit. Due to the short rear end of the R9T motorcycles, it is not possible to construct a license plate holder that keeps the specified 30° angle and at the same time ensures that the license plate does not come into contact with the rear wheel when the motorcycle compresses really strongly. So we came up with an ingenious adjustment for the license plate that makes it possible to adjust the angle of the license plate.This allows the license plate to be set a little steeper in continuous operation, which of course also looks more awesome. For the TÜV visit or a traffic control is a seconds quick grip with some force on the license plate and everything is legal. See picture  2 & 3.The supplied stop nuts ensure that the license plate can not inadvertently adjust while driving. In addition, the holder can be used as a universal holder for custom conversions. The license plate holder is supplied with a LED license plate light (with E-number).

€119.95*
Side license plate holder - Vario
Side license plate holder - Vario CB12559 / RS-1
The side Classicbike-Raisch Vario license plate holder for the Triumph Scrambler 1200 models has a sophisticated mounting system, which makes it possible that the license plate holder on the one hand looks good and does not protrude too far to the outside and is legal and registrable. Through various mounting holes, it is possible to set the license plate far to the outside. This then allows a registration with your TÜV inspector of confidence.Side license plate holders do not necessarily need an ABE, to register them they must only comply with the StvO guidelines, which is given with our Vario holder, if the license plate is mounted at the outermost position. After registration, the license plate can then be placed further inwards for a nicer look. The product pictures illustrate the adjustment range of the license plate. Please clarify in advance with your TÜV inspector whether he will register the license plate holder (if necessary, we can provide a sample registration). The license plate carrier has a dimension of: Height = 100mm / Width = 155mm - The dimension is small enough to accommodate all motorcycle license plates in the world. Included in delivery: - Side license plate holder - Mounting material + cable for the license plate light - LED license plate light- Detailed step by step mounting instructions   Classicbike-Raisch Tip: If you want to mount your license plate as unobtrusively and coherently as possible, we recommend ordering a set of license plate screws (you can find them under the accessories in this description).

€119.95*
Wiring harness accessories taillight & turn signal - LC
Wiring harness accessories taillight & turn signal - LC CB11222.4 / RS600
Model: Scrambler 1200 XC / XE
This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.

Variants from €31.95*
€49.95*
New
MX front fender
MX front fender CB12867 / RS2
Short / high-mounted aluminum front fender for Triumph Scrambler 1200 models The handcrafted aluminum fender in MX design, reminiscent of short fenders on Supermoto motorcycles, gives the front of your Scrambler an aggressive / sporty look.The short and angular shape gives the fender that special extra touch. Our tip – matching accessories: Rear fender:This fender looks best in combination with the matching MX rear fender. Aluminum fork guards:We also recommend installing our aluminum fork guards for a clean front look in MX design.   You can find the parts right here under the accessories below the product description.

€369.00*
Details