LED headlight insert plug & play kit for BMW R nineT Euro 3 / 4 models with E-number / street legal.The kit contains everything needed to install the insert in the original headlight housing.Including all the necessary resistors so that the speedometer does not show an error.Detailed assembly instructions are also included.See and be seen, as the saying goes! It is very important for motorcyclists to be seen and to see well at night.With the Stripe headlight, you get a beautiful and modern look and turn night into day.This LED headlight goes well with a classic BMW R nineT. Nice and clean but not too playful or modern.Mounting accessories:For an easy connection, we recommend ordering a Japanese plug set (see accessories below the description).About the LED headlight:The headlight's very bright light ensures that you are seen better and also that you can see much better in the dark.Features:The LED headlight offers you: LED low beam & high beam / parking light.

Upgrade auf LED Scheinwerfer Birnen!  Dieses LED Umrüst Kit von Philips (bestehend aus LED Hauptscheinwerferbirne & LED Standlichtbirne), macht aus deinem einfachen H4 Scheinwerfer einen hell leuchtenden LED Scheinwerfer mit elegantem weißen Licht. Natürlich kann man hiervon nicht den gleichen Effekt erwarten wie von einem kompletten LED Scheinwerfer Einsatz. Aber du kannst deinen H4 Scheinwerfer für eine schmale Mark auf einen viel heller leuchtenden LED Scheinwerfer umrüsten und behältst dabei auch die klassische Optik (komplette LED Einsetze sind auch nicht jeder Manns Sache).Schau dir den Unterschied von den original Birnen zu den LED Birnen unter den Produktbildern an.Classicbike-Raisch Kit: Aufgrund des CanBus Systems das bei den BMW R nineT Motorrädern verbaut ist, kann man die Birnen nicht einfach gegen die originalen Austauschen, da sonst Fehlermeldungen im Tacho angezeigt werden.Um dieses Problem zu lösen, liefern wir hier ein gesamtes Kit bestehend aus:- LED Birne Hauptscheinwerfer- LED Birne Standlicht- CanBus Widerstand Hauptscheinwerfer- Widerstand Standlicht- 2x Strom Dieb- Einbauanleitung Die Birne wurde schon an einigen Motorrädern getestet und hat für diese auch eine Zulassung. Leider ist die R9T noch nicht mit auf der Liste. Es kommen aber regelmäßig von Phillips neue Modelle mit dazu. (siehe hier für die Auflistung der getesteten Motorräder: Unterhalb der Beschreibung auf Download Bike List klicken).Unsere Erfahrung hat aber gezeigt, dass man die Birnen auch so bedenkenlos verbauen kann, denn sowas kontrolliert A niemand und B sorgt es nur für mehr Sicherheit. Ggf ist es auch möglich sich die Birnen eintragen zu lassen. Bis zu 230 % helleres Licht als eine herkömmliche H4 Birne und einem tageslichtähnlichen weißen Lichtstrahl, beleuchten diese LED-Lampen alles klar, ohne dass entgegenkommende Fahrer geblendet werden.  

Koso Thunderbolt headlight plug & play kit for BMW R nineT models. The Thunderbolt LED headlight is a very minimalist and flat headlight. With the headlight you can give your machine a really nice flat and close to the motorcycle front. Photos say more than words here.The light of this headlight is simply a poem. It looks on the one hand visually very nice (especially the central strip) and on the other hand it turns night into day. The headlight is really nice and bright and ensures a safe ride even in the dark. The headlight is with E-number and thus street legal. The kit: Includes the Koso headlight and a very high quality and specially developed for the Koso lamp holder from KRT Framework. Who knows the company knows how perfect and sophisticated the part is.The holder can be installed in two positions (high and low, see photos). In addition, you can adjust the headlight in the angle (this is by the way a TÜV regulation. All holders, where the headlight is mounted rigidly in one position, are not StvO compliant). The Grid:Especially for the Koso Thunderbolt, our friend Marvin from KRT Framework has developed an absolutely perfect fitting lamp grid (which can also be seen in some of the product photos).The grille is NOT included in this kit. If you want to have the grille, you can find it under the accessories in this description. For the Euro 4 / Gen-2 models: is also supplied a resistor for the main headlight, which ensures that in the display of the speedometer no error message appears. In order not to have to cut off the original Galssockel adapter for the parking light, we recommend to order the parking light adapter from our assortment in addition (see accessory article in this description). Racer / Urbans GS: Fits both models only when the fairing is removed.

JVB Moto lamp mask with headlight insert (in 4 different versions) for mounting on the R9T Classic with USD fork. Fits both Euro3 and Euro4 models. The lamp mask is made of very high quality ABS plastic and is perfect for painting! The mask is delivered complete with all mounting materials and a suitable headlight insert.All 4 headlight versions are of course with E-number. The lamp mask makes the R9T a completely different motorcycle! A real eye-catcher, if a R9T has no protruding headlight pot. Looks great with a sporty as well as with a radical scrambler conversion. The design of the headlight mask fits perfectly into the complete JVB Moto Bodyparts line (rear, air tunnel & fenders). Of course the flat lamp mask looks especially good if a small Motogadget speedo (see accessories in this description) is installed (the speedo only works on Euro3 models). In addition the suitable speedo holder is then still needed (accessory). Note version 4 headlights:This conversion kit is vehicle specific JvB-moto conversion parts and a universal LED headlight insert. The connection of the LED headlight is complicated. It must be individually connected to the existing vehicle electronics. Additional articles for connection, e.g. Art. No. 41356 or additional switches may be necessary. Due to the low power decrease of the LED headlight, it is possible that the bus system of the vehicle declares the lighting as defective and displays it as a fault in the speedometer. Due to changes in the series on the part of the vehicle manufacturer, it is not possible to prevent such an error message from the outset by an appropriate scope of supply and offer a solution in any case.If you have any doubts with regard to the installation, please contact an authorized dealer before installation and ask for advice with regard to expected problems.

LED auxiliary lights which on the one hand make the view foggy and on the other hand also make a visual impression! Even when driving in the dark, the additional tiller provide better visibility. With E-number. Included are clamp brackets for a tube diameter of 25.4 - 30mm, 2 brackets for grade surfaces, as well as a switch (which is best mounted on the handlebar) with which you can turn the auxiliary lights on and off. For example, it attaches well to engine guards.

JW LED headlight inserts adaptive for all R9T original headlights. Can Plug & Play be replaced with the original insert? These LED headlights provide extremely bright light. This makes you feel safe even in the dark on the streets. The original H4 headlights are simply not very bright (just yesterday's technology). With this LED insert the night turns into daylight. High beam: 1600lm / low beam 1020lm Regardless of the safety aspect, such a bright LED light also makes a lot of visual sense! Who does not know about the car? A car with xenon or LED light also looks quite different than one with cheap H4 bulbs. The bend lighting is also a really great thing. When driving in the dark, the light level in curves only illuminates straight ahead, but does not illuminate the curve. But this is exactly what the adaptive headlamp does. By means of inclination sensors, the headlamp notices that the motorcycle is leaning and switches on additional LEDs on the outside of the headlamp to illuminate the bend in the road. The installation and connection is very simple, with a Plug & Play cable to an H4 connection, the insert can be simply Plug & Play installed. Attention R9T Euro 4 models: An additional CANBUS adapter is required for all Euro 4 models (see accessories in this description).

AC Schnitzer LIGHT BOMB for R nineT Urban GS Where enough light has been available to date with the series counterpart, the AC Schnitzer BI-LED headlamp LIGHT BOMB is getting really bright - from curb to curbside and much farther than usual. A real step forward in terms of safety and comfort, with its matte black look and eye-catching lighting elements. The 7 "BI-LED headlamp convinces with its economical LED position light in fiber optic technology and produces a very bright, homogeneous and white light.The AC Schnitzer LIGHT BOMB the high beam can be" switched on "to the low beam the vehicle a convincingly bright illumination. Quick and easy installation (instructions in the download area) in the standard lamp ring and a prepared wiring harness are just as natural as a lifetime of at least 30,000 hours of the LEDs used.

5 3/4" LED bump style light kit for all BMW R Nine T Euro 3 & Euro 4 models. Plug & play kit with all required mounting materials / instructions & resistors. The fancy only 5 3/4 inch headlight gives the front of the R9T a tidier and more delicate line, as the original headlight is quite large & chunky. The bump headlight has a slightly classier shape again than the Bates headlight.The Bump style LED headlight is the perfect blend of a very classic shape paired with a modern LED headlight insert. It's the perfect blend for our Modern Classic bikes. Visually, such a clear LED insert really makes a statement (just looks classy and high quality). However, the headlight radiates its full power only when it is on! On the one hand, the white LED light looks really classy, and on the other hand, it turns night into day, which really makes a difference when driving in the dark. Because everyone knows that the original H4 headlights are not exactly the best. Made entirely of metal, the headlight has an outer diameter of 165 mm and a depth of 135 mm with E-number. The headlight is supplied including the necessary mounting hardware and cable connectors to mount it. A short mounting instruction is also included.The Euro 4 models also comes with a LED parking light adapter and a high power LED resistor, which ensure that with our kit an error message is issued in the speedometer of the motorcycle. Who would like to have it in the area behind the headlight (between the fork legs) a little tidier and not look at cables / wires, we recommend our headlight plate to order (see accessories in this description).

5 3/4’ H4-Bates-Style-Lamp-Kit for all BMW R nineT models that do NOT have an LED headlight installed from the factory.The chic, only 5 3/4 inch large headlight gives the front of the R9T a tidier and more filigree line, because the original headlight is quite large and bulky. Attention: in the pictures where the headlight can be seen, the headlight is installed with an LED insert. The pictures are for illustrative purposes only, because the shape of the headlights is the same, only the light insert is different. The headlight, which is made entirely of metal, has an outer diameter of 155 mm and a depth of 110 mm with E-number. The headlight is supplied with the necessary mounting hardware and cable connectors to mount it. A brief installation note is also included.Because this headlight has a simple H4 bulb, just like the original, it can be exchanged for the original plug & play without any resistance.

Club man Completely made of metal in black. With E-number The CNC milled lamp holder is needed for the conversion to the Clubmann headlights.

These high-quality aluminum LED auxiliary headlights are the ideal addition to your Triumph Modern Classic or BMW R nineT / R12. They not only offer a visual upgrade, but also ensure greater safety when riding in the dark. Thanks to the integrated LED technology, you will be better seen at night and have significantly improved visibility. E-approved LED fog lights for road use The LED auxiliary lights have an E-number and are thus approved for road use. You can safely mount them on your motorcycle and benefit from their high luminosity without violating any applicable regulations. Easy installation thanks to complete mounting kit The mounting kit includes everything you need for installation. It is a perfect fit for Triumph Modern Classic and BMW R nineT / R12 motorcycles. Detailed instructions are also included so you can easily attach the fog lights. Mounting recommendation: attachment to SW-Motech crash bars For optimal mounting, we recommend attaching the additional lights to the SW-Motech crash bars that are specially designed for your motorcycle. You can find suitable crash bars among the accessories on this page.The auxiliary headlights can also be mounted on virtually any other accessory crash bar or in any other customized location. Two mounting options: With brackets: Use the matching brackets, which you can order from us as an accessory. This method is particularly easy and ensures a secure attachment. Directly on the bars: Alternatively, you can drill a hole in the crash bars and attach the headlights directly to them. This method requires a little more effort, but it ensures a more elegant appearance, as the headlights protrude less. Convenient operation via switch A waterproof and illuminated switch is included, allowing you to conveniently turn the headlights on and off. The green illuminated switch is easy to mount on the handlebars and gives you maximum control while riding. Optional accessories for your individual look Accessories: mudguards For an even more rugged look, you can also order protection for the LED lights. This not only enhances the visual effect, but also protects the headlights from damage. In addition, there is the option of ordering yellow foils for the headlight lenses. These give your motorcycle a classic look, but are not approved for road use in Germany. Yellow headlight film for an individual look The headlights are supplied with clear glass as standard. If you want to give your motorcycle a special touch, you can order the yellow headlight film from our accessories shop. This film is easy to apply and provides a unique design. Alternatively, you can use our film service if you don't want to do the installation yourself. Technical details of the LED fog lights Diameter: 7.1 cm – compact size for unobtrusive integration Power: 12 W per light, luminous flux: 1,050 lumens Power supply: 12 V, including wiring harness for easy connection to the motorcycle battery Protection class: IP69 – water and dust resistant for maximum durability ECE approval mark: ECE R19 F3, approved for road use Maintenance-free: Virtually wear-free LED technology for trouble-free operation and reduced power consumption Water-resistant handlebar switch: Illuminated, green switch for easy operation   Evo fog lights

Koso Thunderbolt headlight mask kit "Controlpit Tree" for BMW R nineT by MOTOISM Turn the front section of your R nineT into an eye-catcher with the headlight / lamp mask combination of KOSO Thunderbolt LED headlight & MOTOISM lamp mask. This plug & play kit is supplied with all the necessary installation materials and resistors for your BMW. Like all parts, the lamp mask is manufactured to a very high standard by our friends at MOTOISM and painted matt black. Scope of delivery: - Lamp holder: The lamp holder is screwed plug & play to the triple clamps of your R9T. The Koso headlight and the Controlpit Tree lamp mask are mounted on this.- Lamp mask: The matching lamp mask in matt black is included in the scope of delivery.- LED headlight: The Koso Thunderbolt LED headlight is included as an option (please select variant).- Resistors : Depending on the motorbike model, the necessary resistors are included in the scope of delivery, which are required so that the Thunderbolt headlight can be installed and no error message appears in the speedometer. Accessories recommendation: To avoid having to cut off the original glass base adapter for the parking light during installation, we recommend ordering the parking light adapter from our range (see accessories in this description). Optional mount for Motogadget Mini speedometer: On request, the headlight mask can be supplied with a mount for the Motogadget Mini speedometer (also visible on some product images here). If you are interested, please contact us. Classicbike-Raisch style tip: To round off the style of the mask and get a really cool front end look, we recommend ordering the Dakar front mudguard (this is also fitted in the product photos).You can find the mudguard under the accessories in this description.

Classicbike-Raisch LED headlight kit with cornering light & daytime running light suitable for all R nineT models that have a classic H4 headlight ex works. Visually and technically superior to the original headlight insert. The headlight turns night into day, you can see the road properly and others can also see you properly.   Kit / assembly:The kit contains everything you need to install the LED headlight insert in the original headlight housing and connect the electrics plug & play WITHOUT any electronic errors in the speedometer. To ensure that there are no error messages, the scope of delivery includes suitable CanBus resistors for the parking light and the main headlight (these both fit into the headlight housing). We also supply illustrated step-by-step installation instructions so that the LED headlight can be easily installed by anyone. Installation takes approx. 15-20 minutes (no soldering required, everything is plugged in).   Functionality:Who hasn't experienced the classic H4 headlights, absolutely inadequate road illumination when driving in the dark. This no longer happens with the LED insert. The light from the headlamp is extremely bright. In addition, the headlight automatically detects when the motorcycle is leaning and then also turns on the outer LEDs to illuminate the bend even better, which ensures even more safety. Optics:The headlight insert also looks great. The clear glass and clean design make the R nineT look a little more elegant and modern from the front. The black insert in particular makes the headlight look very inconspicuously elegant. Daytime running light:When the R nineT is started, only the beautiful daytime running light of the headlight is automatically illuminated. By pressing the headlight flasher (for longer than 1 second), the headlight switches to real low beam.

The classic Bates headlight housing paired with a modern LED insert.   This headlight strikes the perfect balance between classic design and modern technology. We have deliberately chosen the simplest possible LED headlight design.The LED insert has a black reflector, which makes it very inconspicuous. In addition, the small narrow LED strip shows its full effect when the daytime running light is illuminated (an additional switch allows you to switch between white and dark amber daytime running light). The headlight has ECE and DOT approval and is therefore legal to drive on all roads. The headlight has a standard H4 connector, which means it can be connected to most motorbikes via plug & play.Output:High beam: 2x 15 W Low beam: 15 W Daytime running light: 5 W