No results were found for the filter!
These CNC machined aluminum turn signal adapters allow the mounting of almost all accessory turn signals with M8 thread, on the original turn signal holder of all BMW R nineT models. The shape of the indicator holder fits the original...
A few nice small LED indicators (with E-number) including metal housing. Through the metal housing, the turn signals can be screwed directly to the original fittings and are then almost no longer noticeable. Only when you turn on the...
A pair of CNC milled fork clamps for mounting turn signals, suitable for all R9T models (except R9T Classic) The clamps can easily be attached to the fork tubes within a few minutes. At the included turn signal holder every accessory...
With these cable adapters accessory flashers can be easily connected to the original harness without cutting this broken. On most common turn signals, the opposite side of the cable fits on all Rizoma turn signals.
Universal turn signal holder for mounting the indicators at the rear of the license plate. The holder is 17.5cm wide. Holes for mounting on the license plate must be drilled so that it can be installed individually by the customer at his...
Rizoma Alu steering wheel indicator. These beautiful blinkers fit into all the bumpers and ensure a very clean look in the motorcycle front, since there is no need for normal blinkers. For rear they do NOT count as a turn signal. With a...
Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who...
From €72.00 *
Rizoma "VISION" mini turn signals made of billet aluminium in highest top quality. The LED indicators have a sequential flashing function. This means that the individual LED´s go one after the other on / build up as you know it from the...
Rizoma "LEGGERA" Mini Blinker made of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forego safety and a noble workmanship. The turn signals are very...
From €72.00 *
Rizoma "CLUB" Mini turn signals made of billet aluminium in highest top quality. This is what we modern classic fans want! Modern small turn signals in a classic round design. The turn signals shine very brightly by modern LED technology...
From €72.00 *
The new pin sets new standards for surface-mounted indicators with power LED technology. Its tiny dimensions and reduced design almost make it disappear on the vehicle. As soon as it lights up, IntensiLED® Technology makes it extremely...
LED. Small, fine and light. Completely made of aluminum in black. PAIR. With e-number
Kellermann Atto, the smallest turn signal available on the market! And that with E-number (so legal for front & back)! Perfect for anyone who just wants the turn signals to be as unobtrusive as possible on the bike. Especially in...
From €59.95 *
Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm,...
From €89.95 *
With these aluminum mounting plates, it is possible to mount all accessory turn signals on the original fastenings of the BMW R9T. At the same time, the plate covers the hole that is created when you remove the original turn signals. The...
Kellermann steering wheel indicator BL 2000 Dark, Highpower-LED, E-tested as front turn signal. Tinted, ring-shaped glass, high-quality metal housing. 12 volts. It is possible to have a load-independent relay or power resistors to adjust...
Rizoma turn signal holder for mounting the turn signals on the fork. The clamps are made of very high quality black plastic. The material is very flexible, which makes it possible to put the clamps easily over the fork without having to...
32mm turn signal arm extension for all Rizoma & Motogadget Pin turn signals. Perfect when the turn signals are too close together and do not respect the minimum distance required by law. Or you just want to have the turn signals a little...
Edele Handlebars by Motogadget. The housing is machined from aluminum CNC machined. Due to the fact that the turn signals are so flat and have a clear glass, they do not fall down at all. Fits perfectly to most handlebar grips due to its...
This is quality. The highest quality indicators we have held so far in our hands. Gorgeous drop-shaped turn signals in exactly the right size for the style not too small & not too big. The turn signal housing is completely made of...
From €79.95 *
Wunderschöne Bullet Blinker aus Metall. Klassische Form und winzig klein durch modernste LED-Technik (siehe den Vergleich zu einem 2EUR Stück). Hier gibt die passende Blinker/Rücklicht Kombination zu den Blinkern (für die, die ohne...
LED Blinker Alu Black Pair with Ruachglas. Matching turn signal to the rear wake-up kit Very nice and discreet. Suitable flasher for connection to the original wiring harness. The price is for a couple.
The CAN-BUS universal resistor can be set to several different ohm numbers (see list below). Who does not know the problem that the flashing frequency does not fit anymore when converting to LED flashers? The problem hasn't become any...
Pair of cover caps including 2 stainless steel screws for fastening. The caps cover the turn signal mount on the oil cooler of the R9T models, if you mount the turn signal in another place (for example handlebar ends or under the...