Skip to main content Skip to search Skip to main navigation

Motogadget Mo.Hub Kit BMW R9T / Tiny

Product information "Motogadget Mo.Hub Kit BMW R9T / Tiny"

Motogadget Mo.Hub KIT for BMW RnineT Euro4 models. Includes milled bracket for the Motogadget Classic & Chrono Classic speedometers, specifically for the BMW R9T.
The Mo. Hub allows to connect the Motogadget speedometers: Mini, Chrono Classic & TIny (see accessory articles in this description) almost plug & play (a smartphone with the Motogadget Mo. Ride app is mandatory).

In addition, the Mo.Hub makes it possible to use the Motogadget app Mo.Ride.

Functions Mo.Hub:

The mo.hub receives data like speed, RPM and indicator lights from the digital vehicle bus (LIN bus) and converts them into usable signals for the motoscope tiny or mst speedster. The control lights of the instrument partly represent several functions (by continuous light or flashing).
According to the clear assignment table, the vehicle plug and the instrument are connected to the contact strips of the mo.hub. Then only the vehicle plug has to be plugged into the counterpart of the BMW. The connection is ready. This is almost plug & play.
Then the smartphone and the mo.ride app are paired with the mo.hub via Bluetooth. This automatically applies all the necessary settings correctly and it can be started immediately.
Encrypted connection via Bluetooth® LE (Low Energy), therefore tamper-proof
extremely low power consumption of smartphone and mo.hub
the highly sensitive accelerometer allows to display your driving activity in mo.ride by an activity factor, number of turns, top speed and other statistics
monitoring of the current battery voltage in the app
Firmware updates possible without removal at any place via smartphone and app
Configuration possible without removal at any location via smartphone and app
Vehicle management in the app
Maintenance management through automatically updated mileage with notes on maintenance tasks, service tasks, condition of tires, brake pads, oils, operating fluids, spark plugs, etc.
Tour tracking records all journeys
Logbook stores all generated vehicle messages and maintenance tasks
display of parking position and Ping! to help with vehicle search
soon 'ride mode' will be integrated into the app. There you can compose your own dashboard from different measurements and displays. E.g. timing 0-100 km/h, temperatures, altitude meters, curve counter, tilt angle, compass, fun factor, weather data and much more.

Technical requirements:

The mo.hub is compatible with all models of the RnineT series with Euro 4 (from model year 2017). Also Urban G/S, Pure, Racer and Scrambler. It currently supports the instrument series mini with combi frame, tiny and classic.
To install the mo.hub kit, you need our app mo.ride in any case. Without smartphone and app, the mo.hub can not be put into operation!
The app works with smartphones that use the Android 8.0 operating system and iOS 12.4 or higher. In rare cases, compatibility may be limited due to the device.
More info about the app also at mo.ride.de or in Google Play and iTunes.

 

Scope of delivery:

mo.hub single BMW R9T LIN -
mo.hub with cover and mounting possibility
the vehicle connector to the BMW RnineT Euro 4
the milled and black anodized bracket for the motoscope classic or Chronoclassic especially for BMW R9T Euro 4
the detailed installation and operating instructions via the app
the mobile app mo.ride via Google Play and AppStore (free of charge)

ATTENTION: The delivery does not include a speedometer. This must be ordered separately.
See accessories article in this description.

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
BMW R nineT
R nineT /5
R nineT Classic / Roadster EU 4
R nineT Pure EU 4
R nineT Racer
R nineT Scrambler EU 4
R nineT Urban GS EU 4
-1
-1
-1
-1

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Motogadget Motoscope Tiny CB00227M / RS7
The motoscope tiny is a very small analog speedometer in 49mm format. It measures the speed digitally and displays it precisely via a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of possibilities for installation. Sophisticated technology makes the classic look possible without compromise. The dial does without any display cut-out or LCD and has a convincing classic-style look. The perfect solution for purists and minimalists. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the speedometers on many bikes (also found under the accessories).Model specific descriptions can be found below the general description. The high quality aluminum housing is turned from solid and its surface is black anodized. The screw ring is also available black anodized or mirror polished. The case is 100% waterproof and insensitive to vibrations. The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The 4 indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.

€269.00*
Motogadget mst Vintage CB00235 / RS6
Motoscope mst Vinatge. It will never be more classic. Screw ring and hands made of solid brass. The handmade, used look is slightly different on each instrument and makes it unique. "Genuine Manufacture Quality Made in Germany". Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).In addition, an additional box is needed to connect the speedometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. Technically the instrument is identical to the motoscope tiny. The dial is based on the streamline design of the forties and fifties. Matching to this, it is kept in a warmer white. The shape of the hand matches the dial and is made of brushed stainless steel, and the screw ring is also available here in a polished or black anodized finish. All other features and technical data of the instrument correspond to the motoscope tiny. The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The four indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays of the LED display. These LEDs can display all the things that the original speedometer also displays.The default indication on the display is the time. If required, a short press of the button will display the values for total kilometers, trip kilometers, on-board voltage, etc. All functions, such as resetting the trip kilometers or similar, are easy to operate via the pushbutton. Presettings or stored values remain saved even without power supply. Translated with www.DeepL.com/Translator (free version)

€319.00*
Motogadget ist Speedster CB00234M / RS5
Motoscope mst speedster The mst speedster is a small analog speedometer in an attractive retro design. Technically the instrument is identical to the motoscope tiny. The dial is based on the streamline design of the forties and fifties. Matching to this, it is kept in a warmer white. The shape of the hand matches the dial and is made of brushed stainless steel, and the screw ring is also available here polished or black anodized. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the speedometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. All other features and technical data of the instrument correspond to the motoscope tiny.The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in use and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The four indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays of the LED display. These LEDs can display all the things that the original speedometer also displays.The default indication on the display is the time. If required, a short press of the button will display the values for total kilometers, trip kilometers, on-board voltage, etc. All functions, such as resetting the trip odometer or similar, are easy to operate via the pushbutton. Presettings or stored values remain saved even without power supply.

€269.00*