The original and long intake snorkel of the BMW R nine T models belongs classically to the R9T, but by far not everyone likes it! On some machines it even looks like a foreign body and does not fit nicely to the shape of the tank.So our good friend Marvin from KRT Framework thought that it would be a much nicer solution. With the short intake kit there is finally a solution that replaces the much too long intake snorkel with a nice short one that fits more than perfectly to the tank shape of the R9T.
The inner snorkel in the kit ensures that cool ambient air and airflow is still sucked in and not warm ram air from under the tank. The snorkel is made of 2mm thick aluminum sheet metal, TIG welded and black satin powder coated.It is simply exchanged against the original part. There are no adjustments necessary, so your R nineT can be retrofitted at any time.
The corresponding air intake cover is made of carbon fiber using an infusion process, just like it is used in professional motorsports.Afterwards the cover is painted either in black silk matt or the original BMW color of the scrambler "Monolith metallic matt".Furthermore, the cover is still available in raw. This is then only filled and delivered ready to paint. Please choose the desired color in the selection.
The cover will be fixed to the snorkel as well as to the two original screwing points.
The cover integrates perfectly into the tank shape and makes the R nineT look sportier and more compact.
Included in the kit is an air inlet cover made of carbon fiber fabric, the inner snorkel is made of aluminum, as well as all the small material needed for mounting.A material certificate of the carbon fiber cover is also included in the delivery.
JVB Moto lamp mask with headlight insert (in 4 different versions) for mounting on the R9T Classic with USD fork. Fits both Euro3 and Euro4 models.
The lamp mask is made of very high quality ABS plastic and is perfect for painting! The mask is delivered complete with all mounting materials and a suitable headlight insert.All 4 headlight versions are of course with E-number.
The lamp mask makes the R9T a completely different motorcycle! A real eye-catcher, if a R9T has no protruding headlight pot. Looks great with a sporty as well as with a radical scrambler conversion. The design of the headlight mask fits perfectly into the complete JVB Moto Bodyparts line (rear, air tunnel & fenders).
Of course the flat lamp mask looks especially good if a small Motogadget speedo (see accessories in this description) is installed (the speedo only works on Euro3 models). In addition the suitable speedo holder is then still needed (accessory).
Note version 4 headlights:This conversion kit is vehicle specific JvB-moto conversion parts and a universal LED headlight insert. The connection of the LED headlight is complicated. It must be individually connected to the existing vehicle electronics. Additional articles for connection, e.g. Art. No. 41356 or additional switches may be necessary. Due to the low power decrease of the LED headlight, it is possible that the bus system of the vehicle declares the lighting as defective and displays it as a fault in the speedometer. Due to changes in the series on the part of the vehicle manufacturer, it is not possible to prevent such an error message from the outset by an appropriate scope of supply and offer a solution in any case.If you have any doubts with regard to the installation, please contact an authorized dealer before installation and ask for advice with regard to expected problems.
K&N air filter dummies pair. For the look as if open single air filters had been used, but this was 100% legal. Fits to all R9T models. Since the original K&N air filters are unfortunately not exactly cheap (alone the cost over 130€) the quite high price comes about.In the meantime we have been asked very often if it would not be possible to use beautiful K&N single air filters on the R9T for optical reasons. Of course everything BUT goes BUT: 1. it is a huge effort to build out the whole AirBox & 2. it is absolutely illegal.So we thought about making dummies out of original K&N air filters, which are then pushed over the original intake hose and fixed with the supplied clamp. Therefore we cut the filters on the back & seal the interface neatly again, so that the filters can not tear further.Optically an absolute highlight at every R9T!The assembly of the filters is very simple & self-explanatory.Right from the start we say fair to the fact that you lie very slightly against the filter when riding with your legs (but it's not disturbing, you just have to get used to it a little).
Since the original headlight on the R9T Racer is very big and makes the beautiful half-shell look clumsy, Jens from JVB has come up with something really nice.This kit contains a nice small 5 3/4 LED headlight (with daytime running light & dipped beam) as well as an unpainted GFK cover to be able to integrate the smaller headlight perfectly into the original half-shell. In addition, all installation materials are included. We recommend ordering the switch set for daytime running lights as well, so that you can switch from dipped headlights to daytime running lights (in this case only the LED ring lights up) see accessories in this description.
Notice: This conversion kit is JvB-moto vehicle specific conversion parts and a universal LED headlight insert. The connection of the LED headlight is complicated. It must be connected individually to the existing vehicle electronics. Additional items for connection such as. a resistor for the parking light may be necessary. Due to the low power decrease of the LED headlight, it is possible that the bus system of the vehicle declares the lighting as defective and displays it as a fault in the speedometer. Due to changes in the series on the part of the vehicle manufacturer, it is not possible to prevent such an error message from the outset by an appropriate scope of supply and offer a solution in any case.If you have any doubts with regard to the installation, please contact an authorized dealer before installation and ask for advice with regard to expected problems.
We give the original R9T aluminum parts the right aluminum brushed cut look. Then the parts look like the brushed aluminum tank of BMW.
The parts are only chemically deteloxiert in our house, then polished by hand & brushed (therefore, the look is not always 1zu1 the same as the machined aluminum tank of BMW) and then still clear lacquer.
Then the parts have the surface which should have an aluminum part and not the silver anodal.
The whole takes about 2 weeks.
It is possible with the aluminum hump as well as with the air tunnel.
If you want to give your R9T a really noble eye-catcher, you have just the right thing here.The full milled aluminium valve covers from Roland Sands are manufactured with highest precision.Due to the milled valve covers, the whole engine of every R9T looks much more elegant and high-quality.There are the covers with silver accent milling or as Black Edition (with which also the milling is blackened again).
The cream finish completely from the fully milled black anodised. With beautiful milling surface. Replaces the original cheap triangle made of cast iron.
Of course a proud price but a piece of an aluminum Blokc milled has its price.
The aluminum headlight sheet metal clears the front of the R9T and prevents an open view of the steering head and all cables.Fits with the original headlight as well as with the small 5 3/4 headlight from our range.Fits the R9T Scrambler & Urban GS (for the GS the lamp mask has to be removed and the lamp holder of the scrambler has to be mounted).
To get a nice clean front, there is now the aluminum headlamp sheet metal in silver (aluminum raw optimal to use it simply to install it, polish it or brush it matt), black powder coated
The sheet metal is simply put between the two fork bridges, behind the headlight (headlight does not have to be disassembled) and then fastened to the two fork legs with leather straps (included in delivery, available in black or brown) (fits nicely so that nothing rattles). An assembly instruction is naturally also included.In addition, an edge tape is included in the scope of delivery, which looks nice and classic on the one hand and protects the cables and wires on the other hand.The assembly is quite simple and fast, the original headlight does not have to be disassembled.
AC Schnitzer front spoiler suitable for all BMW R nine T models.
Cafer-Racer GRP front spoiler which gives the motorcycle a new look, like a classic CafeRacer conversion.The front spoiler gives the R9T a really sporty look! Fits particularly well to stub conversions and the R9T Racer. Especially the design of the front spoiler fits very well to the half shell of the Racer.
Mounting material is included.
The spoiler is delivered unpainted.
Including assembly instructions and parts report.
Black aluminum valve covers for our BMW R nineT Boxer engines from Unit Garage.
These covers are die-cast in a specially produced mold and then painted black to perfectly match the engine of your R nineT. The attached covers (which are available in either black or silver) are CNC-milled from aluminum.
The Unit Garage valve covers are a beautiful blend of classic / perforated covers paired with a modern, CNC machined accent.
3D milled Rizoma valve cover cover for BMW R nineT.
This in Italy in the house Rizoma manufactured valve cover, are milled in 3D driving from a large aluminum part. Also, of course, the triangles have the unique, from Rizoma known surface with fine, extra visible milling structure.
In the aftermath, the covers are anodized deep black and then milled again in spots to achieve the elegant black / silver look.
Who wants to build a really classy R nineT and attaches great importance to detail, we recommend the complete Rizoma milled parts line to install on his machine. All other parts from the line can be found under the similar products in this description.
Many are the large activated carbon filter in the R nineT Euro 4 models a thorn in the eye. To us it was also with our latest Scrambler conversion.
So we have put together a small and simple kit to remove the filter. The kit includes all materials and step by step instructions to remove the filter cartridge without further work.
SW-Motech start number plate suitable for all Sw-Motech Legend Gear SLC bag holders (matching holders see ZUbehörartikel in this description).
The plate is made of brushed aluminum and looks very high quality. On request, we can also coat this black powder for an additional charge.
The sign is very easy, just like the Legend Gear bags with the quick release system clicked into SLC holder.
Perfectly suited for all who have installed the SLC holder and do not always want to have the bag on the bike but do not want to look at the holder.
Want a different style on your R9T? This angular cover for the intake channel changes the appearance of the R9T, on the right side of the motorcycle, significantly.It fits perfectly into the design of the other JVB parts in our range, such as the front fender and the rear, which will be available soon (see accessories in this description).The cover comes unpainted (but is ready to be painted) with the grid glued in.