Schnelle Lieferung mit DHL
Service und Beratung
Lieferung in 20 Länder weltweit
Hotline +49(0)5242-906137
Filter
Close filters
No results were found for the filter!
High Mount Front Fender/Mudguard Bracket
High Mount Front Fender/Mudguard Bracket
The right look for every scrambler! On a reasonable Off Road Scrambler conversion, you simply need a raised front wheel fender as you know it from any Cross machine. The holder is made of stainless steel to guarantee a long durability...
€54.95 *
CB11615
Raisch short Alu Rear Fender Kit AC
Raisch short Alu Rear Fender Kit AC
The Alu-Rear-Fender-Kit (polished) contains everything you need to mount the fender as shown in the pictures (fender, rear light, license plate holder with turn signal holders, pre-wired cable set, holder, mounting material & a manual)....
From €325.00 *
CB11428.3
Raisch Alu Cruiser Kit
Raisch Alu Cruiser Kit
Complete conversion kit with all parts to turn your Bonneville or Scrambler into a Raisch DirtCruiser. Except for the tires everything fits to a Thruxton (can be ordered on request so without a tire or with appropriate rim modification...
€3,600.00 * €3,850.42 *
CB11425
Raisch Cruiser Kit
Raisch Cruiser Kit
Complete custom kit with all parts to turn your Bonneville or Scrambler into a Raisch DirtCruiser. Except for the tires everything fits to a Thruxton (can be ordered on request so without a tire or with appropriate rim modification for a...
From €2,300.00 * €2,436.97 *
CB11426
Stripe front fenders AC
Stripe front fenders AC
GFK mudguards suitable for the original mount fits Bonni, Scrambler & Thruxton. The fender has a very nice shape plus the elegant stiffeners in the middle and around the edge. The result is very high quality. Not as simple and smooth as...
€145.00 *
CB11216
Aluminum fenders for Bonnie SE
Aluminum fenders for Bonnie SE
Since the forked bridges of the cast wheel Bonneville are somewhat wider, the other wings do not fit all. So here is a suitable aluminum fender for all Bonnevilles with cast wheel rims.
€119.95 *
CB11196
Heck Weck Kit
Heck Weck Kit
Raisch HeckWeck-Kit for Triumph Bonneville, Thruxton & Scrambler. With this kit the bike gets a completely clean rear. Without the big original rear fender and without the original plastic rear traffic lights. The most minimalistic and...
From €259.00 *
CB00468
Fork covers Triumph AC
Fork covers Triumph AC
A pair of Gaeblrohr covers in black powder coated suitable for all air cooled Triumph models (Bonneville, Thruxton & Scrambler). The cover makes the fork look much more massive (as it looks wider), which makes the fork look much better...
€67.90 *
CB11581
Rear fender Elimination Kit
Rear fender Elimination Kit
Tailgate Eliminator Kit BONNIE, THRUX + SCRAMB .. Cool look without the large original rear fender and the rear flag headlight. Consisting of lasered aluminum sheet with the necessary holes. 1 sheet fits into the original protective...
€99.00 * €116.00 *
CB00451
Lucas or StopHeck Kit
Lucas or StopHeck Kit
Heck-Eliminator Kit with Lucas taillight for all air-cooled triumphs. For those who do not want to have a fender anymore but still want a classic taillight. A plug and play solution. Everything is what is needed. The taillight and a...
€165.95 *
CB11042
License plate holder Horst adjustable
License plate holder Horst adjustable
The license plate holder model Horst is an angle adjustable bracket for mounting on the fender. Includes license plate illumination and turn signal mount on the holder (suitable for all turn signals with M6 & M8 thread). Concentrator...
€59.95 *
CB11406
Rear round frame
Rear round frame
Rear round arch including clamping sleeves for all air-cooled Triumph Modern Classic models. The absolute classic, but also the most elaborate and beautiful of the rear conversions! Beside the optical aspect the connection of the two...
From €129.00 *
CB00486
Sideway licens plate support Swingarm AC
Sideway licens plate support Swingarm AC
Raisch side license plate holder including LED license plate illumination. Small, discreet & inconspicuous. This is what a side license plate holder must look like. Nice and close to the wheel with a round license plate so that the...
€99.95 *
CB10674
Licens holder side ways AC
Licens holder side ways AC
Lateral license plate Thruxton, Bonneville & Scrambler, attached to the strut. For all who have their license plates on the side and on the middle height of the motorcycle want to have their rear already free and clean. In the kit is the...
From €164.95 *
CB11091
Heavy Duty Alu side cover polished & matt
Heavy Duty Alu side cover polished & matt
Beautiful & very high quality aluminum side cover. The covers are made of an aluminum piece (not a weld). The covers are available either in the Edellook in polished or for the rustic motorcycles in matt polished. The price is for a couple.
€219.95 *
CB11060
Side cover with leather case Left side
Side cover with leather case Left side
GRP side cover in the form of the original painted in black for the left side (in the direction of travel) With an intrigued leather case (genuine leather). The bag looks not only good, but is also very pratic. Eg the necessary tool for...
€200.00 *
CB10920
Aluminum side cover with leather case
Aluminum side cover with leather case
Oval aluminum side cover in black powder coated. This includes a leather case (brown or black) with an integrated UK-Jack. Even without the bag, the lid looks cool. The bag can be torn or removed by means of very pratic secured...
€230.00 *
CB10959
Injection Cover Ripped
Injection Cover Ripped
Very high quality aluminium covers for the throttle flaps of the EFI models in ripped design. They are simply exchanged against the original ones. Available in black with contrast milling, polished or brass.
From €89.95 *
CB11755
Choke Knob knureld
Choke Knob knureld
Aluminium knurled choke knob (for a particularly good grip and chic look) for all carburettors & EFI models. The choke knobs are turned from one block and then knurled afterwards.
From €19.95 *
CB11757
Roswell Öl Screw
Roswell Öl Screw
Oil filler plug made of high pressure cast aluminium. The screw can easily be exchanged for the original one. Can be tightened by hand or with an Allen key. Black powder coated and then hand polished to get the nice contrast between...
From €37.95 *
CB11737.1
Roswell Öl Screw
Roswell Öl Screw
Oil filler plug made of high pressure cast aluminium. The screw can easily be exchanged for the original one. Can be tightened by hand or with an Allen key. Black powder coated and then hand polished to get the nice contrast between...
€37.95 *
CB11973
Side Cover
Side Cover
Styling side cover by motorcycle designer Jens von Brauck. Plug & Play. Pair left and right for painting
€199.00 *
CB00475
Ripped shocked Cover polished/ baclk/ silver
Ripped shocked Cover polished/ baclk/ silver
Fitting to our well-known Ripped side covers, there is now also a ribbed pinion cover. It is not only ribbed, but also clearly more beautiful than the original (as you can see in the pictures). Suitable screws are included in the...
€114.95 *
CB11268
Rizoma Sprocket Cover
Rizoma Sprocket Cover
Fits to Bonneville T100 & T120 as well as all street models. The Rizoma sprocket cover provides the pinion visually completely free, which provides for a very chic look. a heel protection for the right side is included in the delivery....
€219.00 *
CB11287
Pinioncover CNC Silver & Black
Pinioncover CNC Silver & Black
Pinion cover CNC milled. A true eyecatcher. Filigree and very noble at an amazing price. In alu natural or black anodised. New: Now with Schmadder protection plate (both black and silver) see first picture. Fits also for Seedmaster /...
€69.95 *
CB00452
Chrome chain protector
Chrome chain protector
Chromed chain protector for Bonnie + Thruxton
€109.00 *
CB00446
Clutch lever cover
Clutch lever cover
Cover for the clutch release lever. Available in black (with T-logo on top) and in chrome.
€49.90 *
CB00449
Clutch cable holder silver & black
Clutch cable holder silver & black
Clutch cable holder machined from the FULL. CNC aluminum colors: silver or black. Is really very noble. Real eyecatcher. Replaces the quite cheap original punching part.
From €49.90 *
CB00450
Choke button
Choke button
Choke button Matt chrome, or in black with UK Jack Black white CNC milled
€14.90 *
CB00484
Choke Knopf CNC
Choke Knopf CNC
CNC milled Choke Knop in black, silver or chrome. With very nice accent milling & lasered UK Jack logo.
€44.95 *
CB11185
Oil screw
Oil screw
Oil screw Mattchrome or in black. CNC milled
€21.90 *
CB00485
CNC Intermediate Pieces
CNC Intermediate Pieces
Beautifully milled ALU CNC spacers in black between carburettor and injection cover and cover PAIR. These spacers can also be used without covers.
From €69.90 *
CB10676
Conversion kit regulator
Conversion kit regulator
Conversion kit regulator / horn. Cleane Front Optics. Easy construction.
€49.90 *
CB00479
Controller Cover
Controller Cover
Controller cover. Very nice cover for the regulator with UK Jack. It is guaranteed that with this version sufficient wind comes to the regulator
€37.90 *
CB00487
Engine Plate
Engine Plate
Engine plate front in a unique design. CNC machined from aluminum
€45.90 *
CB10677
Underrun protection with T Logo SW & SI
Underrun protection with T Logo SW & SI
Oil protection suitable for all 2 cylinders (air cooled). Mt T Logo & 2 pistons for our Twins. Is of the form and quality as the original of Triumph only somewhat cheaper and with a chic logo.
€99.95 *
CB10944
Rizoma Öl Einfüllschraube Triumph
Rizoma Öl Einfüllschraube Triumph
Öl Einfüllschraube von Rizoma, für alle Triumph Modelle. Für alle die es besonders Edel mögen, ist die Schraube von Rizoma genau das richtige. Denn alle Rizoma Produkte werden aus sehr hochwertigem Aluminium hergestellt und haben eine...
€50.50 *
CB11918
Öl Einfüllschraube Crown
Öl Einfüllschraube Crown
Hochwertige, CNC gefräste Alu Schraube in tief schwarz eloxiert. Einfach gegen die originale Schraube austauschen.
€24.95 *
CB11834
Universal license plate holder
Universal license plate holder
Universal identification holder for mudguards. The license plate is universal for many mudguards. It is screwed from the inside to the fender (see photo)
From €29.95 *
CB11294
Ripped Side Cover painted
Ripped Side Cover painted
A pair of high quality ABS plastic side covers in ripped style in gloss or matt black lacquered. Due to the 3 slotted ribs the side covers look really classic and sporty. A nice little side effect is that the motorcycle also gets a...
€219.95 *
CB11102
Heavy Duty Alu Rear Fender
Heavy Duty Alu Rear Fender
Ein schön kurzer Alu-Kotflügel der Plug&Play anzubauen ist. Passt an alle Bonneville, Scrambler und Thruxton Modelle. Der Kotflügel ist aus sehr hochwertigem massiven Alu (wahlweise in poliert oder matt gebürstet). Er ist etwas breiter...
€174.95 *
CB11063
Heavy Duty Bobber Aluminum Mudguard
Heavy Duty Bobber Aluminum Mudguard
Alu Bobber fender in heavy duty short style For all models with spoked wheels. What does that mean ? This mudguard is made of solid solid (made of 3mm thick aluminum). These mudguards feel really high quality and at the price. The...
€134.95 *
CB11041
Heavy Duty Alu Mudguard
Heavy Duty Alu Mudguard
Aluminum mudguards in the Heavy Duty Style For all models with spoked wheels. What does that mean ? This mudguard is made of solid solid (made of 3mm thick aluminum). These mudguards feel really high quality and at the price. The...
€134.95 *
CB11040
CNC oil filler cap
CNC oil filler cap
CNC milled aluminum oil filler cap with laser-engraved logo and vertical knurling for easy removal.
€25.00 *
CB10814
JvB Seat Fender Combination
JvB Seat Fender Combination
Seat-fender combination. Rear frame does not have to be shortened. Includes taillight. Matching license plate holders and license plate holder can be found in the accessories of this description.
€757.00 *
CB10706
Aluminum side cover black & silver
Aluminum side cover black & silver
Polished or black anodised aluminium side cover. THRUXTON + BONNIE. Sporty look in the style of number plates from racing. Slimmer than the original lids and we think they fit perfectly with the Thruxton. Easy to paint if a different...
From €89.95 *
CB00440
Front fender Bobber
Front fender Bobber
Styling front fender by motorcycle designer Jens von Brauck. Beautifully scarce and in a perfect quality. This GRP part is not laminated but pressed. This results in a nice smooth surface. Plug & Play. Ready for painting.
€149.00 *
CB00474
JVB Headlight Kit
JVB Headlight Kit
Styling lamp mask including headlight from JVB. Absolutely new and distinctive look. Ready for painting. The mask changes the look of the machine considerably. Because of the no longer protruding headlight the bike looks more modern...
€310.00 *
CB00476
Chrome valve cover
Chrome valve cover
Chrome valve cover all models
€219.00 *
CB00447
Aluminum rear fenders
Aluminum rear fenders
Aluminum rear fender. BONNIE + THRUXTON & Scrambler. Polished. Easy to paint when a different color is desired.
€194.95 *
CB00438
Aluminum fenders
Aluminum fenders
Aluminum front fender for 17 inch wheel tags. Handmade and polished. With a really very shapely holder. Easy to paint when a different color is desired. Must be adapted ! Also suitable for Triumph with 17 cast wheel, please select model.
€190.00 *
CB00453
Aluminum front fender
Aluminum front fender
Aluminum Front fender BONNIE + THRUXTON & Scrambler. Polished with perforated holes. Slimmer, more delicate, more elegant than the originals. Easy to paint when a different color is desired. Also with holes for direct screwing at the...
€154.70 *
CB00437
Seat mudguard combination
Seat mudguard combination
Seat-fender combination. Rear frame must be shortened. No Plug & Play solution! Includes taillight.
€757.00 *
CB00477
Smart Heck
Smart Heck
SMART rear fender with built-in LED taillight. Fits to Bonnie, Scrambler and Thruxton. No changes to frame required. Must be painted. Original seatbills continue to fit. A license plate holder is included in the delivery. There is a...
€219.00 *
CB00480
Fender Extension
Fender Extension
Fender extension Thruxton & Scrambler. Protects against moisture and dirt
€29.90 *
CB00482
Eingine Cover Ripped
Eingine Cover Ripped
Ribbed alternator cover suitable for all air cooled Twins in 50s design. Made of die-cast aluminium in black, silver matt available. The sealing surfaces are naturally milled (a seal must be ordered separately). The dimensions are...
From €295.00 *
CB11404
Valve cover ribbed
Valve cover ribbed
Valve cover suitable for all air-cooled twins in ribbed 50s design. Made of die-cast aluminum in black & silver raw. The sealing surfaces are of course milled (seals must be ordered separately). The dimensions are identical to the...
From €385.00 *
CB11405
Clutch cover ribbed
Clutch cover ribbed
Clutch cover suitable for all air-cooled twins in ribbed 50s design. Made of die-cast aluminum in black & silver raw. The sealing surfaces are of course milled (seals must be ordered separately). The dimensions are identical to the...
From €745.00 *
CB11403
Viewed