€0.00*

7 Lamp kit H4

Skip image gallery

€84.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
from €739.00*
from €90.00*
€89.95*
from €39.95*
item number: 211257233B
Shop-number: CB10671

Product information "7 Lamp kit H4"

7 "Lamp kit H4. Size as original. Completely made of metal with E-number. Lower mounting, this brings the headlight quite a bit closer to the vehicle. The difference is almost 50mm, which gives a completely different look. We deliver this headlight including stainless steel bracket for mounting on the lower triple clamp.

If you want to have the headlight a little more modern and better light, you can also order a J.W. Speaker LED headlight insert. These fit Pkug&Play in the housing (see accessory article in this description).

To be able to mount the headlight, the controller must be relocated on the motorcycle. You will find a suitable kit for this under the accessory articles in this description. The same applies to the ignition lock.

Info: On the pictures on the motorcycle was additionally attached a yellow film. This is NOT included in the delivery.

Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Thruxton 900 EFI
  • Thruxton Vergaser
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Thruxton 900 EFI
Thruxton Vergaser
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

J.W Speaker LED Headlight AC
J.W Speaker LED Headlight AC CB11572M / RS1
J.W LED headlight inserts with adaptive bend lighting for the original Thruxton & Bonneville headlight with 7" headlight. Can be exchanged Plug&Play against the original insert.These LED headlights provide extremely bright light. So you feel safe on the streets even in the dark. The original H4 headlights are simply not very bright (is just technology from yesterday).With this LED insert, even the night becomes day.The adaptive bend lighting ensures that the inside of a bend is illuminated in the dark. By integrated inclination sensors in the headlamp, the headlamp recognizes that the motorcycle goes into inclined position and automatically turns on the outer LED's on the headlamp, which then illuminates the curve perfectly.High beam: 1600 lm / low beam 1020 lm Regardless of the safety aspect, such a bright LED light is also visually impressive! Who does not know it from the car? A car with xenon or LED light looks completely different than one with cheap H4 bulbs.The inserts are optionally available as adaptive version (with curve light), which again provides more safety at night. This is because here, the steering still uses external LEDs, which illuminate the bend better than the non-adaptive version. Installation and connection is very simple: A plug&play cable to an H4 connection makes it easy to install the insert Plug&Play.In addition, an adapter ring is required for installation in the original headlamp (see accessories article in this description).

€739.00*
Details
Pantera Forkcover Springs
Pantera Forkcover Springs CB12139M / RS0
A pair of fork springs that work like our well-known fork covers. These are inserted between the upper and lower triple clamp. So you get the look of a classic Springer fork. That is times oldschool! For assembly, the upper triple clamp must be taken down and then the springs are simply pushed over the fork tube. Mandatory is that you have a headlight mounted, which is attached centrally and not with lamepnhaltern, which sit as original on the fork. (Suitable headlights see accessories article in this description). Note Thruxton: Who wants to mount the springs on a Thruxton, it must shorten a small piece. Dimensions: 20x6x6 cm

€90.00*
Details
Conversion kit regulator
Conversion kit regulator CB00479 / RS29
This kit moves the regulator from in front of the triple clamp (where it is totally in the field of vision, and a regulator is not a very nice thing) behind the triple clamp to the place where the horn is originally located. The horn is then moved to the left under the tank. The assembly is simple (instructions and all assembly materials are included). This is absolutely safe for the regulator in terms of wind and cooling.

€89.95*
Ignition lock relocation kit
Ignition lock relocation kit CB00182 / RS201
Ignition switch relocation for your air-cooled Triumph Modern Classic bike. Are you annoyed by the position of your original ignition switch? Or you just don't like the look of it? Then this kit is just right for you. With the relocation, the ignition lock is inconspicuously relocated a little under the tank.The holder is also significantly smaller and of better quality than the original one. Optionally for the left or right side

€39.95*
Details