Screwlock

Chain set complete for all models 900cc engines with 520 chain. Standard gear ratio of the motorcycles see table below. ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU program (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models) Enuma 525 chain kit The kit includes a very high quality Enuma chain, a chainring (choice of a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A bit further down in the description, you have to pack your wish gears to the set.In addition, a rivet lock is included. Tip:- We recommend for safety still a new pinion lock plate with the chain set to order (see accessories article in this description).- In addition, you will find in the accessories still beautiful, black chainring nuts for all who want to have it completely black.- For easier assembly we recommend the Enuma screw lock to order with it Serial translation model chainring pinion Bonneville T100 41 teeth 17 teeth Street Twin 41 teeth 17 teeth StreetScrambler 41 teeth 17 teeth StreetCup 41 teeth 17 teeth Since the standard transmission is clearly too short, we recommend taking the larger 44 chainring and thus translate the bike slightly shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed.   To the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. This chain offers by the Quadra-X rings a significantly improved life compared to the O-ring chains used by the motorcycle manufacturer and to the X-ring chains of other accessory manufacturers. They prevent in the best possible way the penetration of dirt and moisture and provide additional grease chambers.Attention. A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.

Chain set complete for all models 1200cc engines with 525 chain. Series ratio of the motorcycles see table below.Attention not all gear ratios are possible or make sense. See model specific descriptions below. ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU program (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models) Enuma 525 chain kit The kit includes a very high quality Enuma chain, a chainring (choice of a black steel chainring or a stealth chainring in gold / black) and a sprocket.A bit further down in the description, you have to pack your wish gears to the set.In addition, a rivet lock is included. Tip:- We recommend for safety still a new pinion lock plate with the chain set to order (see accessories article in this description).- In addition, you will find in the accessories still beautiful, black chainring nuts for all who want to have it completely black.- For easier assembly we recommend the Enuma screw lock to order with it   Serial translation model chainring pinion Bonneville T120 37 teeth 17 teeth Thruxton 1200 42 teeth 16 teeth Thruxton 1200 R 42 teeth 16 teeth Speed Twin 42 teeth 16 teeth Bobber 37 teeth 17 teeth Bobber Black 16" 37 teeth 17 teeth Speedmaster 1200 37 teeth 17 teeth   Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, we therefore recommend to take larger 40er or 42er chainring to translate the motorcycle so something shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed and the konztant jerking at low speeds is somewhat smoother.A larger chainring than the 42 teeth is not provided in this kit for the Bobber. Who would still like to have this, which can contact us, then we put together an individual kit.Attention: If you have installed a side number plate carrier (e.g. the Wunderkind from our range), you need a longer chain. If you choose a 42 chainring, you also need a longer chain.An even longer chain is needed when using a side number plate holder in combination with a 42 tooth chainring.(therefore please select the appropriate model in the model selection). Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, we therefore recommend to take larger 40 or 42 chainring to translate the bike with it a little shorter. This pushes the bike down again significantly more powerful, but still does not lose top speed and the konztant jerking at low speeds is somewhat smoother.A larger chainring than the 42 teeth is not provided in this kit for the Bobber. Who would still like to have this, which can gladly contact us, then we put together an individual kit for him.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain to the chain kit, you have to choose the right model in the selection above. How you can check/determine which swingarm your Bonneville has, you can see in the product photos. Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models from the factory have a fairly appropriate gear ratio. But if you want it even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go to a 40 tooth chainring and / or a 17 tooth RItzel. Scrabmler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable ratio from the factory. Who wants to have it but even shorter, for nch more punch in the field, we recommend the 46 teeth chainring. For a slightly longer ratio, we would go to a 42 teeth chainring and / or a 17 teeth RItzel.    To the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. This chain offers through the Quadra-X rings a significantly improved service life compared to the O-ring chains used by the motorcycle manufacturer and to the X-ring chains of other accessory manufacturers. They prevent in the best possible way the penetration of dirt and moisture and provide additional grease chambers.Attention. A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.

Attention! When ordering in the comments please specify for what a motorcycle and what year of manufacture the set should be. Only for models up to 2014 from 2015 other chains were installed (for this please contact us personally) Enuma 525 chain kit The kit includes a very high quality Enuma chain, a chainring (choice of a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A bit further down in the description, you have to pack your wish gears to the set.In addition, a rivet lock is included. Who has no rivet tool, we recommend the patented Enuma screw lock to order with it (you will find in the accessories articles in this description). We recommend you to choose a shorter gear ratio than the original one from Triumph (this is simply much too long for the engine power). We advise a 18 / 45 or even 17 / 45 ratio.If you want to order a different gear ratio than available, feel free to contact us and order a custom chain set. Factory gear ratio:790cc engines: 17 / 43865cc engines: 18 / 43 Tip:- We recommend to order a new sprocket locking plate with the chain set for safety (see accessories article in this description).- In addition, you will find in the accessories still beautiful, black chainring nuts for all who want to have it completely black.- For easier assembly, we recommend the Enuma screw lock to order with it   To the Enuma chain: There is cheaper but nothing better. Quad-Ring chain technology. Superior to the original DID O-ring chain.By the optional patented screw lock problem-free fast change without swinging dismantling and/or Spengen and riveting. This saves time and money. Simply old chain durchflexen, Enuma with screw lock on it and ready. These chains are so strong that retensioning is almost unnecessary. Chainring and sprocket made of the best carbon steel.