Triumph Milled Bremsbehälter Abdeckung by Classicbike-Raisch. CNC gefräste Aluminium Ausgleichsbehälter Abdeckungen für alle Triumph Modern Classic Modelle mit 1 Zoll Lenker.
Die Deckel werden im 3D Fräsverfahren in Deutschland hergestellt. Im Nachgang werden sie Glasperlen gestrahlt und schwarz eloxiert. Dadurch bekommt man eine unglaublich wertige, raue Oberfläche, die auch perfekt zu den original Armaturen der Triumph Modelle passt.Außerdem hat das den Vorteil, dass die Oberfläche einen noch tieferen Schwarzton bekommt und diesen auch noch nach vielen Jahren hat.
Das angedeutete T Logo mit integrierter Union Jack Flagge lässt dich beim Fahren daran erinnern, dass du eine Triumph, ein Englischer Klassiker mit Tradition fährst.
Die Ausgleichsbehälter Abdeckungen werden ganz einfach gegen die originalen ausgetauscht, was in wenigen Minuten erledigt ist.
Optional könnt ihr euch noch schwarze Schrauben dazu bestellen, diese findet ihr unter den Zubehörartikeln in dieser Produktbeschreibung.
Rizoma NEXT Brake Fluid Reservoir WITH ABE. Made of high quality billet aluminum with a perfectly integrated glass insert.
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma NEXT Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma Notch Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
ABM Wunderkind Brake & clutch lever for all triumphs for the best grip. The handle area was much more powerful than any other lever on the market. This results in a very good feeling as it was not known before. We really do not promise too much, because that just feels great. The levers are deep black anodised. The 6-position adjuster is optionally available silver or black, and can be adjusted with one hand even during the journey. With ABE. Another tip from us: Brake and clutch levers are among the popular crashing parts. Therefore it makes sense to always have a pair of spare levers on the tour in the luggage. So just swap in the original in the tankbag.
LSL brake + clutch lever. A high end product, how you can not do it better. CNC machined from 6061-T6 billet aluminum. 5-position adjustable lever. This is suitable for delicate ladies hands and for giant patients. The stainless steel adjustable adjusters and the cadmium coated springs in the mechanism guarantee an absolute precision and suppleness. A real difference from the original part. Who holds these handles in hand is pleased that there is still in our fast-moving plastic age still such fine merchandise. Fits all models with adjustable levers. Available in anodized colors: black-silver-gold-red and blue. Levers and adjusters can also be supplied in different colors. For the colors blue, red & gold please contact us by phone or e-mail
Bracket for mounting brake fluid reservoirs on the handlebar fitting. On many motorcycles the brake fluid reservoir is held in the handlebar fitting via the mirror thread. As soon as you change the mirrors (e.g. on handlebar end mirrors) this looks anything but nice. With this holder you can remove the mirror thread and you get a nice clean solution.It is also possible to mount underbar mirrors on bikes with an external brake fluid reservoir attached to the mirror thread.
The holder is available for accessory tanks (e.g. Rizoma or LSL) and for Triumph original and Triumph accessory tanks.
The patented Rizoma Proguard system is a very practical part of every motorcycle. In case of a fall (or if the motorcycle simply tips over or hits a wall) the Proguards protect the brake and/or clutch levers as well as the rider's fingers.
The minimalist design of the protectors ensures that they do not attract any negative attention on the motorcycle.
The protectors are manufactured in a very high quality known from Rizoma.
Additional adapters are required to mount the system (mounting on all Triumph motorcycles is only possible with an accessory handlebar).For mounting on all accessory handlebars we offer the adapter "Rizoma handlebar-mirror adapter uni. LP200B is required.For mounting on the original handlebars of a BMW R9T the adapter "BMW R9T Adapter Weights + Mirror" LP321B is requiredFor adapters see accessories in this description.
The price is for one protector
Beautiful CNC milled cover for brake fluid reservoir. The finest surface and appearance due to the two-colour design. This cover is first coated black and then clamped again in the milling machine and milled again, so that you get the two colors (black/silver) optics.We recommend to order the stainless steel screws to tighten the lid (see accessories in this description).
CNC milled aluminium cover for the brake fluid reservoir.
Completely in black the UK Jack lines are only discreetly noticeable. Optically it looks very noble!
We recommend to order our black brake fluid cover screws (see accessories in this description).
Black die-cast aluminium brake fluid cap. The cover, looks by its curved form upwards, very high-quality and harmonious on the motorcycle!
Completely in black, the UK Jack lines are only discreetly noticeable. Optically it looks very noble!
We recommend to order our black brake fluid cover screws (see accessories in this description).
Black die-cast aluminium brake fluid cap. The cover, looks by its curved form upwards, very high-quality and harmonious on the motorcycle!
Completely in black, the ribs are very discreet. Optically it looks very noble!
We recommend to order our black brake fluid cover screws (see accessories in this description).
Is also available as UK-Jack version (see similar articles).
Black brass brake fluid cap. The lid, looks through its curved shape upwards, very high quality and coherent on the bike, because it is not like most lids just flat.
In the brass version, for all those who love to have a few golden details on their machine.
Optionally in ribbed version or UK Jack.
Complete clutch fitting with clutch lever (adjustable). (1 inch)
For all the an old Bonnie drive and still have no adjustable levers but gladly which would have.
This is also the beautiful milled lever which we offer mountable.
Stainless steel screws 2 heads for mounting the brake cover BONNIE. Replaces the rust-proof original cross-head screws, which are quickly gilded, and look cheap.