Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much.
15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation.
The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look!
Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much.
15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation.
The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look!
Classicbike-Raisch recommendation: Who would like to have the tape as long as possible black, we recommend a can of exhaust paint (see accessory article in this description) to order. With this you can spray the finished wrapped manifold then. This will keep the tape black much longer.
Exhaust tape Thermo Tec for the ultimate look. Qualitatively the only true, because there are some cheap products on the market that can burn when gasoline comes to it. In addition to the anti-chrome look, there is the pleasant side effect that simply more exhaust heat is directed to where it belongs: namely to the rear of the muffler. As a result, the engine is no longer so heated up by the radiated heat. In copper colors for a more eye-catching look. 15 meters long in 5 cm width. That's enough for two manifold. Two non-rusting clamps for mounting are included. The manifold does not need to be removed for installation.
The exhaust tape will naturally fade a bit over time (due to heat, wetness, etc). This gives you a really cool used look over time.
Raisch racing DB Killer for Zard short exhaust systems. More sound + more performance through more throughput. Approx. 40% larger hole. With our DB Killer there are now 3 sound variants available for the Zard systems. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.To be honest, with the original DB-killers you only get a very small sound compared to the standard version. Since most of them do not want to drive without DB-killers, we have made this more open variant. It looks like you have a legal DB-killer in it, but it sounds really good! With these db-killers the Zard systems get the sound they need.
A can of high quality and heat resistant exhaust paint in matte black.
Suitable for painting exhaust systems. Very interesting for all those who a high-quality ceramic coating too expensive. Of course, you can not compare such a paint with a ceramic coating, but you get a nice result for little money, if you have some painting skill.
In addition, the varnish is suitable for spraying black heat protection bands, if they are to remain black longer.
Raisch racing DB Killer SINGLE all Shark exhaust systems. More sound + more power through more throughput. With our DB Killer there are now 3 sound variants available for the exhaust systems. With original DB Killer, with Raisch DB Killer or completely without. Our DB Killers are without ABE. The DB Killers are delivered separately.With the original DB Killers you only get a very small sound compared to the standard killer. Since most of them don't want to drive without a DB-Killer, we have made this more open version. It looks like you have a legal DB-Killer in it, but it sounds really good! The killers almost have the sound of driving without but there's something in the exhaust.The DB killers are sold separately. 2 pieces are needed for a 2-2 exhaust system.
Raisch DB-Killer for Remus exhaust systems. More sound + more power through more throughput. Approx. 40% bigger hole. With our DB-Killer there are now three sound variants available for the Remus system. With original DB-Killer, with Raisch DB-Killer or completely without. Our DB-Killers are without ABE. They are delivered as a pairPlease choose in the selection whether you have a water or an air-cooled Triumph, as these have different DB killers.
Since the original sea rings can break over the years, we also offer them as spare parts (see accessories in this description).
Raisch DB Killer for Remus. More sound + more performance through more throughput. Approx. 40% larger hole and shorter tube. With our DB Killer there are now 3 sound variants available for the Remus system. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.With the Racing DB Killers the exhaust makes a really good sound! With the original DB-killers the difference to the original exhaust is not really big, but you don't want to drive without it either. Therefore our perfect solution of the Racing DB-killers.The killers are available in silver & black (as you look at them very much, we recommend to use the black ones if a black exhaust is used).
The SW-MOTECH motorcycle arch protection is designed as a supplement to the engine protection and secures the front manifold pipes against rockfall. At the same time, the robust stainless steel cover serves as heat protection. The universally applicable protector is available in two versions for tube diameters of 32-50 as well as 50-70 mm. By dividing into flexible segments, the covers can be easily adapted to the manifold shape. Depending on the number of pipes and the pipe diameter, the user can assemble the appropriate sheathing for almost every motorcycle model.
particularities
Protection against rockfall for the elbow pipes
Heat protection for drivers and passers-by
Universal fit for tube diameters of 32-50 mm
Flexible segments allow simple adaptation to different pipe variants
Ventilation openings for reliable ventilation
Length: 30 cm
Material: Stainless steel with brushed finish
delivery
Motorcycle anti-bend protection for pipe diameters of 32-50 mm
Mounting material
Installation instructions
Note: The mounting kit is also available in a version for tube diameters of 50-70 mm
Price is for one page.
Finally, there are some! Stars rings for the elbow in retro style. In order to lend the Moppet the right classic old school look, there are now finally manifold rings as before. Sold as a pair. The rings are easy to separate in the middle and can then be attached (ie the elbows do not have to be dismantled for assembly). Do not fit for scrambler.
D.B. for Norman Hyde Bottle exhaust systems (HBS.105 - 205 - 605 - 705).
These DB Killer put the sound pressure in contrast to the originals strongly down, so that no neighbor is disturbed in the morning. A much deeper, nicer sound than the series system remains in any case. Is in a few seconds in and removed again. At the NH exhausts is a 4 hole in the factory (this must be drilled for our DB killer to 5mm to ensure a secure hold of the killer). Our special, for the Norman Hyde systems developed DB-killers have a screw welded at the end, who is the sound with the killers too leiste, which can still make this screw out for more sound.
Exhaust gasket for sealing between elbow and cylinder head outlet. Whoever had the bend from the bend needs this seal which is squashed when it is put on and therefore can only be used once. Couple wise.
Muffler hole cover Scrambler. Who builds an accessory exhaust such as Zard or Shark 2-1 down to its scrambler remains an ugly hole at the original exhaust holder. For this we have milled a beautiful milled part made of aluminum. Comes complete with stainless steel screw, nut and washer. FIT OPTIC ALSO VERY GOOD TO THE ORIGINAL SCRAMBLER EXHAUST
Probably the best and most effective cleaner for stainless steel surfaces (e.g. exhaust manifolds & rear silencers).
This cleaner really works wonders! We tested it ourselves in our workshop and could hardly believe how well and quickly the cleaner works (ideal for making manifolds and exhausts look like new again).After a few years, every beautiful stainless steel manifold that was once matt silver or polished no longer looks silver, but yellow.Simply spray such a manifold with the cleaner, wait 2-3 minutes and rinse with water. As if by magic, the manifold will look almost like new again, without grinding / rubbing or similar.
Tip:For safety reasons, we recommend covering other parts of the motorcycle or removing the part to be cleaned.
€17.95*
This website uses cookies to ensure the best experience possible. More information...
Shop Relaunch
Hallo lieber Biker,
wir haben vor kurzem auf ein neues Shopsystem umgestellt.
Aller Anfang ist schwer und bringt manchmal kleine Probleme mit sich.
Sollte beim Bestellvorgang etwas nicht funktionieren, lass es uns bitte wissen, wir helfen dir gerne weiter!
Classicbike-Raisch Team
Dear biker,
We recently migrated to a new shop system.
Every beginning is difficult and sometimes brings minor problems with it.
If something doesn't work during the order process, please let us know and we'll be happy to help!