Please choose your bike

Tail Light Bates Style CB00089M / RS600

Bates Style taillight LED black. Super class metal metal. With e-number. Here to the ready wired cable set

€36.95*

4 inch geadlight CB00092 / RS600

4 inch - 131mm exterior headlight black. Completely made of metal with E-number. Lower attachment. We supply this headlamp including stainless steel bracket for mounting on the rectifier. Is sometimes a different look and makes the whole front visually very slim. The cables from the original lamp must be placed under the tank. The fat original speedometer no longer fits and would not fit to this lamp. Alternativeb offers the Tachos of Motogadget on our side.

€64.95*

Lucas Light taillight combination / AC CB00095M / RS600

Lucas Light tail light combination complete kit. The Lucas Light Kit is a nice classic turn signal tail light combination, which is screwed onto the original fender (but new holes must be drilled!). The original holes are then covered by the license plate). Tail light as well as turn signals are with E-number. Included in the kit is: Lucas taillight Drops aluminum turn signal Turn signal holder Cable set for turn signal & tail light Optionally, the kit is available in black (turn signal & taillight black) and silver (taillight & turn signal silver)

€189.95*

Details

7 Lamp with diffusing glass CB00101 / RS600

7 inch metal headlight with H4 bulb.Glossy black coated headlight housing with chrome lamp ring for a little accent.Noble and very high quality finish. With classic diffuser glass. But the original insert also fits in the headlight, who likes that better. The headlight is also very suitable for integrating a small Motogadget in the headlight (hole must be drilled yourself). See photo.

€129.95*

Nightbreaker Laser Licht +130% CB00104 / RS600

OSRAM Nightbreaker Limited NEW! Even tested is really top. In the picture, we have installed a double headlight in a bright Osram. The other is a standard H4 lamp. The difference is more than clear. Probably the strongest permissible halogen light in the world - now with new technology for longer life The ideal lamp for motorcyclists who want to drive with more light safer. Thanks to their specially developed high-performance helix and the blue ring coating, the NIGHT BREAKER PLUS spotlights - up to 110% more light on the road - deliver up to 35m longer light cones * - up to 15% whiter light * * compared to standard lamps

€19.95*

Vintage Headlight Black CB00105 / RS600

Vintage lamp. 5 3/4 inch black with chrome ring. Comes with stand light bulb but without H4 bulb. The headlight has a cutout on the case for our DAYTONA VELONA tachos. If no tachometer is used, the supplied cap can be inserted into the hole.

€199.96*

Old School Tail Light CB00107 / RS600

Old School taillight. LED black metal housing, red glass - with number plate illumination and E number

€69.95*

5 3/4 inch headlight CB00108M / RS600

Headlight 5 3/4 with LED light ring, metal housing chromium-plated, H4, 12V 60/55 W, side mounting, E-tested. Lamp holder 143T024 is necessary. Ignition lock must be installed.

€119.95*

Details

Flasher holder regulator CB00110 / RS600

Indicator front all models for front of the regulator. Black coated. The original regulator can be screwed further in front of the holder.

€21.90*

Lamp holder Raisch CB00111 / RS600

Colour: Silver | Design: Version 1

Raisch lamp holder with T logo. PAIR! With this beautiful, rustic holder, the original lamp is set a little lower, resulting in a nicer overall line. It also brings the headlight a little closer to the motorbike. The holder is slid over the standpipe of the fork (as some models originally have). This gives the fork a nice thick look and there is less chrome to be seen. The holders are made entirely of stainless steel in Germany and are then coated in black powder. If you don't have handlebar end turn signals, you also need our indicator routing for the regulator. The ignition lock must also be relocated (see accessory article in this description). In the table you can see the offset of your original headlight due to the brackets. Model change: Height change / distance lamp to motorbike Bonnevile: as original / 2.5 cm closerBonneville Spirit + T214: 3.5 cm lower / 1 cm closerScrambler: 3,5cm lower / 1 cm closerThruxton: 1 cm higher / 2.5 cm closer

€99.95*

LED Turn signals Old Style CB00113 / RS600

LED Blinker OS Style Pair. Alu housing black. 20mm housing. Stitch length 20mm. Decent unexpected look. Not too small and not too big. Just matching our classic twins. Super bright !!

€49.95*

Flashing relay CB00471M / RS600

Flasher relay digital with stopper. Really controls all turn signals. Whether standard, halogen or LED. Always the correct flashing frequency. In addition, an integrated automatic shutdown of the turn signals is adjustable. Everyone knows this: Suddenly comes the hand sign from the buddy: BLINKER AUSMACHEN (shit again forgotten, how embarrassing).We deliver immediately with the matching connector for the Triumph slot. Just swap and you're done. Made in Germany! Please check if your flasher relay has a 2 POL(electronic speedo) or 3 POL(mechanical speedo) connector. Sits under the left side cover (Select whether for models with mechanical or electronic speedometer). For models with original 3 pole flasher relay, unfortunately in most cases a pair of resistors (see under accessories) is still necessary. Speedmaster and America models with electronic speedo have mostly original 3 pole flasher relays. Please check before ordering (under the tank, on the right side of the frame tube).

€49.90*

Details

JVB Headlight Kit CB00476 / RS600

Styling lamp mask including headlight from JVB. Absolutely new and distinctive look. Ready for painting.The mask changes the look of the machine considerably. Because of the no longer protruding headlight the bike looks more modern (pictures say more than words). Not a Plag&Play solution. A little rebuilding is required. Horn and regulator have to be moved. Don't worry, this can be done without too much effort.

€349.00*

Lucas Light CB00068M / RS600

Lucas style metal tail light.The metal housing is available in silver or black.Much nicer than the original giant plastic tail light.For easy connection we recommend to order a cable set. See accessories article in this description. We also offer a practical indicator holder that is ideal for attaching to the tail light (see accessories article).Or you can order the tail light as a complete kit (see accessories article in this description).Attention, this tail light cannot be mounted plug & play on the holes of the original mudguard. 3 new holes have to be drilled. The original holes are then covered by the rear light and the number plate (if it is attached to the rear light).

€99.90*

Details

Blinking of seat bench CB00084 / RS600

Rear seatbelt kit. Easy installation on original threads under the seat. pair

€19.90*

LED taillight CB00070M / RS600

LED taillight. Clear optics. Suitable for rear mountings, where the fender has been removed and a lamp holder can be manufactured. The threads of the seat attachment can be used for this purpose. Fits to Heck-Eli Kit.

€26.95*

Details

H4 headlight plug CB12850 / RS600

This plug can be connected to all accessory headlights that do not have a plug. This means that they can then be connected to the motorcycle plug & play. All accessory headlights (not LED) in our range do not have a plug.

€3.99*

Blinker Gewinde Kappen CB12809 / RS601

Universelle Kunststoff Abdeckung für M8 Blinker Gewinde & Mutter. Diese Kunststoffkappen werden über das Gewinde und die Mutter von Zubehör Blinkern mit M8 Gewinde gestülpt. Dadurch kann ein Blinker schöner montiert werden. Das unschöne, meist recht weit überstehende Blinker Gewinde werden somit unsichtbar.Die Kappen werden im Set mit insgesamt 4 Kappen geliefert und können universell für alle Zubehör Blinker (mit M8 Gewinde verwendet werden).

€7.95*

Japan plug set CB12736 / RS601

320 Japanese plug set for connecting lighting equipment (e.g. indicators on motorcycles).Many accessory indicators (e.g. all Kellermann / Motogadget) have open cable ends. You can order this universal set to connect these easily with cable sets. The set consists of 3.5mm Japen plug-in sleeves.- Plug + rubber sleeves- Single female plug + rubber sleeves- Double plug + rubber sleeves Attention, there are also 3 & 4mm plugs on the market. To connect these to the 3.5mm plugs, simply widen or compress the 3.5 slightly.

€14.95*

Shorty LED taillight CB12392.1M / RS601

The Shorty Pro 2 LED mini taillight is extremely small and intended for installation, for example, a frame. Despite its minimal size, the taillight is with an E-number and legal. We have the taillight until now always (with the help of the welded housing) installed in the rear frame / round arch of motorcycles (see also mounted pictures). But of course it can also be installed in a fairing or similar. The matching weld-in housing to the Shorty tail light, you will find under the accessories in this description. Dimensions: Width: 40 mm Height: 8,5 mm Depth: 13 mm Technical data: Yellow cable = driving light (+) Red cable = brake light (+) Black cable = ground (-)

€24.95*

Details

Headlight cable extension CB11758 / RS601

Adapter cable to extend the original H4 headlight cable.Very handy if you need to put the wiring of the motorcycle under the tank.

€19.95*

Dynamic rear light safety sensor CB11847 / RS610

The Rizoma DBL system is a safety device that activates a flashing brake light to warn vehicles behind an intense and sudden braking. The device is activated when properly mounted on the motorcycle when the vehicle makes a sudden deceleration / emergency stop by flashing the brake light at a frequency of 4 Hz (flickering light as known from cars during an emergency stop). The system only works at speeds of 40 km/h and above. The DBL-Box can easily be connected to the rear light of the motorcycle or to a combination indicator.The sensor is an acceleration sensor and therefore does not need a connection to the brake hydraulics.

€118.00*

Standlicht Adapter für LED Scheinwerfer Umbau CB11884 / RS620

Mit dieserm Adapter kann man ganz einfach, ohne Kabel abzuschneiden und zu löten, das Standlicht eines LED Scheinwerfers an ein Motorrad anschließen, das serienmäßig einen einfachen H4 Scheinwerfer mit Standlichtbirne hat.

€6.95*

Cable connector for the orignal Triumph flasher CB10825 / RS620

Those who have cut the original turn signal cable harness side and want to have everything original again, needs these plugs. Can also be used as a plug-in connector for accessory flashers etc. together with our counter part number cb10825.

€8.90*

LED parking light bulb CB12612 / RS660

This LED parking light bulb produces a very modern, bright white LED light, perfectly matching the Phillips LED bulb we sell. This makes the headlight light of a simple H4 headlight look much more modern. In addition to the parking light bulb, we also recommend replacing the main headlight bulb with an LED version. The bulb for the main headlight can be found under accessories in this description. Note for BMW R nineT motorcycles:An additional resistor is required to install the LED bulb on an R9T and not have an error displayed in the speedometer (this can be found under accessories in this product description).

€14.90*

Parking Light Bulb Clear Light CB11885 / RS660

This parking light bulb produces a modern white, slightly bluish light. Thus the headlight light of a simple H4 headlight appears clearly modern. Looks especially good in combination with the Night Breakt bulb on the air-cooled Triumph models.

€7.95*

Lighting and accessories for your air-cooled Triumph Modern Classic bike built up to 2015

The right lighting and accessories are essential to make your Bonneville, Thruxton and Scrambler, carburettor or EFI, both safe and stylish. Whether you need new indicators, an indicator/rear light combination, a new headlight and headlight holder, a bright rear light or the right cables, at Classicbike Raisch you will find everything you need to light up your air-cooled Triumph Modern Classic. Invest in high-quality products to not only increase safety, but also to perfectly customise the look of your motorcycle.