The Silverstone Seat for Triumph Bonneville T100 - T120 and Stree Twin - Cup - Scrambler is a really nice narrow & short seat.This makes the rear look much more delicate. By the very strongly beveled edges of the seat, the bike gets a much narrower look. Due to the shape of the seat, which is narrower than the original, the frame tubes are exposed / made visible. In addition, the seat has a particularly clean & beautiful transition to the tank. Due to the padding that rises at the front of the tank, you also get a bit more seating comfort. When braking hard, you no longer slide against the hard tank but in the cushion. The assembly of the seat is quite simple. Simply make the original off and the new on it. The Silverstone seat is attached and locked just like the original with the key lock. For all Tamarit bench seats, a very high quality seat cushion foam is chosen to ensure the highest possible seating comfort.The bench is handmade in Spain. The materials chosen for the base is a high quality fiberglass. The cover is one of the finest imitation leather you can get (are from shipbuilding). These look and feel almost like real leather. But have the advantage that they are absolutely easy to clean and you also have no problems with a wet bench, in the rain. Dimensions: 73x25x12 cm Note to Bonneville: The seat does not fit in conjunction with the original passenger grab rail.

Jarama Seat from Tamarit Motorcycles fits all air cooled Triumph Modern Classic models.The seat gives your Twinden look of a real, classic cafe racer. Photos say more than words here I would say.Looks especially good in combination with our HeckWeck Kit. The bench is simply plug&play against the original seat and attached with the same two screws. As with all Tamarit parts, the Monaco Seat is handcrafted from the best materials available. The Jerez seat is made of fiberglass, polyurethane and nautical fabric. All these materials are weather resistant.So upholstery is a high quality foam for the most comfortable seat possible, despite the thin cushion.The leather is one of the highest quality leatherette available. Visually, there is virtually no difference to real leather. However, imitation leather has the advantage that it is easier to care for and does not get wet in the rain.The cover is available in black or brown. The upholstery is particularly eye-catching due to its unique quilted pattern. Dimensions of the seat: 74x28x16 The Monaco Seat can be ordered either in unpainted (Raw) or gloss black (Jet Black).

Finally there is a really nice narrow seat that does not go over the frame tubes. For a sleek look. Genuine leather seat in rustic look with quilted ribbed pattern. The seats are very well made and especially the genuine leather in vintage look really makes a statement! A real eye-catcher. Due to the very high quality upholstery, the bench is very long-distance suitable despite its narrow design (we have tested ourselves). In addition, it does not suck water, even if the motorcycle times a few days in the rain (we have also tested several times on meetings). The black is a black with a slight anthracite tinge, which is simply because it is real leather (who would like to have them really black, they must simply grease with black leather grease).   Classicbike-Raisch Tip: We also offer matching leather tank pads, made from the same leather. In combination this looks very elegant. The tankpad you will find under the accessories articles in this description.

Finally there is a really nice narrow seat that does not go over the frame tubes. For a sleek look. Genuine leather seat in rustic look, with quilted diamond pattern. The seats are very well finished and especially the genuine leather in vintage look really makes a statement! A real eye-catcher. Due to the very high quality upholstery, the bench is very long-distance suitable despite its narrow design (we have tested ourselves). In addition, it does not suck water, even if the motorcycle times a few days in the rain (we have also tested several times on meetings). The black is a black with a slight anthracite tinge, which is simply because it is real leather (who would like to have them really black, they must simply grease with black leather grease). The pictures with the black Bonneville is the identical seat only with the ribbed stitching.   Classicbike-Raisch Tip: We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant. The tankpad you will find under the accessories articles in this description.

Quilted Narrow Bench for all Triumph Bonenville, Thruxton & Scrambler AC models. The Beach Seat is much narrower and a bit shorter than the original seat, which gives a slimmer line and exposes the frame tubes. The seat is covered with imitation leather and is a somewhat cheaper alternative to the Cool Seats from our range.

Narrow seat for all Triumph Bonenville, Thruxton & Scrambler AC models with diamond stitching.The Beach Seat is much narrower and a bit shorter than the original seat, which gives a slimmer line and exposes the frame tubes. The seat is covered with imitation leather and is a somewhat cheaper alternative to the Cool Seats from our range.

This 2 man bench impresses with its beautiful diamond pattern with double stitching. High-quality artificial leather and good workmanship ensure a long life. An absolute great price / performance ratio.

Extra narrow seat with the frame tubes exposed (like the coolseat) as a king & queen variant. Since not everyone likes the flat look of the cool seat. Genuine leather seat in rustic look with quilted rib pattern. The seats are very well made and especially the genuine leather in vintage look really makes a statement! A real eye-catcher. Due to the very high quality upholstery, the bench is very long-distance suitable despite its narrow design (we have tested ourselves). In addition, it does not suck water, even if the motorcycle times a few days in the rain (we have also tested several times on meetings). The black is a black with a slight anthracite tinge, which is simply because it is real leather (who would like to have them really black, they must simply grease with black leather grease).   Classicbike-Raisch Tip: We also offer matching leather tank pads, made from the same leather. In combination this looks very elegant. The tankpad you will find under the accessories articles in this description.

Genuine leather seat in vintage style in extra narrow so that the frame tubes are visible. The seats are very well finished and especially the genuine leather in vintage look really makes a difference! A real eye-catcher. Due to the very high-quality upholstery, the seat is very long-distance suitable despite its narrow design (we have tested ourselves). In addition, it does not suck water, even if the motorcycle times a few days in the rain (we have also tested several times at meetings).The small integrated pocket not only looks really cool, it is also very practical! Cell phone & wallet before the ride put in and you do not have to constantly grab the pockets to check that nothing slips out.   The anthracite is a color that goes slightly in the direction of black (so a very dark anthracite). If you like it black, you can simply rub the seat a bit with black leather grease and it will be black.   Classicbike-Raisch Tip: We also offer matching leather tank pads, made from the same leather. In combination it looks very elegant. The tankpad you will find under the accessories articles in this description.

Genuine leather seat benches with chic CafeRacer hump. Following the Cool Seats, there are now CafeRacer seat benches that expose the frame tubes. For a sleek look. Genuine leather seat with a rustic look, as the leather has a really nice grain. Due to the very high quality upholstery, the seat is very long distance capable despite its narrow design (we tested it ourselves). In addition, it does not suck water, even if the motorcycle times a few days in the rain (we have also tested several times at meetings). The seats are very well made and especially the real leather in vintage look makes a real eye-catcher! A real eye-catcher. The black is a black with a slight anthracite tinge, which is simply because it is genuine leather (who would like to have them really black, they must simply grease a bit with black leather grease).   Classicbike-Raisch Tip: We also offer matching leather tank pads, made from the same leather. In combination it looks very elegant. The tankpad you will find under the accessories in this description.

The optimal companion for comfortable sitting!Who does not know it on long tours? At some point, the backside simply hurts. With this seat cushion, which consists of many individual air chambers, the problem is solved. The cushion can be inflated to different degrees of hardness depending on your needs.It is also perfectly suited for bikes that have extremely narrow and not very comfortable benches for optical reasons.Enjoy long tours to the finish: the TRAVELLER comfort cushion with an air cushion made of durable polyurethane relieves the back and buttocks. The comfortable, vibration-absorbing bench seat supports good circulation and prevents painful pressure points. In addition, the air honeycombs and the breathable spacer fabric reduce heat and perspiration.A non-slip underside and the circumferential retaining straps guarantee the safe positioning of the seat cushion. The bi-elastic, robust imitation leather surface provides special seating comfort. An integrated valve allows the air volume to be varied for greater comfort or a more intensive ride feeling on winding mountain tours.     Relief for back and buttocks     Prevents numbness and painful pressure points     Reduces heat and perspiration due to the breathable spacer fabric of the cover and inner padding with interconnected air honeycombs     Especially high vibration damping     Integrated valve allows variable air filling     Two sturdy straps with ROK straps and anti-slip underside for precise positioning     Theft protection by fixing under the seat     Surface made of robust, bi-elastic artificial leather for special seating comfort     Waterproof interior: Air cushion made of polyurethane dimensions:     Small: 22,0 x 30,0 cm     Medium: 30,5 x 30,0 cm     Large: 33,5 x 38,0 cm

Hoeckersitzbank in classic cafe racer style from autentischen, high-quality artist. With well-sewn diamond pattern. The seat is really well processed (especially the emblems is almost 1zu1 as the original).

Seat and fender combination. This beautiful Flat Track of the company JVB, gives your machine a whole new Loook! Perfect fit for Scrambler, Flat Track and Bobber conversions. Gives the tail in conjunction with the seat of the machine a nice flat line. The tail is available in two versions (please choose). Version1: The kit can be plug & play to an original motorcycle. Version2: The tail is shorter and the rear frame of the machine must be shortened / cut off. This is of course more effort, but also looks very good when the tail is a bit shorter. Matching license plate holder & license plate light holder can be found in the accessories of this description. The tail light is included.

Seat bench screws in long (45mm). These screws end approximately with the original SItzbank.For those who want it even more practical than the short ones.

Extra long aluminium seat screw (70mm) to remove the seat without tools.These screws are a bit longer than the original seat.

Seatbolt aluminum black SHORT and invisible .. Still no tools.

Knurled screw pair for the Thruxton seat cover.Much nicer than the originals and also much more practical, because no tools are needed.The screws have a knurled attachment. Because of this they can be turned perfectly with the hand on us.