Please choose your bike
Tacho Down / Tieferlegungs Kit CB00241 / RS1
Tacho-Down Kit. Lowering the tachometer speedometer unit for a better look. The picture says more than 1000 words. Aluminum plate laser cut and black coated. Easy construction. Fits exclusively for EFI Bonnie + Thruxton with DIGITAL KM display. For the scrambler, the lamp holder 143T024 (above) must be installed

€49.90*
Breakoutbox CB00216M / RS8
Motogadget. Break-Out Box. For connecting Motogadget instruments to the injection models with electronic speedometer. Tested by us for 2010/11+2012/13/14/15. Please state motorcycle type and chassis number when ordering! It does not need to be soldered, but must be connected consistently according to our enclosed instructions. The CAN bus installed in the Triumph models reacted immediately by refusing to work if the original instrument was no longer connected. This meant that the desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. In addition to information such as speed and rpm, the mo.tri also provides signals for indicator lights: Blinker left/right, tank reserve, fault memory, high beam, neutral, H2O hot, oil pressure. Some indicator lights on instruments with 4 or 5 LEDs have multiple functions. Another big advantage is the almost foolproof installation! The original connector is used and the cables for the instrument and indicator lights are connected to the terminals of the mo.tri using a color scheme. No soldering or searching for cables required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A big time saver and therefore worth hard cash.   PLEASE STATE YEAR OF MANUFACTURE AND CHASSIS NUMBER!

€199.00*
Outside Cup for CHrono Classic Speedo CB00211M / RS101
Outside Cup for the Motogadget Chrono Classic Speedo.

From €59.00*
Mounting bracket CB00212 / RS102
Mounting plate MSC-A Black or silver. 2 cylinders

€23.00*
Air temperature sensor CB00214 / RS103
Lufttemperatur Geber für Motogadget Chrono Classic Tacho.

€20.00*
Oil temperature sensor CB00215 / RS104
Temperature sensor for oil 14X1.5 2 cylinders

€24.00*
Bracket black CB00231M / RS108

From €39.90*
Cup for Motogadget Speedster & Tiney CB00233M / RS109
Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

From €39.00*
Vintage Cup CB00236 / RS110
Vintage Cup: Beautiful copper outer cup for mounting between the handlebars. The eyecatcher par excellence. Fits for Motoscope mst. Vintage. Available with mounting bracket for 22mm handlebars or 1 handlebars.

€119.00*
Motosign Mini CB00253 / RS113
Motosign mini black control lamps

€89.00*
MSM Halteblech CB00254 / RS114
Motogadget MSM Bracket bracket c Black

€26.00*
Switch CB00213M / RS151
Stainless steel button to set the speedometer menu.This button can be used e.g. simply integrate it into the retaining plate of the speedometer and can then jump around in the menu of the speedometer and adjust everything.

From €18.05*
Motogadget holding plate for Chrono Classic, Tiny & Speedster CB10737M / RS152
Fits for Triumph Bonneville, Scrambler & Thruxton. (Does not fit for Scrambler who are before BJ 2010. The holder is suitable for the big chrono and the little Tiny as well as the Speedster black

From €39.95*
Spacer CB00269M / RS200
Spacer Front wheel As a replacement for tachometer worms after installation of a digital tachometer

From €24.95*
Streamline Cup for Chrono Classic CB00237 / RS600
Colour: Polished | Measure: 22mm
The msc Streamline-Cup for 1 inch handlebars is suitable for the assembly of all Classic instruments. Elaborately turned from the solid / milled and highly polished Streamline Cup. Stable attachment with handlebar clamp to 1 inch / inch handlebars. A real eye-catcher for every custom bike.

€175.00*
Streamline Cup CB11481M / RS600
The mst Groove Cup allows the installation of all analogue tokens of the series tiny at 22mm and 1 inch handlebars. Elaborately made from the solid turned / milled and black anodized Groove Cup for the series Tiny with stylish contrast milling. The mounting clamp is precisely lasered and bent from aluminum and allows a simple but safe mounting on the handlebar. The finish of the Groove Cup with the sculpted lines fits perfectly with the design of the instruments. Diameter 56 mm, length 60 mm.

From €88.99*