Motogadget Handlebar Indicator M.Blaze Disc
€99.95*
Available, delivery time: 1-3 days
Zubehörartikel
from €39.00*
€12.95*
€129.00*
€99.00*
from €39.00*
€99.00*
€8.90*
€99.00*
| item number: | 6002011 |
| Product number: | CB11132.2M |
Product information "Motogadget Handlebar Indicator M.Blaze Disc"
Noble handlebar end turn signals from Motogadget. The housing is CNC machined from aluminum. Because the indicators are so flat and have a clear glass, they are as good as not noticeable. Nestle by the appropriate size very perfectly to most handlebar grips.
Are very visible from the front and are also seen from behind (for behind, however, they are not recognized in the StvO as turn signals).
Fit all handlebar sizes accessory handlebars with an Inndendurchmesser of 14mm - 21mm. In most original handlebars fit the turn signals unfortunately not. For BMW R nineT models, however, there are suitable adapters for the original handlebar (see accessory article in this description).
More elegant and cleverly solved you can not install a turn signal for the front. The aluminum housing in conjunction with the clear glass pane is an absolute eye-catcher.
To get a particularly clean front, we recommend the Motogadget turn signals in combination with the perfectly matching handlebar end mirrors from Motogadget to combine. Matching adapters for this, in order not to have to move the fittings on the handlebars, are of course also available from Motogadget (everything can be found under the accessories in this description).
If you want it to be perfect, you can order the matching handlebar grips (in the same diameter as the turn signals) from Motogadget.
The optical turn signal counterpart for the rear (Motogadget Pin) can be found in the accessories of this description.
For easy installation of the turn signals, we recommend model-specific turn signal plugs, so that nothing has to be cut off the original wiring harness.
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| BMW R nineT |
R nineT /5
R nineT Classic / Roadster EU 3
R nineT Classic / Roadster EU 4
R nineT Classic / Roadster EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12 Cruiser
R12 S
R12 nineT
|
| Triumph 400er |
Scrambler 400 X
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
600
600
600
600
There aren't any asked questions yet.
Zubehörartikel
Motogadget m.blaze Pin Indicators
CB11047.1M
/ RS1
From
€39.00*
The new pin sets new standards for surface-mounted indicators with power LED technology.Its tiny dimensions and reduced design almost make it disappear on the vehicle. As soon as it lights up, IntensiLED® Technology makes it extremely bright and definitely impossible to miss.In addition, the patented TranzLight® Technology (TLT) with a large beam angle ensures optimum visibility and safety.The indicator has ECE approval as front and rear direction indicator. The aluminium housing is CNC-turned and available in black anodised or highly polished finish. The Bilnker are sold individually.
Indicator cables BMW
CB11357
/ RS0
€12.95*
With these cable adapters accessory flashers can be easily connected to the original harness without cutting this broken. On most common turn signals, the opposite side of the cable fits on all Rizoma turn signals.
Motogadget M.View Sport 130 Mirror
CB11624
/ RS0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Spy Mirror
CB11626
/ RS0
€99.00*
Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.Grip Soft Handles
CB11629M
/ RS0
From
€39.00*
The m.grip soft is a universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in an attractive look.These grips are perfect in combination with the Motogadget handlebar ends mirrors & indicators, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & indicators can be found in the accessories of this description).
Motogadget Disc / Cone Adapter
CB12033
/ RS600
€99.00*
Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted without having to move the fittings on the handlebars further inwards.In addition, the Motogadget M.Blaze Disc handlebar end turn signal can be mounted on the outside of the adapter.
It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end turn signal. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise as well as mo.view street.
It is CNC machined from billet aluminum and anodized black. The clamping in the handlebar end is done by tightening a M6 screw inside the adapter, which expands the clamping pieces and allows a stable mounting. Then the mirror clamp on the adapter is tightened and thus simultaneously clamped the handlebar end turn signal.
The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push button fittings mo.switch basic and mo.switch mini.
They are mounted directly in the end of the handlebar (22 mm, 7/8 and 1 inch) with a free inner diameter of 12 to 21 mm (without internal thread) and a length of 90 mm.
Dimensions:Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mm.Total length: approx. 105 mm, at least 90 mm free inner tube length requiredWidth of clamping surface for mirror: 8 mm, fits all mo.view handlebar end mirrors Diameter of clamping surface: 1 inch, fits all mo.view handlebar end mirrors Weight (1 piece): 55 g
Scope of delivery:2 x bar adapter uni disc/cone, instructions
Attention does not fit on motorbikes with original handlebars that are not hollow from the inside (which is the case with almost all original handlebars).
Blinker LC Indicator side
CB11072
/ RS-20
€8.90*
The matching flasher in the set (4 pieces for a pair of turn signals) in order not to cut the original wiring harness. These plugs are crimped onto the cables of the turn signals and can then be easily and quickly plugged on the cable harness side.
Motogadget M.View Road Mirror
CB11623
/ RS0
€99.00*
Motogadget M.View Road handlebar ends mirror in a sporty classic oval design(road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625
/ RS0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.Grip Metal Handles
CB11628
/ RS0
€139.00*
Colour:
Polished
The M.Grip is a universal aluminium handlebar for all common handlebar diameters with 1 inch or 22 mm (7/8 inch) tube diameter.These grips are perfect in conjunction with the Motogadget handlebar ends mirrors & turn signals, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & turn signals can be found in the accessories of this description).Aluminium CNC milled.The clamping of the grip sleeve is concealed from the outside by a screwed inner ring. This clamping on handlebars or throttle grip is done precisely by 6 set screws made of stainless steel.The block profiling in the hand area creates a very good grip feeling.Always 2 grip sleeves are delivered as a pair.If replacement is required, individual grip sleeves can also be supplied on request. If you prefer rubber grips, you will find the same design in the m.grip soft.Important: If in doubt, please measure the inner part of the throttle grip. This should be less than 29 mm.Please always order the end caps m.grip cap separately if you want to use the handles without m.blaze disc or cone.
Motogadget M.View Bar Adapter Disc - BMW
CB11864
/ RS1
€59.00*
A pair of Motogadget handlebar extensions + mounting for Motogadget Disc handlebar end mirrors especially designed for all BMW R nine T models, which allows to mount all Motogadget M.View handlebar end mirrors on the handlebars without having to move the instruments further inwards. In addition, the Motogadget Disc handlebar end indicator is clicked onto the end of the adapter. This ensures an absolutely perfect and transition free line! Furthermore the adapters in combination with the Motogadget handlebar end mirrors offer a perfect handlebar end (see photos).
The adapter creates a clamping surface for the bar end mirror outside of the steering tube. Suitable for all Motogadget bar end mirrors. We also recommend the Motogadget handlebar grips, which have exactly the same outer dimensions as the mirrors and the adapters, then you have a completely clean line on the handlebar.
The special adapters, developed for the R nine T models, allows a very easy and very fast mounting on the original handlebars of the BMW. Simply remove the original bar end caps from the handlebar screws and screw the new Motogadget adapters into the original handlebar.
Fits all BMW handlebars with M12 thread
Total length: approx. 47 mmwidth of the clamping surface for mirrors: 8 mm, fits all mo.view handlebar mirrors diameter of the clamping surface: 1 inch, fits all mo.view handlebar mirrors Weight (1 piece): approx. 50 g
The adapters are supplied as pairs.
Cable connector for the orignal Triumph flasher
CB10825
/ RS620
€8.90*
Those who have cut the original turn signal cable harness side and want to have everything original again, needs these plugs.
Can also be used as a plug-in connector for accessory flashers etc. together with our counter part number cb10825.