Coating original parts black

Please choose your bike

Coating BMW footrests black CB11967 / RS0

Like most metal parts on the R9T's, the footrest carrier plate and the heel guard also have the unsightly die-cast surface, which doesn't look very classy. But we can also powder coat these in black! Many would like to have a black footrest system. The first consideration would be a completely new footrest system, e.g. from LSL or Rizoma, which is clearly the best solution. But if that is too expensive for you, you can get an inexpensive alternative by having the carrier plate and the heel guard coated in black, ordering black footrests and, if necessary, a black gear lever (you can find suitable items under the accessory products in this description). You simply send us your two footrest carrier plates + heel guard on the right, we sandblast them, tape off all the areas that need to remain free and coat them black (RAL9005) The brake light switch is attached to the footrest carrier plate ex works with 2 grooved nails. These must be drilled out for coating and then hammered in again (you can order new dowel pins, see accessories in this description). If you do not want to do this work yourself, you can order the article "Drill out / hammer in notched nails R9T carrier plate" (see accessories article). Please send the footrest system completely disassembled! In other words, remove footrests, levers, etc. everything. It will take approx. 4 - 6 weeks until you have your part coated in black again.

€130.00*

Shift lever BMW black coating CB12112 / RS0

Like most metal parts on the R9T's, the shift levers have the unsightly die-cast surface, which doesn't look very classy. But we can also powder coat them black for you! Together with the black coating of the footrest system of your R9T (see accessories article in this description), you get a completely black footrest system. You simply send us your gear lever, we sandblast it, tape off all the areas that need to remain free and coat it black (RAL9005). Please do NOT send us the rubber of the gear lever. Duration until you have your part coated black again: approx. 4 - 6 weeks.

€45.00*

Coating triple clamps black CB11476 / RS0

Fork bridge BMW R nineT / R12 - black powder coating. BLACK BLACK BLACK. Like so many parts on the R9Ts, the triple clamps also have the unsightly die-cast surface look, which doesn't look particularly classy! To give the triple clamps a beautiful & smooth surface in black, we also offer powder coating in black (other colours only on request and with exact RAL colour specification). The following can be made black: upper & lower triple clamp. We also recommend powder coating the lamp holder and the steering damper holder in black (both parts can be found under accessories in this description). It will take about 4 - 6 weeks until you have the part back.

€155.00*

Coating speedo rings black CB11478M / RS0

The speedometer rings in black are also a must! Where does the driver look more often than at the speedometer? And if you like black, you have to have the rings in black too! It takes about 4 - 6 weeks until you get the part back. We always make the parts in satin black as standard. A number of other colours are of course also possible on request (however, the exact RAL shade must then be specified).

€30.00*

Details

Top fork bridge R9T Racer black coating CB11646 / RS0

BLACK BLACK BLACK. Like so many parts on the R9T models, the upper (visible) fork bridge of the R9T Racer also has the unsightly die-cast surface look, which doesn't look particularly classy! To give the triple clamps a nice & smooth surface in black, we also offer powder coating in black. (other colours only on request and with exact RAL tone specification!) It takes about 4 - 6 weeks until you get the part back.

€85.00*

Coating handlebar mounts black - BMW CB12599 / RS0

Fancy black? If you want a black line on your bike, you should also have the original, actually beautiful handlebar mount coated black. It will take about 4 - 6 weeks until you have the part back.

€90.00*

Screw Set Black R9T CB11442 / RS0

A complete stainless steel Torx bolt set with black coated screw heads for BMW R9T. True to the motto "Black is beautiful" almost all visible screws in black are included in the set to replace them with the original ones. All included screws are A2-70 stainless steel and have been powder coated in a nice black matte. Optically great, if the screws should not attract attention. No chipping off the paint! The screws are neatly packed in bags for the respective engine cover. The exchange is thus very easy. It is exchanged one screw after the other. As a result, no new seals are needed. The end cover screws are included in this set. The kit includes the screws (cylinder head, as well as Linsenkopf) and needed U-washers for: - front cover - Crankshaft sensor - Oil cooler cover - Oil cooler mounting - Oil cooler line - Oil cooler supply line - Oil cooler line return - starters - intake manifold - Apprentice trainee - Throttle valve switch

€58.90*

Front cover screws Black R9T CB11443 / RS0

Stainless steel Torx bolt set for the front cover of the BMW R9T. True to the motto "Black is beautiful" are in the screw set all the screws to replace it with the original silver on the front cover of the R9T. All screws included (ISO 14579) are A2-70 stainless steel and have been powder coated in a beautiful black matte finish. No chipping off the paint! The screws are neatly packed in bags for the respective engine cover. The exchange is thus very easy. It is exchanged one screw after the other. As a result, no new seals are needed.

€34.90*

Powder-coated black BMW lamp ring CB11436 / RS0

True to the motto "black is beautiful", you can send us your silver lamp ring and we will send it back to you coated in black. It will take between 4 - 6 weeks to get the part back. We always make the parts in black silk matt as standard. Several other colours are of course also possible on request.

€35.00*

Powder-coated black BMW lamp pot CB11703 / RS0

True to the motto "black is beautiful", you can send us your original BMW R nine T lamp top and we will send it back to you coated in black. It will take between 4 and 6 weeks to get the part back. We always make the parts in black silk matt as standard. Several other colours are of course also possible on request.

€55.00*

Frame triangle black powder-coated CB10734 / RS1

Colour: Black

If the cast triangle doesn't look classy enough, if you don't like the silver or simply want it black (black is beautiful), we can have it powder-coated black by us. It takes about 4 - 6 weeks until you have the part back. If you would also like to have the sleeves coated black, you can also order this (see accessories in this description). As standard, we always make the parts in black silk matt or black gloss (please select). Other colours are of course also possible on request. The price is for the coating of both triangles.

€80.00*

Frame triangle black powder-coated with accent CB11454 / RS1

Colour: Black

If the cast triangle doesn't look classy enough (as the original surface makes a rather cheap impression), if you don't like the silver, or if you simply want it black (black is beautiful), we offer you the option of having it powder-coated black by us. In this version, the original holes are reworked by us after coating. This gives them a silver edge, which makes the frame triangle look like a milled part. It takes about 4 - 6 weeks until you have the part back. If you would like to have the sleeves coated in black, you can also order this (see accessories in this description). As standard, we always make the parts in black silk matt or black gloss (please select). Other colours are of course also possible on request. The price is for the coating of both triangles.

€125.00*

BMW fork legs with black coating CB11435M / RS9

If you don't like the original silver fork feet on your R9T, you can simply have them coated black by us. Simply send the disassembled fork to us and you will get it back with black fork feet. If you can't dismantle the fork yourself, you can simply send the whole fork to us and we will do the work for you in our suspension department. If you choose the option with assembly, you simply send us the disassembled fork, we disassemble it here on site and then reassemble it after coating. Directly with better oil, which slightly improves the response behaviour of the fork. It takes about 4 - 6 weeks until you have the part back. We always finish the parts in black silk matt as standard. Several other colours are of course also possible on request. The price is for the coating of both fork legs. Looks particularly good in combination with black fork tubes.

€180.00*

Details

BMW fork black anodising CB11301M / RS9

As many people don't like the golden fork of the R9T, we have been looking for a way to get it reasonably black without having to buy a complete Öhlins fork. We offer a very high-quality black anodised finish for the fork tubes, which gives the bike a completely different look. To do this, the removed, disassembled & cleaned fork tubes must be sent to us. Or you can choose the option with assembly, in which case you simply send us the removed fork, we disassemble it here on site and then reassemble it after anodising. Directly with better oil, which improves the response behaviour of the fork. Anodising and shipping takes between 6 and 10 weeks. If this takes too long, you can opt for new stanchions, which we have in stock (see similar items in this description). Please note: blacking the fork legs is not included (see accessories for extra items).

€259.96*

Details

Coating BMW footrests black CB12321 / RS52

Do you like the original pegs on your bike, but don't like them in silver? Then simply send them to us and we will powder coat them in black silk matt (RAL9005). The price is for ONE PAIR of pegs. Please remove all attachments such as rubbers or similar from the footrests and do NOT send them to us! Please note that the coating in the area where the footrest rests will wear off over time. The processing time is approximately 4 - 6 weeks. Attention! We only offer the coating service here. The original part must be delivered to us by the customer.

€60.00*

Fork stanchions with black DLC coating CB12835 / RS600

DLC coating in black for fork stanchions. Would you like a black fork? Is it not enough for you that the outer tubes and fork legs are black? No problem, you can also have the inner stanchions of your fork DLC coated by us. Either you send us your dismantled tubes and we send them back to you coated or you send us your complete fork, we dismantle it and then send it back to you newly coated and reassembled. Please contact us beforehand so that we can make you an offer for the labour time. Classicbike-Raisch tip: If you would like to have it All Black: We also offer other coatings for the original fork (such as black powder coating of fork legs / black anodising of fork outer tubes). Coating takes approx. 2 - 4 weeks. The price is for a PAIR.

€399.00*

Coat brake lever foot in black CB12319 / RS600

Black is beautiful! True to this motto, we offer you the opportunity to send us almost all metal add-on parts of your bike and we will powder coat them in black silk matt and send them back to you. Simply send us the dismantled brake lever and we will take care of everything else. Processing time approx. 4 - 6 weeks. Please note: we only offer the coating service here. The original part must be delivered to us by the customer.

€45.00*

Coat lamp holder in black CB12378 / RS600

If you have your triple clamps coated black, you should also have the lamp holder of your R nineT coated, as this part is directly attached to the lower triple clamp. It will take about 4 - 6 weeks until you have the part back.

€15.00*

Steering damper bracket with black coating CB12379 / RS600

We can also coat the small steering damper bracket on your nineT in black. We can particularly recommend this if you have your triple clamps coated black, as the bracket is screwed directly to the clamp. It will take about 4 - 6 weeks until you have the part back.

€25.00*

Coat valve cover black CB11051 / RS600

BMW R nineT / R12 valve cover black powder coating. If you don't like the grey of the cylinder head cover because it simply doesn't match the contrast with the cylinder fins, we offer to have it powder-coated black by us. It takes about 4 - 6 weeks to get the part back. We always make the parts in black silk matt as standard. Several other colours are of course also possible on request. The price is for the coating of both valve covers.

€199.00*

Coating air tunnels black CB11052 / RS600

If you don't like the silver of the original air tunnel or simply want it black (black is beautiful), we offer to have it powder-coated black by us. It takes about 4 - 6 weeks until you have the part back. We always make the parts in black silk matt as standard. Several other colours are of course also possible on request.

€60.00*

Mudguard bracket BMW Classic black powder coating CB10735 / RS600

If the cast holders don't look classy enough, if you don't like the silver, or if you simply want it black (black is beautiful), we can have it powder-coated black by us. It takes about 4 - 6 weeks until you have the part back. We always make the parts in black silk matt as standard, but a number of other colours are of course also possible on request. The price is for the coating of both holders.

€65.00*

Black powder-coated mudguard holder CB11647 / RS600

If the unsightly cast surface of the original mudguard bracket on your R9T Racer, Scrambler, Pure or Urban GS doesn't look classy enough, if you don't like the silver, or if you just want it black (black is beautiful), we offer to have it powder-coated black by us. It takes about 4 - 6 weeks until you get the part back. By default, we always make the parts in black silk matt, and other colours are of course also possible on request (but the exact RAL tone must be specified by the customer).

€45.00*

Original BMW manifold black ceramic coating CB12187 / RS600

BMW R nineT / R12 manifold black matt coating You send us your original manifold and we send it back to you with a black coating. The manifold is coated with a heat-resistant coating. The surface is slightly rough and of the highest quality.Unlike many other coatings, it is also less sensitive to contact (e.g. with a shoe) and retains its deep black colour for many years.Especially with the R12 models, coating the manifold is highly recommended, because the very large cat collector in black is much less noticeable on the motorbike. This takes approx. 4 - 6 weeks. The price is only for the complete manifold including catalytic converter (bracket, clamp or other things that are given with it will be charged additionally).

€380.00*

Details

Coating handlebar risers BMW CB11477 / RS601

You have a black handlebar clamp on your R9T and would like to have the risers in matching black?No problem, send us your handlebar riser and we will take care of the powder coating. It will take about 4 - 6 weeks until you have the part back. We always make the parts in black silk matt as standard. A number of other colours are of course also possible on request (however, the exact RAL shade must then be specified).

€40.00*

ESD black ceramic coating CB10701 / RS601

We can coat your original rear silencer in black. Many people would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original exhaust and we will coat it in matt black with a heat-resistant ceramic coating. Takes approx. 2 - 4 weeks.

€340.00*

Coating the exhaust bracket disc black CB11053 / RS800

Anyone who has the original exhaust bracket coated black usually also wants the disc to be black.Simply send the disc to us and we will take care of everything. It takes about 4 - 6 weeks until you have the part back. We always make the parts in satin black as standard.

€20.00*

Tip

Coat frame triangle sleeves black CB12441 / RS800

Many people who have the original frame triangles coated black would also like to have the sleeves in black. Simply order this article and send it to us. It takes about 4 - 6 weeks until you get the part back. We always make the parts in black silk matt as standard.

€20.00*

Exhaust bracket sleeve black coating CB12636 / RS800

If you have the original exhaust bracket coated black, you will usually also want the sleeve that sits in the bracket to be black as well.Simply send the disc to us and we will take care of everything. It takes about 4 - 6 weeks to get the part back. We always make the parts in black silk matt as standard.

€20.00*