Please choose your bike
BMW - Milled expansion tank covers
CB12318.1M
/ RS0
€109.00*
A pair of CNC milled aluminum expansion tank covers for BMW R nineT models.
The covers are manufactured in Germany using a 3D milling process. Afterwards they are glass bead blasted and black anodized. This results in an incredibly high-quality, rough surface that also perfectly matches the original fittings of the R9T models.After anodizing, the covers are milled again to achieve the beautiful BMW character structure.
The milled BMW logo gives the fittings on your R nineT a very elegant look.
The expansion tank covers are simply replaced with the original ones, which can be done in just a few minutes.
Classicbike-Raisch tip:You will find black screws among the accessories in this product description. These are much less noticeable and make the covers look even more elegant.
Radiator grille - R9T / R12
CB12388
/ RS0
€79.95*
Classicbike-Raisch aluminum protective grille for the oil cooler of all BMW R nineT & R12 models.Made in Germany!
The protective grille serves two purposes.First and foremost, it protects the radiator from rough stone chips, which is especially important if you are also a bit off road.In addition, the grille also looks visually nicer, and hints at the BMW logo.Due to the many slots, sufficient cooling is guaranteed.
The grid is made of aluminum and is laser cut and edged by hand in our region. Subsequently, the Gitte is coated black powder.
%
Beeline Moto Navi
CB12245M
/ RS0
€149.00*
€179.00*
(16.76% saved)
The Beeline Moto navigation system is the smallest and smartest motorcycle navigation system available in the world.Visually, the Beeline Navi is virtually just a small black button, which you have within seconds on the motorcycle and off again.
The navigation of this navigator works via a file and km displays on the display of the Beeline. The special thing about this navigation system is that it has two different navigation modes:
1. classic exact navigation, where an exact route is determined. Here, the navigator gives a precise route with turns, km information, etc..
2. directional navigation, where the navigator gives only one direction. In this mode the Beeline works like a compass. You give the Navi a destination and it shows you via the arrow only one direction in which you have to go. In my opinion, this is a very cool way to navigate for motorcycles. Because with the motorcycle is usually the way the goal and the driver can think about his own route and hold his nose at will in the wind.
The routes are set with a smart phone and the appropriate Beeline navigation app.
Be sure to check out the video at the end of the description to get to know all the features of the Beeline Navi in detail!
Another very good thing about the Navi is the long battery life of 30Std.
In the scope of delivery are 2 mounting systems included (1x the Sticky Pad Mount System / 1x the Strap Mount System. Both items can also be found under the accessories in this description, if you want to read in more detail how these mounts work).3 Other mounting options are also available (you can also find these under the accessory items in this description).
Finishes: In the black version, the case is made of plastic. In the silver & gunmetal version, the case is made of metal.
Included in delivery:
1 navigation device BEELINE Moto in black
1 navigation mount "Sticky Pad
1 navigation mount "Universal Strap Mount
1 USB charging cable
Fits all motorcycles and scooters
Waterproof and shockproof
Two navigation modes
Four buttons (glove friendly)
Diameter of active area: 30 mm
Worldwide coverage (Google Maps)
Record & share rides
Strava integration & GPX import
Automatic backlight for night riding
Lifetime app and firmware updates
App supports the following languages: English, German, French and Japanese
Mobile Phone Requirements:
iPhone - iOS 9.2 and above OR Android phone with Google Play - 7.0 Nougat and above.
Bluetooth 4.0 capability required
Battery
Capacity: 400mAh
Battery operating time: without backlight: 30 hours - with backlight: 10 hours - mixed: 20 hours
Battery life in standby: 2-3 months
Micro USB charging Translated with www.DeepL.com/Translator (free version)
Thunderbolt LED Headlight Kit R9T
CB12233M
/ RS0
€579.00*
Koso Thunderbolt headlight plug & play kit for BMW R nineT models.
The Thunderbolt LED headlight is a very minimalist and flat headlight. With the headlight you can give your machine a really nice flat and close to the motorcycle front. Photos say more than words here.The light of this headlight is simply a poem. It looks on the one hand visually very nice (especially the central strip) and on the other hand it turns night into day. The headlight is really nice and bright and ensures a safe ride even in the dark. The headlight is with E-number and thus street legal.
The kit: Includes the Koso headlight and a very high quality and specially developed for the Koso lamp holder from KRT Framework. Who knows the company knows how perfect and sophisticated the part is.The holder can be installed in two positions (high and low, see photos). In addition, you can adjust the headlight in the angle (this is by the way a TÜV regulation. All holders, where the headlight is mounted rigidly in one position, are not StvO compliant).
The Grid:Especially for the Koso Thunderbolt, our friend Marvin from KRT Framework has developed an absolutely perfect fitting lamp grid (which can also be seen in some of the product photos).The grille is NOT included in this kit. If you want to have the grille, you can find it under the accessories in this description.
For the Euro 4 / Gen-2 models: is also supplied a resistor for the main headlight, which ensures that in the display of the speedometer no error message appears.
In order not to have to cut off the original Galssockel adapter for the parking light, we recommend to order the parking light adapter from our assortment in addition (see accessory article in this description).
Racer / Urbans GS: Fits both models only when the fairing is removed.
Fitting clamp without mirror thread BMW Milled
CB12102M
/ RS0
€38.95*
This CNC machined aluminum clamp replaces the original armature clamps. Fits all for all BMW R9T models.
This makes sense when you convert the motorcycles to handlebar end mirrors, because otherwise you look at the open mirror thread of the original clamp.
In addition, the clamps make optically also really what her through their high-quality surface and the milled BMW logo. Of course, this is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time.
The adapters are black anodized & in the aftermath, the BMW logo is milled again. The clamps look very classy on the handlebars.The new version of the adapter is in a Galsperlen blasted Black Peark optics. The surface is roughened before anodizing, thereby wirk dir surface even more noble and the part shimmers even in sunlight no longer in other colors, as you know it from many anodized parts. In addition, this surface fits perfectly with the fittings of the BMW motorcycles.
The adapters are sold individually.
Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.
Fitting clamp with mirror thread BMW Milled
CB12225M
/ RS0
€39.95*
This CNC machined aluminum clamp replaces the original armature clamps. Suitable for all for all BMW R9T models.
The clamps look much nicer on the one hand, because they are very high quality milled from aluminum and have a nice, indicated BMW logo. In addition, the thread is a good bit shorter than the original part, which means that the mirror no longer sticks out so high.The mirror threads are M10 x 1.25 which allows you to mount all common mirrors from the accessories market.
Of course, such a milled clamping is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time.
The adapters are black matt (matching the original fittings) anodized & in the aftermath, the BMW logo is milled again. The clamps look very classy on the handlebars.
The threaded adapter for the mirror we have extra round Designed, which gives you a much nicer transition to most mirrors than most other adapters on the market, which are simply angular. To the Motogadget M.View mirrors, the transition is perfect.
The adapters are sold individually.
Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.
Indicator Adapter BMW R9T Oil Cooler
CB12106
/ RS0
€44.95*
These indicator adapters, milled from aluminium and black anodised, allow easy mounting of all accessory turn signals with M8 thread on the oil cooler of all BMW R nineT models.
The adapters are screwed onto the tab of the oil cooler (suitable screws are supplied).
The turn signals are then inserted into the adapter and securely fixed from below with a grub screw. With the adapter, the turn signals are mounted so nicely and elegantly on the oil cooler.The clean transition from the indicator to the adapter makes them look almost like a single piece.
We recommend ordering a set of indicator plugs for easy installation so that the plugs on the wiring harness do not have to be cut off (see accessories article in this description). Matching turn signals can also be found in the accessories.
%
Fork Covers with Indicators R9T
CB12096M
/ RS0
€179.95*
A pair of aluminium standpipe covers with integrated LED turn signals for BMW R nineT.
These very high-quality fork covers ensure that the mismatching chrome on the fork disappears and that the fork appears thicker (like an upside down fork). In addition, tiny LED turn signals are integrated into the covers. This does away with the large original turn signals and gives the nineT a really nice clean front.The turn signals are E-numbered and also comply with the prescribed minimum distance (so they are Stvo compliant and legal).
The tubes are elaborately turned on a CNC lathe, have guides for the cables and rubber rings milled into them from the inside. On the outside they have a small flat surface on which the mini LED turn signals are mounted.After that, the covers are glass bead blasted and then anodised either silver or black. This gives the covers a very high-quality matt finish.
The covers are supplied with detailed step-by-step assembly instructions, cable solder connectors, heat shrink tubing and resistors (which are required for some models)
Note Scrambler / Urban GS cover:The indicators on these covers are now mounted horizontally to make them even more inconspicuous.
License support HeckWeck R9T
CB12074
/ RS0
€99.95*
Classicbike-Raisch HeckWeck license plate holder for all BMW R nineT models.
This holder is the perfect mount for our LED Stripe rear kit. It is simply screwed under the LED bracket and then nestles perfectly in the design of the stripe rear. Perfect for all you want to drive one of our LED Stripe rear and do not want to have a side license plate holder.
Also, the holder can be used as a universal holder for custom conversions.
We have designed the holder so that it ensures a safe ride in all driving situations as well as in 2-man operation and the license plate can not pull into the rear wheel.The license plate holder is Stvo compliant and street legal.
The license plate holder is supplied with a LED license plate light (with E-number).
HeckWeck Tail Kit R9T
CB12352M
/ RS0
€189.95*
Classicbike-Raisch HeckWeck Kit made in Germany, suitable for all BMW R nineT models. Street legal! All of our HeckWeck Kits are very minimalistic rear ends that make for a really free and clean rear end. Our HeckWeck kits are designed to have 3-1 turn signals. This means that in the turn signals, rear, brake & turn signal light are integrated simultaneously. For mounting the turn signals, a turn signal holder is included, which sits with the license plate.
Matching 3-1 turn signals, you can order below the description with 10% discount in the set equal to it.
Included in the kit is an aluminum underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line.
Accessories:
Classicbike-Raisch recommends the "cable set R9T for taillight / turn signal combination" for easier installation. This allows you to easily connect the 3-1 turn signals without having to cut what on the wiring harness.
For all those who want to be 100% legal on the road, there is still a reflector in the accessories.
To mount the license plate chic, we recommend the license plate screw set.
All parts you can order below the description, in the set with it.
Scope of delivery:
License plate holder (165mm x 135mm)
LED license plate lighting
Turn signal holder
All mounting materials
Accessories mounting material such as heat shrink tubing, cable ties, etc.
Detailed mounting instructions
Lizenz support HeckWeck R9T - Short
CB12407
/ RS0
€119.95*
Classicbike-Raisch HeckWeck license plate holder - adjustable short version for all BMW R nineT models.
This holder is the perfect mount for our LED Stripe rear kit. It is simply screwed under the LED bracket and then nestles perfectly in the design of the stripe rear. The especially nice thing about the new Short version is that the license plate sits directly under the LED bracket and not as with almost all other rear from the market a good deal to the rear of the nineT protrudes.The license plate size is 170 x 100mm, which covers any license plate size of any country.
To realize the short license plate holder legally, we had to reach into the bag of tricks a bit. Due to the short rear end of the R9T motorcycles, it is not possible to construct a license plate holder that keeps the specified 30° angle and at the same time ensures that the license plate does not come into contact with the rear wheel when the motorcycle compresses really strongly. So we came up with an ingenious adjustment for the license plate that makes it possible to adjust the angle of the license plate.This allows the license plate to be set a little steeper in continuous operation, which of course also looks more awesome. For the TÜV visit or a traffic control is a seconds quick grip with some force on the license plate and everything is legal. See picture 2 & 3.The supplied stop nuts ensure that the license plate can not inadvertently adjust while driving.
In addition, the holder can be used as a universal holder for custom conversions.
The license plate holder is supplied with a LED license plate light (with E-number).
Motogadget Mo.Blaze Tens 1 & 4 Indicator
CB12070.2M
/ RS0
€59.00*
The new Motogadget mo.blaze tens1 & 4 are currently the smallest road legal turn signals in the world. Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they stand out as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range.
Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC milled and available in black anodized or mirror polished finish. In addition, the turn signal is optionally available as a normal turn signal and as a version with position light. The turn signals with position light are ONLY suitable for the front. These shine permanently white and ensure that you are better seen when driving behind.
The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed.
Specifications:
Total length with thread
29 mm
Leangth without thread
11 mm
Largest diameter
11 mm
Wire leangth
ca. 110 cm
Weigth with wire
ca. 20 g
Mounting
M8 Gewindebolzen
Power consumption
ca. 1 Watt
Motogadget Mo.Blaze Tens 3 Indicator/Rearlight
CB12071.1M
/ RS0
€99.00*
The new Motogadget mo.blaze tens3 are currently the smallest street legal 3-1 turn signal / tail light combination turn signals in the world. 3-1 means that these turn signals combine tail light, brake light as well as turn signals in one housing and that legally.Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they are as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range.
Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC machined and available in black anodized or mirror polished finish.
The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed.
Specifications:
Total length with thread
29 mm
Leangth without thread
11 mm
Largest diameter
11 mm
Wire leangth
ca. 110 cm
Weigth with wire
ca. 20 g
Mounting
M8 Gewindebolzen
Power consumption
ca. 1/2/3 Watt
Motogadget Mo.Blaze Tens 2 Taillight
CB12073.1M
/ RS0
€59.00*
The mo.blaze tens2 from motogadget is the smallest taillight/brake light combination in the world.
Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to IntensiLED® Technology and definitely not to be overlooked.
At the same time, the additional lateral beam angle ensures the best visibility and safety.
The taillight / brake light combination has an ECE approval as a rear taillight and brake light. The aluminum housing is CNC machined and available in black anodized or mirror polished finish.
The taillight / brake light combination can be operated like any standard LED light with 12 V.
The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed.
Specifications:
Total length with thread
29 mm
Leangth without thread
11 mm
Largest diameter
11 mm
Wire leangth
ca. 110 cm
Weigth with wire
ca. 20 g
Mounting
M8 Gewindebolzen
Power consumption
ca. 1/1 Watt
Portmonaie Old Boy
CB12066.1M
/ RS0
€54.95*
The leather wallet is handmade in the traditional way, without compromise from the first cut to the last seam. It has no cheap synthetics, fabric, rubber or inserts.
Made from high quality vegetable tanned leather that will last a lifetime and get better with age.
Also included in the package is a removable leather strap. With this, you can be sure it won't fall out of your pocket while driving or get your wallet pulled out of your pocket in the city.
Details:
Main compartment for money and bills3 card slots2 side pockets for the remaining cardsCoin pocket
Wallet "Moto"
CB12281M
/ RS0
€49.95*
Handmade wild leather wallet "Moto" is a very beautiful and slim wallet.
Made from high quality vegetable tanned leather that will last a lifetime and get better with age.
Included with the wallet is a removable black coated chain. With this, you can be sure it won't fall out of your pocket while driving or get your wallet pulled out of your pocket in the city.
Details:
1 main compartment to hold cash3 card slots1 side pocket for the rest of the cardslength of the chain: 17,5 cmdimensions: 10 x 8,5 cm (closed), 10 x 17 cm (opened)
%
Motogadget Mo.Hub BMW R9T
CB12042
/ RS0
€99.00*
€179.00*
(44.69% saved)
Motogadget Mo.Hub single for BMW RnineT Euro4 models from 2017.The Mo. Hub allows to connect the Motogadget speedometers: Mini, Chrono Classic & TIny (see accessory items in this description) almost plug & play (a smartphone with the Motogadget Mo. Ride app is mandatory).Individually, we offer the hub for those customers who want to build their own holder. Otherwise, the hub is also available at a slightly lower price as a kit with a matching holder (see similar articles in this description).
In addition, the Mo.Hub makes it possible to use the Motogadget app Mo.Ride.
Functions Mo.Hub:
The mo.hub receives data like speed, RPM and indicator lights from the digital vehicle bus (LIN bus) and converts them into usable signals for the motoscope tiny or mst speedster. The control lights of the instrument partly represent several functions (by continuous light or flashing). According to the clear assignment table, the vehicle plug and the instrument are connected to the contact strips of the mo.hub. Then only the vehicle plug has to be plugged into the counterpart of the BMW. The connection is ready. This is almost plug & play. Then the smartphone and the mo.ride app are paired with the mo.hub via Bluetooth. This automatically applies all the necessary settings correctly and it can be started immediately.Encrypted connection via Bluetooth® LE (Low Energy), therefore tamper-proofextremely low power consumption of smartphone and mo.hubthe highly sensitive accelerometer allows to display your driving activity in mo.ride by an activity factor, number of turns, top speed and other statisticsmonitoring of the current battery voltage in the appFirmware updates possible without removal at any place via smartphone and appConfiguration possible without removal at any location via smartphone and appVehicle management in the appMaintenance management through automatically updated mileage with notes on maintenance tasks, service tasks, condition of tires, brake pads, oils, operating fluids, spark plugs, etc.Tour tracking records all journeysLogbook stores all generated vehicle messages and maintenance tasksdisplay of parking position and Ping! to help with vehicle searchsoon 'ride mode' will be integrated into the app. There you can compose your own dashboard from different measurements and displays. E.g. timing 0-100 km/h, temperatures, altitude meter, curve counter, tilt angle, compass, fun factor, weather data and much more.
Technical requirements:
The mo.hub is compatible with all models of the RnineT series with Euro 4 (from model year 2017). Also Urban G/S, Pure, Racer and Scrambler. It currently supports the instrument series mini with combi frame, tiny and classic. To install the mo.hub kit, you need our app mo.ride in any case. Without smartphone and app, the mo.hub can not be put into operation! The app works with smartphones that use the Android 8.0 operating system and iOS 12.4 or higher. In rare cases, compatibility may be limited due to the device. More info about the app also at mo.ride.de or in Google Play and iTunes.
Scope of delivery:
mo.hub single BMW R9T LIN -mo.hub with cover and mounting possibility the vehicle connector to the BMW RnineT Euro 4a connection cable with fuse to the battery the detailed installation and operating instructions via the appthe mobile app mo.ride via Google Play and AppStore (free of charge)
ATTENTION: The scope of delivery does not include a speedometer & also no holder. These must be ordered separately.See accessories article in this description.
Moto Master Wave Break Disc BMW R9T
CB12034M
/ RS0
€239.00*
Moto Master Wave brake discs for all BMW R nine T models with KBA number (so do not need to be registered).
The brake discs make visually really what! The discs let your nineT clearly sportier & more aggressive. Looks both at a sporty converted as well as scrambler conversions really cool!
The discs are simply replaced 1 to 1 against the original.
The matching rear brake disc we have of course also in the program. See similar articles.
Attention: the price is for one brake disc, please order left & right.
Moto Master Wave Break Disc BMW R9T rear
CB12035
/ RS0
€109.95*
Moto Master Wave rear brake disc for all BMW R nine T models with KBA number (so do not need to be registered).
The brake disc makes visually really what! The discs let your nineT clearly sportier & more aggressive. Looks both at a sporty converted as well as scrambler conversions really cool! Optimal in conjunction with the Wave brake discs for front (see similar articles in this description).
The disc is simply replaced 1 to 1 against the original.
Cable set R9T for taillight / turn signal combination
CB12036
/ RS0
€49.00*
With this wiring harness you can easily without soldering, cut off plugs or anything else, connect a turn signal / tail light combination (so turn signals with integrated rear & brake light) to his BMW R nine T.
The wiring harness fits plug & play to the to the tail light connector of the nineT models. Who wants to have it quite perfect and nothing cut off, which must still order a set of turn signal plugs (see accessory article in this description) in addition.
The wiring harness then has in contrast to a normal tail light harness 2 connectors for the tail & brake light, as well as two separate cables for the license plate light.
SP Connect Handy Sleeve universal
CB11992M
/ RS0
€29.99*
With the SP Connect UNIVERSAL PHONE CASE you can use almost any Smartphone (maximum phone size see at the bottom of the description) on any SP Connect cell phone cradle from our program.
The perfect universal case for almost any cell phone. No need to buy an expensive, model-specific case for your cell phone, which has to be bought new every time you change your phone.Simply slide the cell phone into the case, roll up the opening and fix it with the velcro surface. This way, your cell phone is protected from rain, sweat, mud and dust while maintaining touchscreen operability. The fleece slip-on insert and the adhesive EVA frame allow you to find the perfect position for your smartphone.The small, inconspicuous SP Connect cell phone holder (must be purchased separately) stays permanently on your bike and when needed, the cell phone is inserted into the case and mounted to the holder in one easy step. This saves you the purchase of an expensive motorcycle navigation system.
Integrated mounting mechanismProtection against rain, sweat, mud and dustTouchscreen operability remains possibleWindow for cameraScratch-free fleece insertReflective security printing
You can find suitable brackets for the motorcycle in the accessories of this product description.
SP Connect handlebar mount Pro
CB11994M
/ RS0
€69.95*
The SP Connect handlebar mount is simply clamped around your handlebars (mounting is done within a few minutes, the handlebars do not have to be disassembled).Then you can attach any SP Conncet Handy Sleeve (e.g. the universal sleeve from our assortment) to the holder with a single movement. Faster, easier and cheaper you can not get a navigation system to your bike.
CNC manufactured from aircraft aluminum
Landscape or portrait mounting
Super stable 360° adjustment in 6° steps
Suitable for standard and oversize handlebars (2.22 / 2.54 / 2.86 / 3.17 cm // or 0.875 / 1.0 / 1.125 / 1.25 inch diameter)
Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines.
The perfect universal cell phone cover for this mount can be found in the accessories of this description.
SP Conncet Clutch / Brake fitting Mounting Pro
CB11995M
/ RS0
€69.95*
The SP Connect clutch/brake fitting bracket is simply attached to the clamp of your clutch or brake fitting. Suitable screws for mounting are included in delivery.Each SP Conncet Handy sleeve (e.g. the universal sleeve from our range) can be attached to the bracket with a single hand movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle.
CNC milled from aluminium
Pivoting and rotating head for perfect alignmentHigh / landscape format
OptionStainless steel screws
Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines.
The perfect universal cell phone cover for this mount can be found in the accessories of this description.
SP Conncet mirror mount Pro
CB11996
/ RS0
€49.95*
The SP Connect mirror mount is easily and quickly clamped around the arm of your mirror (see below for possible mirror arm diameters).
You can then attach any SP Conncet cell phone cover (e.g. the universal cover from our range) to the holder with one simple movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle.
Partly CNC milled aluminum
Pivoting and rotating head for perfect alignment
Landscape or portrait mounting
Super stable 360° adjustment in 6° steps
Suitable for the following mirror diameters: 10 - 16 mm or 0.39 - 0.63 inch
Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines.
The perfect universal cell phone cover for this mount can be found in the accessories of this description.
SP Conncet handlebar clamp bracket Pro
CB11997
/ RS0
€79.95*
The SP Connect handlebar clamp bracket is mounted on the handlebar clamp of your bike.The delivery includes 3 screws for mounting: M8 screws in three different lengths: 40/45/50 mm
Each SP Conncet cell phone cover (e.g. the universal cover from our product range) can be attached to the holder with a single hand movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle
CNC milled from aluminiumPivoting and rotating head for perfect alignmentportrait / landscape optionStainless steel screwsNote: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines.
The perfect universal cell phone cover for this mount can be found in the accessories of this description.
SP Conncet handlebar clamp bracket Pro
CB11998
/ RS0
€69.95*
The SP Connect steering head bracket is inserted into the steering head from above and clamped tightly with an expansion plug. For this it is of course necessary that your motorcycle has an open steering head nut. Perfectly suitable for motorcycles with stub handlebars.The delivery includes different expansion plugs to cover all dimensions (dimensions see below).
Every SP Conncet cell phone cover (e.g. the universal cover from our assortment) can be attached to the holder with a single hand movement. Faster, easier and cheaper you can not get a navigation system to your motorcycle
For Supersport motorcycles (stub handlebars)
CNC-machined from aircraft aluminum
Vibration damping
Portrait / landscape option
Stainless steel hardware
For diameters 12-30mm: 12-15mm, 15-18mm, 18-21mm, 21-24mm, 24-27mm, 27-30mm
Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines.
The perfect universal cell phone cover for this mount can be found in the accessories of this description.
SP Connect universal mount
CB11999
/ RS0
€29.95*
With the Velcro fastener, the SP Connect™ Universal Mount can be attached to rods or tubes with a diameter between 20 and 90mm (0.9 - 3.5 inches). The spring-loaded head allows a tool-free 360° rotation of the attached device. The practical thing about this mount is that it can be quickly attached and detached from the motorcycle. In addition, it is also universal and can be used for many other things.Your smartphone can be securely attached to a bicycle, motorcycle, golf cart or stroller so you can use apps, access playlists, read messages or navigate.
Every SP Conncet cell phone case (e.g. the universal case from our product range) can be attached to the cradle with a single hand movement. Faster, easier and cheaper you can't get a navigation system on your motorcycle
Assembly and adjustment without tools
360° adjustment / 45° step size
For diameters from 20-90mm (0.9-3.5 inches)
2 different velcro lengths
Note: If you are using a smartphone with a mechanical image stabilizer (all modern cell phones have them), we recommend using the additional anti-vibration module (see accessories in this description) to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engines.
The perfect universal cell phone cover for this mount can be found in the accessories of this description.
Anti-Vibrations-Modul SP Conncet
CB12000M
/ RS0
€29.95*
Use the SP Connect ANTI VIBRATION MODULE to further reduce vibrations in different frequency ranges. The development of the new product is a reaction to the complexity of newer smartphone models, whose camera systems consist of increasingly sensitive components. The specially developed elastomer inlay dampens in all directions and thus causes up to 60% less vibrations (e.g.: from the motorcycle engine) to reach your smartphone, which could affect the mechanical image stabilizer of the camera. Your smartphone is protected, but still remains stable and quietly mounted so that you can navigate while driving without any problems.
CNC-machined from aircraft aluminum
3D vibration damping through specially developed elastomer inlay
Landscape or portrait mounting
Super stable 360° adjustment in 6° steps
Suitable for all SP Connect mounts with the standard damping head
Easy DIY assembly
Anti-Vibrations-Modul SP Conncet
CB12001
/ RS0
€24.95*
Attach the adhesive foil of the SP ConnectT Universal Interface directly to your smartphone or cell phone cover.
This way you can attach your cell phone to all SP Connect mounts from our range. Simply hold it on, turn the patented twist lock and you're done.
It's quicker and easier than ever to get a navigation system on your motorcycle.
3M™ adhesive foil
Secure and flat interface
Size: 66 x 55mm (2.6 x 2.17 inch)
Foot rest R9T black powder coating
CB11967
/ RS0
€130.00*
Also the footrest support plate and the heel guard, like most metal parts on the R9T's, have the unsightly die-cast surface, which does not look very noble. But we can also powder coat them black!
Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.
Many would like to have a black footrest. The first consideration would be a completely new detent system, e.g. from LSL or Rizoma, which is clearly the most beautiful solution. But if that is too expensive for you, you can get a cheap alternative by having the carrier plate and the heel protection coated in black, ordering black detents and a black gearshift (you can find suitable articles under the accessories products in this description).
You just send us your two footrest support plates + heel guard right, we sandblast them, stick all parts that have to remain free and coat them black (RAL9005)
The brake light switch is attached to the detent carrier plate with 2 notched nails ex works. These must be drilled out for coating and then hammered in again (you can order new notched nails with the switch, see accessories in this description). If you do not want to do this work yourself, you can order the article "Drill / hammer in notched nails R9T carrier plate" (see accessories in this description).
Duration until you have your part black coated again: approx. 2 - 3 weeks.
Sidecover / Airbox Cover R9T Flat Style
CB11970M
/ RS0
€64.95*
Aluminium Flat Style side cover for all BMW R nine T models.These side lids are placed in the free frame triangles of the nineT and cover the ugly plastic air box. They fit perfectly to the frame shape and look like they belong to the original bike.The slots in the lids make the parts an eye-catcher.Without such lids or a bag, the R9T area looks a bit cheap, because you have a clear view of the plastic box (a nice thing when riding open K&N filters, but not when looking at an air box).The covers are fixed with plastic clamps (black) that are clamped around the frame. Screws, clamps, a detailed step by step assembly instruction and everything else needed for the assembly is included.Available for left or right and as a set.
Frame batch BMW R nine T
CB11971M
/ RS0
€24.95*
Aluminium frame batch with nineT or R-Logo lettering for the passenger frame on all BMW R nine T models.
Many people drive their R9T without pillion frame and have the two threads open on the right & left side.Therefore we designed two nice badges which are mounted on this place.Matching black screws are including.
Foot rest R9T black powder coating
CB12112
/ RS0
€45.00*
The gear levers, like most metal parts on the R9T's, have the unattractive die-cast surface, which doesn't look very classy. But we can also coat them with black powder!
Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.
Together with the black coating of your R9T's footrest system (see accessories article in this description), you get a completely black footrest system.
You simply send us your gear lever, we sandblast it, tape all the places that have to remain free and coat it black (RAL9005).
Duration until you have your part coated black again: approx. 2 - 3 weeks.
LSL Egonia Footrests
CB11953.1M
/ RS0
€59.95*
The LSL Ergonia footrest is made of forged aluminium, finely bead blasted and finely milled on the upper side, resulting in a very noble surface finish.
Optically, the footrests are an absolute eye-catcher, the fine but not too pointed teeth provide a light cross ratchet look.
With a length of 80mm, the rests offer the perfect compromise between comfort (wide support) and sportiness (not too fast to put on). The rubber insert of the footrests can be easily removed (see photo of the green footrest). Visually, the footrest looks even more radical without the rubber. With rubber perfect for comfort and touring, without rubber for the sporty ride and aggressive look.
For mounting on the motorcycle, additional, model-specific adapters are required. Suitable adapters for the different motorcycles can be found in the accessories of this description.
Detents and adapters are equipped with ABE!
Öhlins Retro Fork BMW R nineT
CB11948M
/ RS0
€2,419.00*
Öhlins Retro Ø43mm / 800mn long for R nineT Scrambler & Urbans GS.
Öhlins offers beside their world famous upside down fork also a classic telescopic fork to convert bikes like the R9T to a high end fork without too much effort.Another advantage is that the classic style is preserved.
The forks are fully adjustable in spring preload, compression and rebound (more is not possible). The fork is the absolute best you can fit into your R9T.
To mount it on the R nine T you will need a mounting kit (see accessories in this description). The kit includes Brake caliper adapter, front wheel axle, fender mount. With this kit you have everything you need to install the fork Plug & Play in the R9T Scrambler or Urban GS.
The fork as well as the adapter set are delivered WITHOUT parts certificate. A technical drawing from Öhlins is included with the fork.We also provide a sample registration from Dekra, on which the fork is registered per §21 (single approval) on an Urban GS.
Öhlins delivers the fork with a 9,5NM spring, which is Öhlins typical quite tight (depends on the weight of the rider). If you wish, we can also use a different spring for an extra charge.
Technical data of the fork:length: 800 mm / stroke: 130 mm
Side Mount Lizenz support R9T
CB11929M
/ RS0
€199.00*
Three-part license plate holder made of 3mm aluminium or stainless steel for all BMW R nineT models, from our friendly company KRT Framework.As well as all parts, which come from KRT, also the lateral license plate holder is of the highest quality and absolutely perfectly designed.The delivery includes all mounting materials and a license plate light.The two aluminium support plates allow an assembly where screws and cables disappear. Long holes paired with three different hole patterns allow the assembly in your desired position (side and height is adjustable).There is the license plate holder with different plates for the countries (Germany, Austria, Switzerland, France, Holland, Belgium. Please choose in the selection).Dimensions of the license plates for the different countries:
Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm
Rizoma Drag Bar Handelbar
CB11903M
/ RS0
€125.00*
The 755mm wide Drag Bar Alu handlebar from Rizoma is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside.
If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look.
The handlebars are really nice flat and straight handlebars, which primarily provides a very sporty and front wheel oriented seating position. Especially the hardly existing crank makes sure that you sit relatively far forward leaned.
In addition, the very straight handlebars give every bike a really nice flat line.
As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface.
All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV.
Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.
Side Cover Leather Bags BMW R9T
CB11904M
/ RS0
€169.95*
Vintage genuine leather side covers that also act as a small bag, suitable for all BMW R nine T models.
The open frames of the R nine T's are not very nice, because you just have to look at the plastic air box. That's why we thought that it could be made nicer.So we came up with something in cooperation with a small Italian leather company. Leather side lids which are also a little thing for small things like purse, mobile phone, tools etc. What is better than an optically chic part, which is also very practical.
The handmade bags are available in a choice of vintage brown or black. The bag is fastened to the frame of the bike with three leather straps (included). Very high-quality and thick cowhide leather is used, so that the bags last a lifetime. With time the leather gets a really nice patina and the bags become even more beautiful.
The price is for one side (please choose in the selection if you want the bag for left or right).
Rizoma Taperet Handelbar
CB11905M
/ RS0
€123.00*
The Rizoma Taperet aluminum handlebar is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. The Taperet handlebar is a classic Super Bike All Rounder handlebar. The handlebar is available in 3 different versions (different dimensions and offset). See the technical drawings in the fots.
If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look.
The Taperet handlebars are just the right handlebars for everyone who is looking for a really good everyday handlebar for sporty riding, long tours and cruising.
As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface.
All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV.
Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.
ATTENTION with the MA011 handlebar: This handlebar has a rather narrow clamping area and does not fit all motorcycles (such as on a Speed Twin). Please measure the required area beforehand and compare with the dimensions on the drawing.
BMW R12 nineT:The MA006 and MA011 Plug & Play versions are suitable for this model.
Intake Cover Kit BMW R9T
CB11888M
/ RS0
€359.00*
The original and long intake snorkel of the BMW R nine T models belongs classically to the R9T, but by far not everyone likes it! On some machines it even looks like a foreign body and does not fit nicely to the shape of the tank.So our good friend Marvin from KRT Framework thought that it would be a much nicer solution. With the short intake kit there is finally a solution that replaces the much too long intake snorkel with a nice short one that fits more than perfectly to the tank shape of the R9T.
The inner snorkel in the kit ensures that cool ambient air and airflow is still sucked in and not warm ram air from under the tank. The snorkel is made of 2mm thick aluminum sheet metal, TIG welded and black satin powder coated.It is simply exchanged against the original part. There are no adjustments necessary, so your R nineT can be retrofitted at any time.
The corresponding air intake cover is made of carbon fiber using an infusion process, just like it is used in professional motorsports.Afterwards the cover is painted either in black silk matt or the original BMW color of the scrambler "Monolith metallic matt".Furthermore, the cover is still available in raw. This is then only filled and delivered ready to paint. Please choose the desired color in the selection.
The cover will be fixed to the snorkel as well as to the two original screwing points.
The cover integrates perfectly into the tank shape and makes the R nineT look sportier and more compact.
Included in the kit is an air inlet cover made of carbon fiber fabric, the inner snorkel is made of aluminum, as well as all the small material needed for mounting.A material certificate of the carbon fiber cover is also included in the delivery.
Tank Pad Leather BMW R9T Classic Seam
CB11800.1M
/ RS0
€119.00*
Beautiful leather knee pads for the tank of all BMW R Nine T models.
These tank pads have many positive aspects. They protect the paint of the tank in the knee area, the legs have a pleasant hold on the tank & it also looks really classic and cool!
The assembly of the pads is child's play. Simply degrease the knee area (e.g. with brake cleaner), determine the exact position with a measuring tape and a few adhesive strips (so that left & right are the same) and then glue the pads onto the tank with the 3M adhesive film (which is attached to the back of the pads).
The material used is consciously & deliberately NOT genuine leather. A very high quality synthetic material is used, which looks like real leather, but is much easier to clean and more durable. The pads are handmade in Canada.Matching the knee pads we also have matching seat covers, made of the same material and in the same colour in our program (see accessories in this description). This allows the style on the motorcycle to be pulled through. The leather grip tape from our range also looks very good, but it is not exactly made of the same material.
Translated with www.DeepL.com/Translator
Tank Pad Leather BMW R9T Diamond Seam
CB11801.1M
/ RS0
€119.00*
Beautiful leather knee pads, with diamond pattern for the tank of all BMW R Nine T models.
These tank pads have many positive aspects. They protect the paint of the tank in the knee area, the legs have pleasant grip on the tank & it also looks really classic and cool!
The assembly of the pads is child's play. Simply degrease the knee area (e.g. with brake cleaner), determine the exact position with a measuring tape and a few adhesive strips (so that left & right are the same) and then glue the pads onto the tank with the 3M adhesive foil (which is attached to the back of the pads).
The material used is consciously & deliberately NOT genuine leather. A very high quality synthetic material is used, which looks like real leather, but is much easier to clean and more durable. The pads are handmade in Canada.
Matching the knee pads we also have matching seat covers, made of the same material and in the same colour in our program (see accessories in this description). This allows the style on the motorcycle to be pulled through. The leather grip tape from our range also looks very good, but it is not exactly made of the same material.
The Tankpad is available in 4 different colours (please choose in the selection). They are also available in a classic seam quilting (see similar articles in this description).
Petrol canister side case 20 l.
CB11798M
/ RS0
€329.00*
Genuine 20 liter steel petrol cans that have been painstakingly converted by hand into motorcycle side bags. There is no more stylish solution for attaching a luggage case to your motorcycle!
An absolute eye-catcher on any bike and practical too! The basis for these cases is a genuine 0.9 mm thick steel petrol can (weight approx. 4.3 kg, i.e. really high quality). The canisters are painted glossy black, cut open, fitted with high-quality aluminum hinges, leather applications, edge band and tension fasteners (all done by hand). Optionally, the cases can also be lined on the inside with hard-wearing fabric (feels like suede) (our absolute recommendation - it simply looks really high-quality when you open the case and nothing scratches the inside).
The 20 liter canister measures: 467 x 166 x 346 mm (HxWxD)
The canisters are also available in 5 & 10 liter versions (see similar articles in this description).
We recommend mounting the cases together with the SW-Motech Legend Gear luggage holders from our range (these must be ordered specifically for each model. See accessories in this description).The canisters are supplied without suitable holes for the holders. If the SW-Motech holders are ordered in addition, we also supply suitable screws for mounting on the holder.To get the same hole pattern in the canisters as the Legend Gear luggage holders have, we recommend ordering our template (see accessory article in this description).
Lugguage holder BMW R9T
CB11782M
/ RS0
€19.95*
Luggage rack pair for all BMW R Nine T models.These holding lugs are simply screwed under the fastening of the frame triangle of the BMW R9T (assembly is completed within a few seconds).These holders are perfect for lashing a luggage roll onto the seat of the R9T. Absolutely practical and visually unobtrusive.The holders are available with one or 2 retaining straps and in black & silver powder coated.
Brake caliper bolts titanium BMW R Nine T
CB11776.3M
/ RS0
€39.95*
Titanium wheel bolt set for all BMW R Nine T models. Significantly lighter and with a nice look.
The alloy Ti-6AL-4V is one of the best known of all titanium alloys and is used in medicine, the aviation industry, bicycles but also in motor sports.
Advantages of the material are a very good corrosion resistance, a great appearance, high tensile strength and the weight saving compared to steel of approx. 42%. Weight per screw: approx. 20g
The screws are available in 4 different colours (titanium colours are uncoated, with all other colours the screws are coated afterwards).
The same titanium screw set is also available for the front brake calipers (see similar articles in this description).
Wheel bolt Titanium BMW R Nine T
CB11775.3M
/ RS0
€62.95*
Titanium wheel bolt set for all BMW R Nine T models. Significantly lighter and with a nice look.
The alloy Ti-6AL-4V is one of the best known of all titanium alloys and is used in medicine, the aviation industry, bicycles but also in motor sports.
Advantages of the material are a very good corrosion resistance, a great appearance, high tensile strength and the weight saving compared to steel of approx. 42%. Weight per screw: approx. 20g
The screws are available in 4 different colours (titanium colours are uncoated, with all other colours the screws are coated afterwards).
The same titanium screw set is also available for the front brake calipers (see similar articles in this description).
Oldschool Leather Luggage Suitcase
CB11701M
/ RS0
€289.95*
Classic, handmade real leather luggage bags in Old School briefcase design.Optional quick-release mounting system (must be ordered separately).The perfect companion for everyday use as well as for any longer tour. The size of the bags is the perfect compromise between beautiful appearance and usefulness. A motorcycle bag must not only be practical, it must also look good. The handbag for your motorcycle!
Dimensions: 38 x 30 x 13cm
The bags are made of genuine and very high-quality suede, which is water and dust repellent. Keeps tight in the rain for about 45 minutes. On longer motorcycle tours we recommend to put the clothes in a waterproof bag or a bag. The bags are stiff by their high material quality beautifully and retain so their angular suitcase form.
Inside the bag is the large main compartment, a laptop compartment and 3 other small pockets.Included in delivery is a shoulder strap (which is attached to the outside of the bag with 2 snap hooks).
Mounting/Fastening Recommendation: We recommend the bags using the Legend Gear SLC bag holders (see accessories in this description). These are to be ordered motorcycle model specifically) and the universal pocket adapter for the SLC holders (see accessories in this description).This gives you a modern bag system with an oldschool look that can be attached to and removed from the motorcycle with just one movement.
Alternatively, loops are also supplied with the tache. These can be placed around the rear frame of the motorcycle. At the loops are carabiners to which you can attach the bags very easily and quickly.For this, however, we recommend then additionally luggage bags to mount spacers to ensure that the bags can not get contact with the rear wheel (see accessory article in this description.
Classicbike-Raisch Badge
CB11686
/ RS0
€2.95*
Classicbike-Raisch Badge to sew on the leather jacket, the jeans on a bag or similar.The patches are sold separately.
%
T-Shirt Burnout
CB11660.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High quality T-shirt in classic, casual cut / Style: Burnout.The t-shirt has a small burnout logo on the chest and a big picture on the back with the slogan: It´s better to burn out then to fade away.See photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
%
T-Shirt Peace Love Motorcycles
CB11661.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High quality, grey T-shirt in classic, casual cut / Style: Peace Love MotorcyclesSee photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
T-Shirt Two Wheels Move The Soul
CB11662.4M
/ RS0
€19.95*
High quality, navy blue T-shirt in classic, casual cut / Style: Two Wheels Move The SoulSee photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
%
T-Shirt Too Fast
CB11663.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High quality black t-shirt in classic, casual cut / Style: Burnout.The t-shirt has a small motorcycle / cafe racer logo on the chest and a big picture on the back with the slogan: TOO FAST TO LIVE / TOO SLOW TO DIE.See photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
%
T-Shirt Two Wheels Moto
CB11664.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High-quality, black T-shirt in classic, casual cut / Style: MotoSee photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
Helmet Hanger
CB11665
/ RS0
€114.95*
Wall holder made of Hold, with leather holder for your helmet!You simply plug this holder to the wall (mounting material is included) to hang your stylish helmet on the helmet holder and hang your jacket as well as your bike key on the tool keys.Finally, beautiful bike clothing gets a worthy place and is no longer simply hung in a closed cupboard or shelf where no one can see it anymore.With this holder you can hang up your motorcycle clothes, best directly on your motorcycle in your men's world, the garage. I would say that this is the most stylish way to hang your clothes neatly away!
BMW R9T JVB Moto Racer Heck
CB11638
/ RS0
€420.00*
GFK Racer Rear suitable for all R9T models gives each R9T a completely new look.We have often been asked if there is a Plug&Play solution to completely change the rear of the R9T. Finally they are here now.The Racer rear is delivered ready to mount, including mounting material and an LED tail light (which is integrated into the rear). The assembly is also relatively simple (see assembly instructions in the downloads of this article description).This rear is made of high quality GFK and is perfect for painting.Not included in the delivery is: the cell rubber seat cushion, a license plate holder (we recommend to use a lateral one to have the nice rear as free as possible), as well as the indicator holder mounted on the photos. But you can find all these things under the accessories in this description.In addition we recommend to order the "adapter plug accessory rear light" for better wiring (also to be found in the accessories).
The JVB Moto rear fits perfectly into the design of all JVB Moto things for the BMW R9T series (air tunnel, lamp mask, R9T Racer fairing, front fender).
Adapterkabel Zubehör Rücklicht R9T
CB11641
/ RS0
€17.95*
This plug can easily be plugged Plug & Play into the original wiring harness of the R9T. It only has to be connected to the new rear light and the license plate light. In other words it is not necessary to cut off the original wiring harness. An absolute recommendation from us to facilitate the wiring.
BMW R9T Skid Plate underride guard
CB11643M
/ RS0
€189.00*
A motor protection belongs to every RnineT model. The cooling fins or the oil filter can be damaged by stone chips or when driving up and down the curb.The JvB-moto engine guard is pure minimalism - only as long and as wide as absolutely necessary!The course of the engine guard harmoniously follows the manifold line without hiding the manifold or the engine. Equipped with vibration dampers and an additional absorption mat made of rubber, the 4mm thick aluminium engine guard is ready to protect oil filters and cooling fins in the best possible way and in a material-friendly way. Avialable in silver or black.
BMW R9T Headlight Kit JVB Moto
CB11644M
/ RS0
€349.00*
JVB Moto lamp mask with headlight insert (in 4 different versions) for mounting on the R9T Classic with USD fork. Fits both Euro3 and Euro4 models.
The lamp mask is made of very high quality ABS plastic and is perfect for painting! The mask is delivered complete with all mounting materials and a suitable headlight insert.All 4 headlight versions are of course with E-number.
The lamp mask makes the R9T a completely different motorcycle! A real eye-catcher, if a R9T has no protruding headlight pot. Looks great with a sporty as well as with a radical scrambler conversion. The design of the headlight mask fits perfectly into the complete JVB Moto Bodyparts line (rear, air tunnel & fenders).
Of course the flat lamp mask looks especially good if a small Motogadget speedo (see accessories in this description) is installed (the speedo only works on Euro3 models). In addition the suitable speedo holder is then still needed (accessory).
Note version 4 headlights:This conversion kit is vehicle specific JvB-moto conversion parts and a universal LED headlight insert. The connection of the LED headlight is complicated. It must be individually connected to the existing vehicle electronics. Additional articles for connection, e.g. Art. No. 41356 or additional switches may be necessary. Due to the low power decrease of the LED headlight, it is possible that the bus system of the vehicle declares the lighting as defective and displays it as a fault in the speedometer. Due to changes in the series on the part of the vehicle manufacturer, it is not possible to prevent such an error message from the outset by an appropriate scope of supply and offer a solution in any case.If you have any doubts with regard to the installation, please contact an authorized dealer before installation and ask for advice with regard to expected problems.
BMW R)T LED Indicators
CB11635M
/ RS0
€109.00*
A few nice small LED indicators (with E-number) including metal housing. Through the metal housing, the turn signals can be screwed directly to the original fittings and are then almost no longer noticeable.Only when you turn on the turn signal again, you can see them wonderfully from the front! The turn signals are far enough from each other and therefore legal to use on the street.Much better and more inconspicuous one cannot hide the turn signals at a R9T. Everything you need for mounting is included.For a simple and trouble-free connection of the turn signals we recommend to order a turn signal plug set in addition, so that one does not have to cut off anything at the wiring harness (see accessory article in this description).
Motogadget Mo.Club 60
CB11623
/ RS0
€99.00*
Motogadget mo.view Club 60 handlebar end mirrors in a sporty classic oval design (road legal) for 22 mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They work completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly into the metal of the body. The aluminium itself is the mirror surface! This enables a weightless design without a rim or frame, and the mirror body itself is extremely thin and light. Glass breakage or glass falling out is simply not possible! A new mirror design that is unrivalled on the market, but will not be found anywhere else! These mirrors really are an absolute highlight on any motorbike!
The mirror can be mounted both upwards and downwards on the handlebars (fits left & right).
Mounting:
You can clamp the mirror directly around the handlebars (simply push the fittings inwards a little).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebars (see accessory article in this description). This extension also provides a perfect handlebar end (our absolute recommendation if no handlebar end indicators are fitted).
There is also an adapter that allows both the handlebar end mirrors and the Motogadget handlebar end indicators to be fitted without having to push the fittings further inwards. In other words, a handlebar extension that still has a mount for the M.Blace disc indicators on the outside. (See Motogadget Disc / Cone Adapter in the accessories section of this description)
The mirror arms are manufactured to the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you mount everything
Dimensions:Width of the mirror body: 114 mm Height of the mirror body: 80 mm Thickness of the mirror body without ball head: 4.5 mm Length of the mirror arm: 110 mm Diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 12 mm
The size of the mirror surface of the m.view flight complies with the StVZO and it has ECE labelling. This makes it suitable for any motorbike without registration. Price per piece.
Motogadget M.View Sport 130 Mirror
CB11624
/ RS0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625
/ RS0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Spy Mirror
CB11626
/ RS0
€99.00*
Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.View Sport Mirror
CB11630M
/ RS0
€129.00*
Motogadget M.View Sport Mirror
Are you looking for a road-legal mirror that is not only functional but also a real eye-catcher? Then the Motogadget M.View Sport Mirror is perfect for you! With its sporty, angular design, it fits any standard mirror mount with a thread. And don't worry – the appropriate mounting material (M10x1.5, M10x1.25 right- and left-hand thread) is included so that you can easily attach it to your motorbike.
Two variants – standard or XL
The mirror is available in two versions: standard and XL. What's the difference? The length of the mirror arm! The shorter arm looks super stylish, while the XL arm is ideal if your mirror mount is further in, such as on water-cooled Triumph models with 1-inch handlebars. Want a clear view behind you? Then grab the XL version! You can find the exact dimensions in the details below and on the product images.
Pure innovation – no glass, no breakage!
These mirrors are unlike anything you've seen before. Thanks to a patented technology, the M.View doesn't need any mirror glass at all. The mirror surface is integrated directly into the aluminium – the metal is the mirror! The result? An ultra-thin, rimless design without any annoying frames. Broken glass? Not a chance! This is not only innovative, but also makes the mirror an absolute design highlight for every motorcycle.
No threads? No problem!
Do you ride a bike like the Triumph Bonneville T100 without mirror threads? No problem! In the category ‘Mirrors: Accessories, Holders & Adapters’ you will find the appropriate adapters to mount the mirror without any problems. For those who prefer clean handlebars, we recommend the Motogadget M.View Bar Clamp. This allows you to easily attach the mirrors to the top or bottom of the handlebars.
Installation tips for Triumph models with 1-inch handlebars:
Particularly for Triumph models with 1-inch handlebars, such as the Bonneville LC, Bobber, Speedmaster or Scrambler 1200, you should be aware of the following: These bikes often only have a single hole in the handlebar clamp instead of a thread. No problem – with our screw kit (see accessories in this description), you can still mount the M.View mirrors. And for these models, the XL version really makes sense, as the mirror mount is often located far to the inside.
Tip for BMW R12 models:
If you value a very good rear view more than the look, we recommend ordering the XL version of the mirror. With the standard 150mm version, you can still see something to the rear, but you have to turn your shoulder a little.
Technical details at a glance:
Mirror body: width 122 mm, height 83 mm, thickness 4.5 mm
Mirror arms: standard 150 mm / XL 180 mm
StVZO-compliant: meets the legal requirements and has an ECE marking – you don't need to register it!
Price is per unit.
Motogadget M.View Club Mirror
CB11631M
/ RS0
€99.00*
Motogadget M.View Club Mirror
Are you looking for a road-legal mirror that is not only functional but also visually appealing? Then the Motogadget M.View Club Mirror is perfect for you! With its sporty, angular design, it fits any standard mirror mount with a thread. And don't worry – the appropriate mounting material (M10x1.5, M10x1.25 right- and left-hand thread) is included so that you can easily attach it to your motorbike.
Two variants – standard or XL
The mirror is available in two versions: standard and XL. What's the difference? The length of the mirror arm! The shorter arm looks super stylish, while the XL arm is ideal if your mirror mount is further in, such as on water-cooled Triumph models with 1-inch handlebars. Want a clear view behind you? Then grab the XL version! You can find the exact dimensions in the details below and on the product images.
Pure innovation – no glass, no breakage!
These mirrors are unlike anything you've seen before. Thanks to a patented technology, the M.View Club doesn't need any mirror glass at all. The mirror surface is integrated directly into the aluminium – the metal is the mirror! The result? An ultra-thin, rimless design without any annoying frames. Broken glass? Not a chance! This is not only innovative, but also makes the mirror an absolute design highlight for every motorcycle.
No threads? No problem!
Do you ride a bike like the Triumph Bonneville T100 without mirror threads? No problem! In the category ‘Mirrors: Accessories, Holders & Adapters’ you will find the appropriate adapters to mount the mirror without any problems. For those who prefer clean handlebars, we recommend the Motogadget M.View Bar Clamp. This allows you to easily attach the mirrors to the top or bottom of your handlebars.
Installation tips for Triumph models with 1-inch handlebars
Particularly with Triumph models such as the Bonneville LC, Bobber, Speedmaster or Scrambler 1200, you should be aware of the following: These bikes often only have a hole in the fitting instead of a thread. No problem – with our screw kit (see accessories), you can still mount the M.View Club mirrors. And for these models, the XL version really makes sense, because the mirror mount is often located far to the inside.
Tip for BMW R12 models:
For those for whom a very good rear view is more important than the look, we recommend ordering the XL version of the mirror. With the standard 150mm version, you can still see something to the rear, but you have to turn your shoulder a little.
Technical details at a glance:
Mirror body: Width 122 mm, height 83 mm, thickness 4.5 mm
Mirror arms: Standard 150 mm / XL 180 mm
StVZO-compliant: Meets the legal requirements and has an ECE marking – you do not need to register!
Price is per unit.
Motogadget M.View Classic Mirror
CB11632M
/ RS0
€99.00*
Motogadget M.View Classic Mirror
Are you looking for a road-legal mirror that is not only functional but also a real eye-catcher? Then the Motogadget M.View Classic Mirror is perfect for you! With its sporty, angular design, it fits any standard mirror mount with a thread. And don't worry – the appropriate mounting material (M10x1.5, M10x1.25 right- and left-hand thread) is included so that you can easily attach it to your motorbike.
Two variants – standard or XL
The mirror is available in two versions: standard and XL. What's the difference? The length of the mirror arm! The shorter arm looks super stylish, while the XL arm is ideal if your mirror mount is further in, such as on water-cooled Triumph models with 1-inch handlebars. Want a clear view to the rear? Then grab the XL version! You can find the exact dimensions below in the details and on the product images.
Pure innovation – no glass, no breakage!
These mirrors are unlike anything you've seen before. Thanks to a patented technology, the M.View Classic does not require any mirror glass at all. The mirror surface is directly incorporated into the aluminium – the metal is the mirror! The result? An ultra-thin, rimless design without any annoying frames. Broken glass? Not a chance! This is not only innovative, but also makes the mirror an absolute design highlight for every motorcycle.
No threads? No problem!
Do you ride a bike like the Triumph Bonneville T100 without mirror threads? No problem! In the category ‘Mirrors: Accessories, Holders & Adapters’ you will find the appropriate adapters to easily mount the mirror. For those who prefer clean handlebars, we recommend the Motogadget M.View Bar Clamp. This allows you to easily attach the mirrors to the top or bottom of the handlebars.
Installation tips for Triumph riders
Particularly with Triumph models such as the Bonneville LC, Bobber, Speedmaster or Scrambler 1200, you should be aware of the following: These bikes often only have a hole in the fitting instead of a thread. No problem – with our screw kit (see accessories) you can still mount the M.View Classic mirrors. And the XL version really makes sense for these models, as the mirror mount is often located far to the inside.
Tip for BMW R12 models:
For those who value a very good rear view more than the look, we recommend ordering the XL version of the mirror. With the standard 150mm version, you can still see something to the rear, but you have to turn your shoulder a little.
Technical details at a glance:
Mirror body: width 122 mm, height 83 mm, thickness 4.5 mm
Mirror arms: standard 150 mm / XL 180 mm
StVZO-compliant: meets the legal requirements and has an ECE marking – you don't need to register it!
Price is per unit.
Motogadget M.View Bar Clamp Mirror Adapter
CB11633
/ RS0
€29.00*
The M.View Bar Clamp mirror adapters allow the mounting of all mirrors with M10 x 1.25 thread (this is the standard thread for accessory mirrors) on motorcycles without a mirror thread in the fittings. Or for customizers who want to give their handlebars a clean look and want to replace the original shots-Perfectly suitable are the beautiful M.View mirrors from our program (see accessories in this description). With these adapters the mirrors can be mounted both upwards and downwards (if there is enough space for the tank).The m.view bar clamp is delivered as a single piece. It fits perfectly to our handles m.grip, the handlebar end indicator m.blaze disc as well as the push button fittings m.switch and m.switch mini. The assembly takes place directly on the handlebar tube (22 mm, 7/8 and 1 inch).For two mirrors please order 2 m.view bar clamps.
Motogadget M.View Race Mirror
CB11678M
/ RS0
€129.00*
Motogadget M.View Race mirror (street legal with ECE!) in an angular design for all who like it sporty towards racers, as the name already says. Suitable for any normal mirror mount with thread. In the scope of supply different threads are contained (1x screw M10x1,5, 1x screw M10x1,25 right thread, 1x screw M10x1,25 left thread), in order to be able to mount the mirror also at each Bike, which has a mirror thread.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without a mirror thread (like e.g. a Triumph Bonneville T100), you will find suitable adapters for your motorcycle in the category "Mirrors: Accessories, holders & adapters". If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This makes it possible to mount the mirrors on the handlebars both upwards and downwards.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).
DimensionsWidth of mirror body: 129 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: 150 mmWeight: 175 gThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE mark. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Sport 60
CB11835
/ RS0
€129.00*
Motogadget M.View Sport handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.
Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g
The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Motogadget M.View Cruise Mirror
CB11836
/ RS0
€99.00*
Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.
Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g
Price per piece.
Motogadget Mo.View Classic 60 Mirror
CB11837
/ RS0
€99.00*
Motogadget Mo.View Classic 60 handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything
Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g
Price per unit.
Motogadget M.View Blade Mirror
CB12543
/ RS0
€99.00*
Motogadget M.View Blade handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view blade does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
K&N Air Filter Dummies
CB11611
/ RS0
€174.95*
K&N air filter dummies pair. For the look as if open single air filters had been used, but this was 100% legal. Fits to all R9T models. Since the original K&N air filters are unfortunately not exactly cheap (alone the cost over 130€) the quite high price comes about.In the meantime we have been asked very often if it would not be possible to use beautiful K&N single air filters on the R9T for optical reasons. Of course everything BUT goes BUT: 1. it is a huge effort to build out the whole AirBox & 2. it is absolutely illegal.So we thought about making dummies out of original K&N air filters, which are then pushed over the original intake hose and fixed with the supplied clamp. Therefore we cut the filters on the back & seal the interface neatly again, so that the filters can not tear further.Optically an absolute highlight at every R9T!The assembly of the filters is very simple & self-explanatory.Right from the start we say fair to the fact that you lie very slightly against the filter when riding with your legs (but it's not disturbing, you just have to get used to it a little).
Leather Key Fob
CB11594M
/ RS0
€20.95*
A very solid & high quality genuine leather key fob, with a thick metal hook in antique gold.
We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this description).
Leather Key Fob
CB11595M
/ RS0
€35.95*
Genuine leather strap with solid snap hook in antique gold tone. The strap is perfect to attach it on one side to your biker wallet, and on the other side to your trousers. So nobody can steal your wallet anymore and it also looks noble.You can also use the strap as a key ring.
We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this description).
Shoe Protector
CB11596M
/ RS0
€34.95*
Protect your good pedals from the gear lever! These shoe protectors made of real leather, you simply pull yourself over the shoe to protect it. Who doesn't know it? A fast round with the good shoes and zack one has a Macke in the shoe....
Shoe Safer Leather
CB12026M
/ RS0
€24.95*
Protect your good kicks from the gearshift!A somewhat simpler variant to the shoe protectors we already have in the program.Do not look quite as chic as the shoe protector, but fulfill their purpose just the same and are even easier to put on. Are held only with an elastic band. Made in Italy.
Shoe Protector Slip on
CB12299M
/ RS0
€34.95*
Protect your good kicks from the gearshift!
These shoe protectors made of genuine leather you simply pull over your shoe to protect it. Who does not know it? A quick round with the good shoes and bang you have a quirk in the shoe ...
The slip on version of the leather shoe protectors can be pulled over particularly quickly and are particularly well suited for boots. Due to the adjustable elastic straps, the protectors are suitable for any size of shoes.
Handelbar tape geniune leather
CB11591M
/ RS0
€37.95*
That's oldschool! Handlebar grips which are wrapped from genuine leather tape!That was otherwise only possible with a lot of manual work (and high costs) with a upholsterer.Now there is leather tape to wrap for everyone! The tape is equipped with 3M adhesive tape on the inside, so it simply sticks to the handlebar when winding. The tape is simply wrapped directly onto the handlebar & grass grip sleeve (if you don't want the grip so thick), or over the existing grip rubbers.The tape is pre-cut at the ends to fit, so that a nice winding pattern is easily added.
We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar articles in this description).Here's a video on how to wrap the ribbon in the best possible way.