Motogadget M.View Cruise Mirror

Product information "Motogadget M.View Cruise Mirror"

Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.

These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!
These mirrors are really an absolute highlight on every motorcycle!

The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.

Mounting:

  • You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this). 
  • Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
  • In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).

Info BMW R nine T models: 
For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).

The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.

Dimensions:
Width of mirror body: 114 mm
Height of mirror body: 80 mm
Thickness of mirror body without ball head: 4,5 mm
Length of mirror arm: 60 mm
Clamping diameter: suitable for 22 mm and 1 inch handlebars
Clamping width: 10 mm
Weight: 125 g

Price per piece.

Models BMW R nineT:
  • R nineT /5 EU 4
  • R nineT Classic EU 3
  • R nineT Classic EU 4
  • R nineT Pure EU 4
  • R nineT Racer EU 4
  • R nineT Scrambler EU 4
  • R nineT Scrambler EU 4.
  • R nineT Urban GS EU 4
Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Speedmaster / America
  • Thruxton 900 EFI
  • Thruxton Vergaser
Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Bonneville T100
  • Bonneville T120
  • Scrambler 1200 XC
  • Scrambler 1200 XE
  • Speed Twin - 1200
  • Speedmaster
  • Street Cup
  • Street Scrambler
  • Street Twin
  • Thruxton 1200
  • Thruxton 1200 R
  • Thruxton 1200 RS
BMW R nineT
R nineT /5 EU 4
R nineT Classic EU 3
R nineT Classic EU 4
R nineT Classic EU 5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
BMW R12
R12 Crusiser
R12 nineT
Triumph 400er
Scrambler 400 X
Speed 400
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Fitting clamp without mirror thread BMW R9T Milled CB12102M / RS0
This CNC machined aluminum clamp replaces the original armature clamps. Fits all for all BMW R9T models. This makes sense when you convert the motorcycles to handlebar end mirrors, because otherwise you look at the open mirror thread of the original clamp. In addition, the clamps make optically also really what her through their high-quality surface and the milled BMW logo. Of course, this is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time. The adapters are black anodized & in the aftermath, the BMW logo is milled again. The clamps look very classy on the handlebars.The new version of the adapter is in a Galsperlen blasted Black Peark optics. The surface is roughened before anodizing, thereby wirk dir surface even more noble and the part shimmers even in sunlight no longer in other colors, as you know it from many anodized parts. In addition, this surface fits perfectly with the fittings of the BMW motorcycles. The adapters are sold individually. Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.

From €38.95*
Motogadget M.View Bar Adapter Triumph CB12269 / RS600
The Motogadget M.View Bar Adapter Triumph, allows you to mount all Motogadget bar end mirrors on the original handlebars of your Triumph. These caps have an M6 thread and can be screwed into the thread of the original handlebars. The mirror is then simply clamped around the end of the original handlebars. Since most Triumph fittings are not mounted all the way on the outside of the handlebars, but a bit to the inside, the Motogadget caps do not have a concave shape. This ensures that there is not a large gap between the mirror, the armature and the end of the handlebar. The cap has the exact matching outer diameter as well as the exact same design as the clamps of the Motogadget handlebar end mirrors, which ensures a perfect transition.  

€39.00*
Motogadget Handlebar Indicator M.Blaze Disc CB11132.2M / RS600
Noble handlebar end turn signals from Motogadget. The housing is CNC machined from aluminum. Because the indicators are so flat and have a clear glass, they are as good as not noticeable. Nestle by the appropriate size very perfectly to most handlebar grips. Are very visible from the front and are also seen from behind (for behind, however, they are not recognized in the StvO as turn signals). Fit all handlebar sizes accessory handlebars with an Inndendurchmesser of 14mm - 21mm. In most original handlebars fit the turn signals unfortunately not. For BMW R nineT models, however, there are suitable adapters for the original handlebar (see accessory article in this description). More elegant and cleverly solved you can not install a turn signal for the front. The aluminum housing in conjunction with the clear glass pane is an absolute eye-catcher.To get a particularly clean front, we recommend the Motogadget turn signals in combination with the perfectly matching handlebar end mirrors from Motogadget to combine. Matching adapters for this, in order not to have to move the fittings on the handlebars, are of course also available from Motogadget (everything can be found under the accessories in this description).If you want it to be perfect, you can order the matching handlebar grips (in the same diameter as the turn signals) from Motogadget. The optical turn signal counterpart for the rear (Motogadget Pin) can be found in the accessories of this description. For easy installation of the turn signals, we recommend model-specific turn signal plugs, so that nothing has to be cut off the original wiring harness.

From €99.95*
Motogadget M.Grip Metal Handles CB11628 / RS0
Colour: Polished
The M.Grip is a universal aluminium handlebar for all common handlebar diameters with 1 inch or 22 mm (7/8 inch) tube diameter.These grips are perfect in conjunction with the Motogadget handlebar ends mirrors & turn signals, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & turn signals can be found in the accessories of this description).Aluminium CNC milled.The clamping of the grip sleeve is concealed from the outside by a screwed inner ring. This clamping on handlebars or throttle grip is done precisely by 6 set screws made of stainless steel.The block profiling in the hand area creates a very good grip feeling.Always 2 grip sleeves are delivered as a pair.If replacement is required, individual grip sleeves can also be supplied on request. If you prefer rubber grips, you will find the same design in the m.grip soft.Important: If in doubt, please measure the inner part of the throttle grip. This should be less than 29 mm.Please always order the end caps m.grip cap separately if you want to use the handles without m.blaze disc or cone.

€139.00*
Motogadget M.View Bar Adapter Cap BMW R9T CB11863 / RS1
A pair of Motogadget handlebar extensions specially designed for all BMW R nine T models, which allow all Motogadget M.View handlebar end mirrors to be mounted on the handlebars without having to move the instruments further inwards. In addition, the adapters in combination with the Motogadget handlebar end mirrors offer a perfect handlebar end (see photos).The adapter creates a clamping surface for the bar end mirror outside the steering tube. Suitable for all Motogadget bar end mirrors. We also recommend the Motogadget handlebar grips, which have exactly the same outer dimensions as the mirrors and the adapters, then you have a completely clean line on the handlebar.The special adapters, developed for the R nine T models, allows a very easy and very fast mounting on the original handlebars of the BMW. Simply remove the original bar end caps from the handlebar screws and screw the new Motogadget adapters into the original handlebar. Fits all BMW handlebars with M12 thread Total length: approx. 47 mmwidth of the clamping surface for mirrors: 8 mm, fits all mo.view handlebar mirrors diameter of the clamping surface: 1 inch, fits all mo.view handlebar mirrors Weight (1 piece): approx. 50 g The adapters are supplied as pairs.

€59.00*
Motogadget Disc / Cone Adapter CB12033 / RS600
Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted without having to move the fittings on the handlebars further inwards.In addition, the Motogadget M.Blaze Disc handlebar end turn signal can be mounted on the outside of the adapter. It creates a clamping surface for the handlebar end mirror outside the steering tube and at the same time allows the mounting of the handlebar end turn signal. Whether for the mo.view blade, mo.view spy, mo.view flight, mo.view cafe, mo.view road, mo.view pace, mo.view cruise as well as mo.view street. It is CNC machined from billet aluminum and anodized black. The clamping in the handlebar end is done by tightening a M6 screw inside the adapter, which expands the clamping pieces and allows a stable mounting. Then the mirror clamp on the adapter is tightened and thus simultaneously clamped the handlebar end turn signal. The bar adapter uni disc/cone comes with two clamps for the left and right side of the handlebar. They fit perfectly to our grips mo.grip as well as the push button fittings mo.switch basic and mo.switch mini. They are mounted directly in the end of the handlebar (22 mm, 7/8 and 1 inch) with a free inner diameter of 12 to 21 mm (without internal thread) and a length of 90 mm. Dimensions:Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mm.Total length: approx. 105 mm, at least 90 mm free inner tube length requiredWidth of clamping surface for mirror: 8 mm, fits all mo.view handlebar end mirrors Diameter of clamping surface: 1 inch, fits all mo.view handlebar end mirrors Weight (1 piece): 55 g Scope of delivery:2 x bar adapter uni disc/cone, instructions Attention does not fit on motorbikes with original handlebars that are not hollow from the inside (which is the case with almost all original handlebars).

€99.00*
Fitting clamp without mirror thread Triumph Milled CB12228 / RS0
This CNC machined aluminum clamp replaces the original armature clamps. Fits all for all Triumph models with 22mm handlebars. This makes sense when you convert the motorcycles to handlebar end mirrors, because otherwise you look at the open mirror thread of the original clamp. In addition, the clamps make optically also really what her through their high-quality surface and the milled T - logo. Of course, this is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time. The adapters are black anodized & in the follow-up, the T - logo is milled again. The clamps look very classy on the handlebars. The adapters are sold individually.

€39.95*
Motogadget M.View Bar Adapter handlebar extension CB11627 / RS1
A pair of Motogadget handlebar extensions that allow all Motogadget M.View handlebar end mirrors to be mounted on the handlebars without having to move the fittings further inwards. Furthermore, the adapters in combination with the Motogadget bar end mirrors offer a perfect handlebar end (see photos).The adapter creates a clamping surface for the handlebar end mirror outside of the steering tube. Suitable for all Motogaadget bar end mirrors (see accessories in this description).The adapters are simply pushed into the handlebars (handlebars must be hollow from the inside, which is not the case with most original handlebars). Fits all handlebars with 22 mm, 7/8 and 1 inch with a free inner diameter of 12 to 21 mmTotal length: approx. 45 mm, at least 30 mm free inner tube length requiredwidth of the clamping surface for mirrors: 8 mm, fits all m.view handlebar end mirrors diameter of the clamping surface: 1 inch, fits all m.view handlebar end mirrors

€59.00*
Motogadget M.Grip Soft Handles CB11629M / RS0
The m.grip soft is a universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in an attractive look.These grips are perfect in combination with the Motogadget handlebar ends mirrors & indicators, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & indicators can be found in the accessories of this description).

From €39.00*
Motogadget M.View Bar Adapter Disc BMW R9T CB11864 / RS1
A pair of Motogadget handlebar extensions + mounting for Motogadget Disc handlebar end mirrors especially designed for all BMW R nine T models, which allows to mount all Motogadget M.View handlebar end mirrors on the handlebars without having to move the instruments further inwards. In addition, the Motogadget Disc handlebar end indicator is clicked onto the end of the adapter. This ensures an absolutely perfect and transition free line! Furthermore the adapters in combination with the Motogadget handlebar end mirrors offer a perfect handlebar end (see photos). The adapter creates a clamping surface for the bar end mirror outside of the steering tube. Suitable for all Motogadget bar end mirrors. We also recommend the Motogadget handlebar grips, which have exactly the same outer dimensions as the mirrors and the adapters, then you have a completely clean line on the handlebar. The special adapters, developed for the R nine T models, allows a very easy and very fast mounting on the original handlebars of the BMW. Simply remove the original bar end caps from the handlebar screws and screw the new Motogadget adapters into the original handlebar. Fits all BMW handlebars with M12 thread Total length: approx. 47 mmwidth of the clamping surface for mirrors: 8 mm, fits all mo.view handlebar mirrors diameter of the clamping surface: 1 inch, fits all mo.view handlebar mirrors Weight (1 piece): approx. 50 g The adapters are supplied as pairs.

€59.00*

Ähnliche Artikel

Motogadget M.View Cruise Mirror - FLIP CB12445 / RS1
Motogadget M.View Cruise FLIP handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars. The Flip version is a further development of the normal handlebar end mirrors from Motogadget. The difference is that the FLIP version has a pivoting mirror arm with defined detent angles at 45° intervals.This allows the mirror to be pivoted upwards if necessary without changing the setting of the mirror. E.g. for narrow passages or space problems in the garage. The detent is designed to be very stable and cannot occur unintentionally. These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle! The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position. Mounting: You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).  Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted). In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description). Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators). The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything. Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g Price per piece.

€129.00*