No results were found for the filter!
The Magura Mx handlebar is the handlebar that gives the rider the most control and power over the motorcycle and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also comfortable sitting position....
€119.95 *
CB11667
The crossbar is slightly flatter, wider and slightly less offset to the rider than the original handlebar (original width is 780mm). The handlebars provide a front wheel oriented seating position that gives the rider more control over...
€89.95 *
CB11508
The Fat Bar handlebar is as wide as the original BMW R9T handlebar. However, it is a bit flatter and grader than the original. So you get a more front wheel oriented seating position and optically a flatter line. The Fat Bar is similar...
€89.95 *
CB11668
The Naked Bar lies between the original handlebar and the CrossBar a little bit flatter than the original one & slightly wider (790mm) than the original one (original width is 780mm). However, the handlebar does not rise as steeply to...
€89.95 *
CB11509
Tour X-bar handlebar XB 3 Dimensions: 780x200 x 85 The perfect allrounder handlebar for all R9T´s . You sit much more relaxed on the motorcycle, making it much more suitable for touring. In addition, the bike is more controllable &...
€89.95 *
CB10633
An absolute must for anyone who wants to make his R9T a real CafeRacer. Because this is simply a mute bucket, there is no way around! These give the R9T a nice flat and coherent line, as it is for a CafeRacer. The highest quality in the...
€429.00 *
CB11240
Ac Schnitzer Superbike handlebar conversion kit for BMW R Nine T Racer Many R9T Racer riders complain about the uncomfortable seating position of the Racer. This is because the R Nine T has a rather long fuel tank and the stubs sit quite...
€519.00 * €549.00 *
CB11792
LSL mute bucket conversion. An absolute must for all those from their R9T want to make a really nice Cafe Racer conversion, because it simply belongs to a stub. Speedmatch Clamps 55mm, CNC-milled. Available in silver or black. Also...
From €279.00 *
CB10632
The conversion includes a ready-to-mount clip-on handlebar KIT including a new CNC-milled, upper triple clamp in gp Racing style and all additional attachments required. After mounting, the handlebar stems are about 5 cm higher than the...
€509.00 *
CB11479
Rizoma Crossbar for the R9T original handlebar in SixDays design. The high-quality strut offends on the one hand the handlebar but provides much more for a cool look. Especially suitable for every Scrambler conversion. Also looks very...
€129.00 *
CB11382
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is...
€40.50 *
CB11312
High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually...
€50.50 *
CB11310
For all Fatbar Handlebars (R9T & Scrambler) For all Fatbar accessories handlebars as used on all R9T models (does not fit the original handlebar) The price is for one pair.
€29.95 *
CB10636.1
Serve as a cover for the handlebars on the original fork bridge of the R9T. To cover when a mute bucket is installed.
€39.95 *
CB11127
CNC milled aluminium handlebar end caps of the noble brand Roland Sands for all BMW R9T models. The milled handlebar end weights replace the cheap plastic parts on the original handlebars of your R9T. Simply unscrew the original ones,...
From €65.00 *
CB11649
NEW
Real leather bag for mounting on cross handlebars or a handlebar cross brace. Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your...
€99.95 *
CB11883
LSL handlebar weights chrome or black for 1", 22mm and FatBar (all R9T models) Alu handlebar pair. The internal thread of the original handlebar must be removed or drilled out.
€24.95 *
CB10924
When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place. Since it is not easy to drill a hole in round material (like a handlebar)...
€29.95 *
CB11752
CNC milled handlebar risers for BMW R9T Scrambler & R9T Urbang GS. They also fit the R9T Classic & R9T Pure (but these models are not listed in the parts certificate, you have to try to get them registered by single acceptance). These...
€199.00 *
CB11531
A set of CNC milled single clamps for all R9T models in silver. Ensure a cleaner look than with the large original clamp.
€99.00 *
CB11533
A set of CNC milled single clamps for all R9T models in silver. Ensure a cleaner look than with the large original clamp.
€89.00 *
CB11532
Viewed